A:AnswerIf this is an older turntable, you will probably need a phono pre-amp which you would need to have anyway to connect the turntable to one of today's receivers. In the "old" days, receivers had a phono input which had this pre-amp built into it. Cassette decks and CD players do not need these additional pre-amps. I am using one of these devices to get my 1980's Sony turntable to work with a newer receiver I bought a few years ago. The pre-amp is not that expensive and can be found on the radio shack website, and probably on Best Buy's as well. Once you have the pre-amp, it ought enable the turntable to work with the Knomo speakers since the Knomo speakers have an internal amplifier.
Good Luck!
A:AnswerEric,
Our speaker are powered so you cannot amplify them. If your receiver has pre-outs you can connect our speakers to it. Feel free to contact us directly using the support button on our website if you want to discuss your setup a bit more, thanks.
A:AnswerThanks for your question. There is an AUX input on the YU2s which will more than likely make it compatible with the system. If you have any other questions, reach out to us directly by clicking the support button on our website. Cheers.
A:AnswerHi Will, The YU2's are made with real bamboo, not a veneer or fake bamboo. Hope that helps! If you have any other questions, feel free to contact us directly using the support button on our website and we'll be happy to help.
