“Hello i have a quick question, with geek squad protection can i bring in my speaker for a replacement if the audio quality had degraded and the subs aren't performing as well as they used to?”
Answer This Question
1-3 of 3 Answers
Very good
Sorry, there was a problem. Please try again later.Hi Speaker, Thank you for reaching out. Please contact Best buy's Geek squad to inquire about their replacement process with regard to audio quality issues with your Sony XP700. In the meantime, I'd recommend performing some troubleshooting steps below to isolate and resolve the audio quality issues you're experiencing with your speaker: Check that both the speaker and the connected device are turned on. Turn up the volume of the speaker and the connected device. Check that the connected device is playing. Make sure the audio cable and the USB device is disconnected from the AUDIO IN jack and the PLAY/CHARGE port (USB1) during playback in BLUETOOTH mode. Make sure the audio cable is firmly connected to the AUDIO IN jack during playback in AUDIO IN mode. If you are connecting a computer to the speaker, make sure the audio output setting of the computer is set for a BLUETOOTH device. Check that the speaker has established BLUETOOTH connection with the BLUETOOTH device. Pair the speaker and the BLUETOOTH device again. If the device that is connected to the AUDIO IN jack is monaural, sound may only be output from the left speaker component (left channel). When the orientation of SRS-XP700 is changed, the top two tweeters in horizontal or vertical orientation are automatically selected for left and right channel audio output. The tweeter on the rear is enabled only when SRS-XP700 is in vertical orientation. If the connected device has an equalizer function, set it to off. Keep the speaker away from a microwave oven, Wi-Fi®, etc. Bring the BLUETOOTH device closer to the speaker. If there is any obstacle between the speaker and the BLUETOOTH device, move it out of the way. If the CHARGE indicator flashes slowly, turn off the speaker and charge the built-in battery sufficiently. A device with a built-in radio or tuner cannot be connected to the speaker via BLUETOOTH since noise may occur in broadcasts. Locate the speaker farther away from a TV, radio or tuner, etc. since noise may occur in broadcasts. When using the Stereo Pair function or Party Connect function, if any other BLUETOOTH device(s) such as a BLUETOOTH mouse or BLUETOOTH keyboard is connected to the BLUETOOTH device, terminate the connection between them. There are some BLUETOOTH devices that can have the wireless playback quality changed. If your device is compatible with this function, select “Priority on sound connection (SBC)” over sound quality. For details, refer to the operating instructions supplied with the device. Select “Priority on sound connection (SBC)” for the wireless playback quality of the speaker. Install the latest version of “Sony | Music Center” on the connected device. If you cannot use the latest version of “Sony | Music Center” or you cannot connect the speaker and a BLUETOOTH device via BLUETOOTH connection, uninstall “Sony | Music Center” and install it again. Should you need further assistance, please contact us. Unfortunately, due to the current Bestbuy phishing protocol for your protection, we cannot provide a direct email or phone number for customer support as of now. Please find Sony Electronics' Support information: Go to our support website > click on “Support” > scroll down click on “Contact Support” > click on [Product Type] and from there you'll see different ways to reach us. Regards, Sam
Sorry, there was a problem. Please try again later.Absolutely, as a total tech member, which I suggest that you consider being. You can return it in a timely manner. I’ve never made a purchase that bestbuy hasn’t stood by whatever guarantee they offer.
Sorry, there was a problem. Please try again later.