A:Answer It does have three half circle holes for cable management. These holes are cut out on the center vertical edge of each of the three back pieces (one per piece). So depending on which way you install the back pieces, it will either be on the top or the bottom center of each back piece. There are 3 separate back pieces, for left, right and middle shelving sections. The holes are not very big, but do offer enough space to route some cables through. One word of advice, use hole saws, connected to a power drill to cut holes, and only cut from the inside of the cabinet. If you cut this way, you will have clean looking holes from the inside,. They are not easy to cut, with manual tools, and will be unsightly after you finish, I figured that out the hard way. If you cut from the back side, going in, the wood grain outer decorative paper, will tear and you will have unsightly marks.
