Arcam - SA20 300W Class G 2.0-Ch. Integrated Amplifier - Gray
- Key Specs
- Continuous Watts x Channel @ Ohms: 90W x 2 x 8 ohms; 150W x 2 x 4 ohms
- Number of Channels: 2.0 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Audio Only Inputs: 1 x Phono, 1 x Optical digital audio, 1 x Coaxial digital audio
- Preamp Outputs: true
- General
- Brand: Arcam
- Model Number: SA20
- Product Name: SA20 300W Class G 2.0-Ch. Integrated Amplifier
- Color: Gray
- Audio
- Continuous Watts x Channel @ Ohms: 90W x 2 x 8 ohms; 150W x 2 x 4 ohms
- Total Power Handling: 300 watts (How much amplifier (amplified) power (wattage) that can be handled before damaging the product.)
- Number of Channels: 2.0 (The number of discrete channels of sound output. This can be a single number or multiple numbers separated by decimal(s). The first number is the primary, horizontally directed audio channels. The number after the first decimal, if applicable, is the number of subwoofer outputs or channels. The number after the second decimal, if applicable, is the number of height or atmospheric channels designed to immerse the listener by producing overhead sound effects.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Total Harmonic Distortion: 0.003 percent (Measurement of the harmonic sound distortion. The lower the percentage, the cleaner the sound.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Amplifier Class: G (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
- Amplifier Type: Integrated amplifiers
- Signal-to-Noise Ratio (SNR): 106 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
- Inputs
- Audio Only Inputs: 1 x Phono, 1 x Optical digital audio, 1 x Coaxial digital audio
- Speaker-Level Inputs: true (Also referred to as high-level inputs. Enables the amplifier to receive a sound signal from another device that does not have RCA, or low-level, inputs.)
- Line-Level Inputs: true (Also referred to as low-level inputs. Enables the amplifier to receive a sound signal from another device via RCA cables.)
- Outputs
- Preamp Outputs: true
- Features
- Bridgeable: true (Bridging an amplifier increases the power it supplies to the speaker(s).)
- Dimensions
- Product Height: 3.43 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 17 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 12.7 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 20.3 pounds (The out of box weight of the item.)
- Other
- UPC: 050036360388
Immerse yourself with booming audio using this Arcam SA20 Class G integrated amplifier. The ultra-low distortion lets sound flow cleanly, while the high-quality components provide the durability needed to last years of regular use. This Arcam SA20 Class G integrated amplifier runs 90W of power through each channel for rich audio.
- Up to 300W total power: Power rating of 90W x 2 at 8 ohms, 150W x 2 at 4 ohms, two channels driven for robust audio.
- 4- or 8-ohm impedance: Efficiently conducts power.
- 106dB signal-to-noise ratio: Offers crisp audio.
- Built-in 32-bit DAC: Ensures the full aural picture of whatever the artist intended.
- 0.003% total harmonic distortion and noise: Delivers clear audio.
- Automatic standby: Can be configured up to four hours, in half-hour steps of inactivity, to minimize power consumption.
- Network connection: You can easily control and monitor it remotely.
- Up to 300W total power: Power rating of 90W x 2 at 8 ohms, 150W x 2 at 4 ohms, two channels driven for robust audio.
- 4- or 8-ohm impedance: Efficiently conducts power.
- 106dB signal-to-noise ratio: Offers crisp audio.
- Built-in 32-bit DAC: Ensures the full aural picture of whatever the artist intended.
- 0.003% total harmonic distortion and noise: Delivers clear audio.
- Automatic standby: Can be configured up to four hours, in half-hour steps of inactivity, to minimize power consumption.
- Network connection: You can easily control and monitor it remotely.
Whats Included
- SA20 300W Class G 2.0-Ch. Integrated Amplifier
- Remote with batteries
- Mains Lead
- Owner's Manual
- SA20 300W Class G 2.0-Ch. Integrated Amplifier
- Remote with batteries
- Mains Lead
- Owner's Manual
Product Manuals
Q: How can I hook up my Arcam SA20 so that I can play music (e.g., Spotify) from my iPhone?
A: Use an iPhone DAC cable which has a lightning interface on one end and a 3.5mm jack on the other. Then get a 3.5mm to RCA adapter. With these adapters you can plug your iPhone into the regular RCAs on the back. Alternately, you can buy a Bluetooth adapter that plugs into the RCA jacks in the back and connect via Bluetooth. Hope this helps.
Q: Is this a class A/B or class D amp?
A: CLASS G
Q: How do I hook up a subwoofer to a Arcam SA20 Thanks
A: Just connect it to the Oreo it’s on the Arcam and sub inputs. Adjust crossover to desired setting and volume to blend well within your listening setup.
A: This does not stream by itself. Use any streamer like a Wiim Et
A: Yes it will have. Connect it to the pre outs on the Arcam. But question is why do you want an AVR and this integrated stereo amp?
Q: Can you connect this to an avr so my avr being the source .
A: Yes, there is a mode in which you can assign one of the inputs as a direct pass through mode making this just a stand alone amp.
