Customer Ratings & Reviews

The Hydro Series H60 is an all-in-one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED-lit pump head. ... With tool-free easy installation and CORSAIR engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet.

Bought it this morning and it was a breeze to install. You don't even have to remove the motherboard for an AMD application. Booted up and temps were sitting at about 15-20C cooler.

This is the perfect little cooler for my AMD 2700 I built for my son. The mounting was simple and it came with the paste pre-applied to make things easier. I do recommend a second person when setting installing it as it makes it easier to mount, at least in the MB I was using as second person can hold the cooler in place while I latched it down. I did change the fans out, as I find the standard Corsair fan included a bit loud. Otherwise the pump doesn't seem to make an audible noise for me and the cooling on it is great is even under load and a mild overclock the system performs as expected and doesn't break a sweat, keeps the chips temps in the 60 degree range. If you want something simple and will fit in most cases,since its a 120, usually the exhust will be able to house, this radiator will work wonders.

This is my 1st water cooler and I love it. So far it has kept my Ryzen 5 2600x below 35. It’s nice and quiet!! It was a little complicated to install because my motherboard sits horizontal instead of vertical but should be simple to install in a regular case. Def worth upgrading from a stock cooler to water cooler!!!

This is the first liquid cooler I have installed. It was really easy, and instructions were clear and concise. The only issue is trying to fit it in and around the space available, but the would be the situation for most of these. Unit keeps my CPU cool. I would recommend this to others.

This was purchased to cool an i7 cpu and it’s been working great. The temperatures are within satisfactory ranges even when gaming. Pleased with the purchase.

I purchased the cooling system for my son's gaming computer. The processor at idle sits at 27 C. The more the CPU is worked, the cooler the temps. There is a pad of thermal grease already applied to the heat sink. No need to purchase any. Very quiet for the job that it performs. I recommend it.

Easy to install with multiple bracket types for multiple processor types. Came with thermal paste pre-applied to the heat sink making it a plug and play type installation. The pump is quiet and it keeps my cpu at the low end of the temperature range.

Open motherboard. Intel i7 4790K 4.4Ghz Low 28c idle Peak 78c Minecraft custom Medium-High setting. This is perfect for a stock to light over clock build in replacement of air cooling, setup was very quick.

I bought this cooler in a pinch due to h80i not fitting in my mini itx case. The h60 is a great cooler for a small form factor case. Don't overclock too much as too the CPU temps still reach levels I am not comfortable with! Fans cranked to 80-90% 6700k CPU oc'd to 4.2ghz and temps reach low 70's (c). With fans on normal curve, the temps hit mid 80's(c) and I shut the pc down. Only use for minimal overclocking

bought this product to change my failing fan its great and easy to install

The fan never gets any louder than just above a whisper, and even with an AMD Ryzen 7 3700X, the CPU temps barely get above 60-65C. You may want to look into a bit beefier of a cooler if you have much above a Ryzen 7, but for what we have this works perfectly.

I bought it as a replacement for another brand cooler that was a total dud, and the manufacturer expected me to send it in and leave my computer nonfunctional for a week or more while they send me a new one. Learn from this Corsair: Offer Cross-ship. The cooler has worked splendidly since I installed it, although I'm a fan of Arctic Silver 5 compound so I scraped off the stuff that came on the heatsink, cleaned and re-tinned it. The cooler is efficient and keeps my 6700K at 64C or less under full load, gaming at about 50C. It does NOT have any fancy lights or whatnot, so if you're looking for bling, it ain't here. I'm a grizzled old gamer and frankly don't care if my machine has lights, I just want it to work well. The one down side to this unit is that the fan noise is awful. It sounds like a huge hive of angry hornets when at high RPM. So much so it gave me a tension headache and I ended up replacing the fan with a Noctua NPF-12-1700 fan, which has about one-third the noise, and better CFM.

I used this cooler up until I got my i9-12900K and it couldn't keep up with that chip. Worked great on my i7's, was quiet and generally you forget it's in there doing its job which is a good thing. Easy to install.

Had a simple build in a small case, wanted low noise, and not a giant heat-sink. I've been very satisfied with this cooler. I went by all the positive reviews and i have to say i agree. Easy to install and it's quiet!!...big plus.

Low temps, easy install. Just FYI if you have a NZXT S340 Elite case it’ll not fit properly with the Front USB header in the way. Had to get creative and install the fans on the front of the radiator instead of the back. Not the fault of this product, why I give it 5 stars still.

Never thought about using this type of cooling system, but for a gaming PC it was worth trying. Very easy to install. The fan provides some pretty good output into the radiator. I could feel how the CPU was being kept cool.

A pretty good working water cooler for your CPU if you are in need of better cooling rather than a typical contact fan. pricey for being a single fan but worth it being how well it performs.

This is a great replacement for anyone that bought an Alienware Aurora R9 with fan cooled CPU. I was maxing temps during games at 85 and up to 90. Plus it was very loud and annoying. Now I am between 50 and 60, maybe a tad more at times, while gaming. I idle at around 30 to 35. Also it fits very snug up top. BEWARE of the tubing before closing your PSU in. I could see how it would be easy to mash the RAD tubing against the RAM. With all that being said I wouldnt even try to read the steps to install that Corsair provided. It was very misleading. Plus it doesnt even mention the LA 1151 motherboard piece requirements from the hardware that it came with. I had the pump down on the CPU, pre thermal paste nice and even and realized the instructions had me using the wrong hardware. Other than the lack of information Corsair has a nice product here. Game on!

I have the AMD Athlon 2 X4 635 quad core cpu overclocked at 3.5ghz and i have this liquidcooling aio on it and before, it would reach high temps of 70-90*C and now it never goes above 52*C for only $69.99 its the best option you can go with unless you have a bigger budget