“What is the dimension between the feet? IE overall depth is 20-1/2" but if I had a narrower stand (with room for the excess to "hang over" what is the minimum depth to have the feet sit on a surface?”
Answer This Question
1-3 of 3 Answers
Hi Tawnya. The depth measurements between the farthest edges of the feet (so the feet would be 100% standing on the surface you have) are: Depth - 14 1/4", Width (harder for me to measure because it's on a rug) is 20" or potentially a drop less. Hope that answers your question!
Sorry, there was a problem. Please try again later.Just bought one and measured it. Foot to foot on center, width is 19". Depth (front to back) is 15" foot to foot on center. The back "feet" are not really "feet" per se...the compressor coils are back there so it's really two bigger (wider) metal shoes, and the front has 2 small plastic feet that twist to allow for angle changes. I found a 20"x20" minifridge silicone mat on Amazon that I'm going to put under the fridge. It has low enough sides to allow for door opening, whereas many of the boot trays and oil change trays there have sides that are too high.
Sorry, there was a problem. Please try again later.14 INCHES
Sorry, there was a problem. Please try again later.