“What type of drill should you use to screw the screws in that hold up the mount?”
Answer This Question
1-1 of 1 Answer
To install the Insignia™ Universal Projector Ceiling Mount, you should use a 10mm drill bit for drilling the holes. Here are the steps: 1. Mark the Positions: Use the mount as a template to mark where you need to drill. 2. Drill the Holes: Use a 10mm drill bit to drill holes 50mm deep at the marked positions. 3. Insert Metal Anchors: Insert the provided metal anchors into the drilled holes until they are flush with the ceiling. 4. Secure the Mount: Tighten the screws to secure the mount to the ceiling. Make sure to follow the instructions provided in the user manual for a safe and secure installation. If you have any questions or need further assistance, please don't hesitate to reach out. Thank you for choosing Insignia! - Emman | Insignia Support | https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
Sorry, there was a problem. Please try again later.