I have the RS202 receiver, how can I hook my (Smart) TV to go through the receiver. Any information would be helpful.
Thanks null

Question

I have the RS202 receiver, how can I hook my (Smart) TV to go through the receiver. Any information would be helpful.
Thanks null

Eric · Accepted Answer

If your TV has an analog audio output you can connect to the rear. Or if your tv has a Blue tooth output you may be able to connect with the receiver. otherwise no .

SLP01 · Answer

This particular receiver wasn't truly designed for this purpose (as it's a basic stereo receiver) but you can listen to audio from the TV by connecting a standard (analog) audio cable from the TV to one of the available inputs on the receiver. You would then just switch to that input to access the audio from the TV. That's assuming the TV has an analog audio output. If the TV has an analog audio output, it should also have an option to turn off the TV speakers. This feature would be accessible through the TV's menu. You would then control the volume using the receiver's remote control.
If your TV is Bluetooth enabled, it can be connected wirelessly to the receiver. Information regarding this is on page 13 of the receiver's owners manual.

JohnS · Answer

If your TV has an optic out (Toslink) connection. You can buy a Toslink to RCA converter cable and connect them that way. That`s what I did. they are inexpensive onn Amazon.

BestBuyer · Answer

Use RCA plugs (the ones that are typically red and white) from the audio output of your TV to one of the inputs of the receiver

“I have the RS202 receiver, how can I hook my (Smart) TV to go through the receiver. Any information would be helpful. Thanks”

1-4 of 4 Answers