How do I put this model into descale mode? null

Thank you for your question. The complete Use and Care Guide with detailed descaling instructions can be found on the Support page of the Keurig website. We have included them below as well: STEP 1: Prepare the Brewer Pour the entire bottle of Keurig Descaling Solution into an empty water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Do not insert a K-Cup pod. Place a large mug on the drip tray. STEP 2: Descale the Brewer To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the 12oz button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew until the ADD WATER light illuminates. STEP 3: Fresh Water Rinse Empty the water reservoir, rinse the tank, and refill to the MAX FILL line with fresh water. When flashing, press the 12oz button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew 12oz until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use!

To speed up the process of turning off the descale light and save money only use about 1-1/2 cups of water in both the descale mode and rinse mode. Do not fill up the water reservoir just run the 1-1/2 cups of water until the Add Water light comes on.

There is a Descale Light button at the bottom that will illuminate when it needs to be descaled

“How do I put this model into descale mode?”

Asked by Daffy 1 year ago

Answer This Question

See all questions & answers

Keurig - K-Iced Single Serve K-Cup Pod Coffee Maker - Gray-Front_Standard

1-3 of 3 Answers

Thank you for your question. The complete Use and Care Guide with detailed descaling instructions can be found on the Support page of the Keurig website. We have included them below as well: STEP 1: Prepare the Brewer Pour the entire bottle of Keurig Descaling Solution into an empty water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Do not insert a K-Cup pod. Place a large mug on the drip tray. STEP 2: Descale the Brewer To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the 12oz button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew until the ADD WATER light illuminates. STEP 3: Fresh Water Rinse Empty the water reservoir, rinse the tank, and refill to the MAX FILL line with fresh water. When flashing, press the 12oz button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew 12oz until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use!
Answered by Keurig Care 1 year ago
Sorry, there was a problem. Please try again later.
To speed up the process of turning off the descale light and save money only use about 1-1/2 cups of water in both the descale mode and rinse mode. Do not fill up the water reservoir just run the 1-1/2 cups of water until the Add Water light comes on.
Answered by Anonymous 3 months ago
Sorry, there was a problem. Please try again later.
There is a Descale Light button at the bottom that will illuminate when it needs to be descaled
Answered by Oldiesgirl 1 year ago
Sorry, there was a problem. Please try again later.