Techtober SaleEnds Sunday. Limited quantities. No rainchecks.Shop now

Skip to contentGo to Product Search
Main Content

Cable Leader - Cat 5e Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Blue

Model: C5102-XXXX
SKU: 13136904

Reviews coming soon

Sold & shipped by

About this product

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 5e Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 1 ft to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.

Features

  • Non-Booted Cat 5e, 24 AWG Bare Copper

    Four twisted pairs of 24 AWG bare copper, not copper-clad aluminum, rated to 350 MHz against the 100 MHz the Cat 5e standard requires. Carries Gigabit Ethernet to 100 m with 50-micron gold-plated RJ45 contacts on both ends.

  • No Boot Means Tighter Spacing in Dense Patch Panels

    Without a molded boot the plug body is only as wide as the RJ45 itself, so neighbouring cables seat without crowding each other on a 24- or 48-port switch or patch panel. Less plastic at the port also leaves more room for airflow through a packed rack.

  • Works with Any RJ45 Port, Not for Frequent Unplugging

    Works with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP switches, routers and NAS units. Quick check: Patch panel to switch - Yes. Rack or cabinet wiring - Yes. Cables unplugged daily - No, choose a snagless cable. Plenum or riser run - No. Outdoor - No.

  • Low-Profile Plugs for Set-and-Forget Rack Wiring

    A non-booted plug leaves the latch exposed, which is the trade-off for a smaller footprint. That suits permanent patching inside racks and cabinets, where cables are plugged in once and left in place, rather than desks where cords are moved and pulled often.

  • Sample-Tested Production, Cable Leader Direct Support

    Each cable is sample-tested during production for continuity and wire map. Manufactured to RoHS environmental standards. If your cable arrives defective or stops working in normal use, Cable Leader handles replacement requests directly, no manufacturer redirects.

Specifications

  • Cable Length
    15 feet
    Networking Cable Type
    Cat 5e
    Connector Type (End 1)
    RJ45
    Gender (End 1)
    Male
    Connector Type (End 2)
    RJ45
    Gender (End 2)
    Male
Sponsored

Reviews

This product doesn't have any reviews yet.

Compare similar products

Cable Leader - Cat 5e Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Blue
Cable Leader - Cat 5e Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Blue

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 5e Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 1 ft to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.

Cable Leader - Cat 5e Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Orange

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 5e Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 1 ft to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.

Cable Leader - Cat 5e Ethernet Cable, Shielded STP Patch Cord, RJ45 24 AWG, for Router, Switch, Patch Panel & Server Rack - Gray

This Cat 5e shielded Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, moves Gigabit traffic over 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires. Foil shielding wraps the twisted pairs, so the run stays clean beside power cabling, inside metal racks and near motors or ballasts where unshielded cords pick up noise. Snagless molded boots protect the locking tab and 50-micron gold-plated RJ45 contacts hold a clean connection. Compatible with Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP hardware, and fits Cat 6 and Cat6a ports. Stocked in 7 ft to 100 ft lengths, from short patch cables to long Ethernet cables between rooms. Best for: structured wiring, workshops, server rooms and electrically noisy rooms. Not for: in-wall runs, outdoors, or 10 Gbps links (choose Cat 6a).

Cable Leader - Cat 5e Ethernet Cable, Non-Booted 24 AWG RJ45 Patch, Gigabit for Patch Panel, Switch, Server Rack, Router - Gray

Wiring a crowded patch panel or switch where every millimetre counts? This Cable Leader non-booted Cat 5e Ethernet patch cable, also sold as a Cat5e LAN cable, internet cable or RJ45 network cord, drops the bulky boot so plugs sit side by side in high-density ports and air moves freely through the rack. It uses four twisted pairs of 24 AWG bare copper rated to 350 MHz, well above the 100 MHz the Cat 5e standard requires, with 50-micron gold-plated RJ45 contacts. Compatible with any RJ45 port on Cisco, Netgear, TP-Link, Ubiquiti, Linksys, ASUS, Synology and QNAP gear. Carries high speed Gigabit Ethernet up to 100 m and fits any Cat 5e, Cat 6 or Cat 6a jack, Cat6 and Cat6a patch panels alike. Stocked in 1 ft to 100 ft lengths, including 3, 10, 25 and 50 ft, from short patch cables to long Ethernet cables between rooms. Best for: patch panels, network switches, server racks and structured cabling. Not for: cables unplugged often (no latch protection), plenum or riser runs, or outdoor use.

Specs

Be the first to ask a question.

We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.

No content
Sponsored