My backup camera is connected to my reverse light, red to power and black to ground. I also hooked up the yellow end to the back of the receiver. What do I do with the red wire on the camera line and a purple/white wire labeled reverse in on the receiver? null

Question

SonyListens · Accepted Answer

Hi Maxtime11,

Thank you for your inquiry. Because of the number of variables encountered with different makes and models of automobiles, Sony is unable to assist with the installation of car stereo and mobile audio systems. However, if you are using a wiring harness, further information about the wire color and function of each pin on the wiring harness is available. Refer to the following article:
https://www.sony.com/electronics/support/articles/00028631

For best assistance and to confirm the compatibility, please contact a qualified, professional installer.

I hope this helps!

Best regards,

Romeo

“My backup camera is connected to my reverse light, red to power and black to ground. I also hooked up the yellow end to the back of the receiver. What do I do with the red wire on the camera line and a purple/white wire labeled reverse in on the receiver?”

1-1 of 1 Answer