Cable Leader - NEMA 6-15P to IEC C13 Power Cord, Heavy Duty 14 AWG 15A 250V for 208V/240V Server, UPS, PDU, Workstation - Black
About this product
Need to power a server, UPS, or high-wattage workstation from a 208V or 240V circuit with a NEMA 6-15R or 6-20R outlet, but the equipment only shipped with a standard 120V cord? This Cable Leader NEMA 6-15P to IEC C13 power cord connects any device with a C14 inlet directly to a 240V receptacle, rated 15A 250V so a full-load rack server runs on one cord with no adapter. Built with 14 AWG three-conductor copper wire, a 105C SJT jacket, and fully molded plugs with strain relief at both ends for rack installations and under-desk cable runs. Compatible with any device using an IEC C14 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C14 input, network switches, storage arrays, and 240V workstations; it does not fit standard 120V NEMA 5-15R wall outlets, C20 inlets, or twist-lock L6 receptacles. UL Listed, RoHS and REACH compliant. Best for: 208V/240V rack and workstation power from a 6-15R or 6-20R outlet. Not for: 120V household outlets, C19/C20 equipment, or loads above 15A.
Cable Length
10'Features
Power 208V/240V Equipment from a 6-15R or 6-20R Outlet
Replace the 120V cord that came in the box with one made for the 240V circuit your equipment actually runs on. Plugs into a NEMA 6-15R or 6-20R receptacle at one end and any IEC C14 inlet at the other: rack servers on a 208V branch circuit, a UPS or PDU fed from a 240 volt drop, or a high-wattage workstation on a dedicated 240V outlet. Rated 15A 250V.
15A 250V, 14 AWG Copper - Rated for Full-Load Rack Duty
A thin 18 AWG cord run at 15A on a 240V circuit heats up and drops voltage under sustained load; this cord uses 14 AWG three-conductor copper sized for the full 15A rating with margin to spare. The NEMA 6-15P plug (NEMA 6-15 series) is the standard 250V configuration for 15 amp branch circuits, and the IEC C13 end meets the IEC 60320 spec for C14 inlets. 105C SJT jacket, UL Listed, RoHS and REACH compliant.
C14 Inlet Compatibility - Not for 120V Wall Outlets
Works with any device that has an IEC C14 power inlet, accepts 208V to 240V input, and draws 15A or less: servers, UPS units, rack PDUs, network switches, storage arrays, 240V workstations. Quick check: Outlet is NEMA 6-15R or 6-20R - Yes; Device inlet is C14 (3-pin, fits C13) - Yes; Standard 120V 3-prong wall outlet (5-15R) - No; Device inlet is C20 or draws over 15A - No. For 120V outlets, use a NEMA 5-15P to C13 cord.
Heavy-Duty 14 AWG SJT - Built for Racks and Workstations
Three 14 gauge (14 AWG) copper conductors inside a 105C-rated SJT jacket that stays flexible enough to route through rack rails and cable managers without kinking. Both the 6-15P plug and the C13 connector are fully molded with integrated strain relief, so the cord survives repeated seating in a C14 inlet and being pulled through under-desk runs. Black jacket blends into rack and office wiring.
Sample-Tested Production - Cable Leader Direct Support
Each cord is sample-tested during production for electrical continuity. Manufactured to RoHS environmental standards (lead, mercury, and cadmium-free). If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly - no manufacturer redirects.
Specifications
- Cable Length10 feetConnector Type (End 1)NEMA 6-15Gender (End 1)MaleConnector Type (End 2)IEC/EN 60320 (IEC 320)Gender (End 2)FemaleIn-Wall RatedNo
Reviews
Rating 5 out of 5 stars with 1 review
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products

Need to power a server, UPS, or high-wattage workstation from a 208V or 240V circuit with a NEMA 6-15R or 6-20R outlet, but the equipment only shipped with a standard 120V cord? This Cable Leader NEMA 6-15P to IEC C13 power cord connects any device with a C14 inlet directly to a 240V receptacle, rated 15A 250V so a full-load rack server runs on one cord with no adapter. Built with 14 AWG three-conductor copper wire, a 105C SJT jacket, and fully molded plugs with strain relief at both ends for rack installations and under-desk cable runs. Compatible with any device using an IEC C14 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C14 input, network switches, storage arrays, and 240V workstations; it does not fit standard 120V NEMA 5-15R wall outlets, C20 inlets, or twist-lock L6 receptacles. UL Listed, RoHS and REACH compliant. Best for: 208V/240V rack and workstation power from a 6-15R or 6-20R outlet. Not for: 120V household outlets, C19/C20 equipment, or loads above 15A.

Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.

Need to run a server, UPS, or rack PDU with an IEC C20 inlet from a 208V or 240V circuit with a NEMA 6-20 outlet? This Cable Leader NEMA 6-20P to IEC C19 power cord plugs into a 20 amp 6-20R receptacle and carries the full 20A 250V rating end to end, because the 6-20P plug, the 12 AWG conductors, and the C19 connector are all rated for 20 amps. Built with 12 gauge three-conductor cable in a black SJT jacket, with fully molded plugs and strain relief at both ends. Compatible with any device using an IEC C20 inlet on a 208V, 220V, or 240V supply, including servers, UPS units, rack PDUs with C20 input, high-power network switches, and ASIC miners; for loads that run around the clock, keep continuous draw at 16A or less. UL Listed and RoHS compliant. Best for: 208V/240V data center, server rack, and equipment power from a NEMA 6-20R outlet. Not for: 120V household outlets, NEMA 6-15R outlets, twist-lock L6-20 receptacles, or devices with a C14 inlet.

Your network switch or server has a notched C16 inlet a standard C13 cord will not fit, and the rack's only 250V receptacle is a round twist-lock. This heavy-duty power cord connects a NEMA L6-20P twist-lock plug to an IEC 60320 C15 connector, delivering 15A at 250V for a 3,750-watt maximum load over three 14 AWG copper conductors. A clockwise twist locks the plug into an L6-20R receptacle, so vibration or a cable pull cannot drop power. C15 is the IEC 60320 hot-condition connector, the SJT jacket is rated to 105°C, and both ends are fully molded with integrated strain relief. Compatible with any 250V-capable equipment with an IEC C16 or C14 inlet: network switches, routers, rack servers, UPS systems, and PDUs. The plug needs an L6-20R receptacle, will not fit a standard 125V outlet, and is not interchangeable with the 125V L5-20P. Best for: 208V and 240V equipment with a C16 or C14 inlet on an L6-20R receptacle. Not for: 120V devices, C20 inlets, or loads above 15A. UL Listed and RoHS compliant.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.





































