Compustar - iDataStart T-Harness for Select Honda and Acura Vehicles - Black

This Maestro ADS-MRR radio replacement and steering wheel interface allows you to control an aftermarket radio from the steering wheel of your compatible vehicle with programmable buttons that you can assign functions to from the Internet.

This Vantrue hardwire kit provides seamless, continuous power for your dash cam and other devices, supporting a wide range of 12–24V vehicles including cars, trucks, SUVs, buses, and big rigs. Designed for convenience and protection, it enables 24/7 parking surveillance by connecting directly to the vehicle battery, ensuring constant monitoring even when parked. For everyday use, it can be wired to the ignition, powering the dash cam on and off automatically with the engine so you never have to worry about plugging in chargers. Built-in smart low voltage protection safeguards your car battery by shutting off power when voltage drops to 11.6V or 23.2V. The Type-C USB plug adds versatility, making it compatible with Type-C dash cams, GPS navigators, and radar detectors, while freeing up the cigarette lighter for other devices. Please note: this hardwire kit is designed specifically for Vantrue dash cams and is not compatible with other brands.

Add an amplifier to nearly any radio with the KISLOC2 Stereo Line-Out Converter. Experience true sonic accuracy at any volume level with all the sparkling highs and thunderous lows of your original audio. KISLOC2 Stereo Line-Output Converter Unlike traditional LOCs the KISLOC2 is designed without inductors to deliver a completely flat frequency response at all volume levels. Using nothing more than your factory speaker wires the innovative KISLOC2 automatically converts the speaker signal into both an RCA signal and a powerful 100 milli-amp 12-volt remote wire using DC offset. Powerful enough to turn on multiple amplifiers the 12-volt remote wire delivers plenty of power without hunting for a switched 12-volt power source. Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on *Amplifier output of smart radio must have 60 impedance or lower. What's in the Box 46KISLOC2 line output converter Owner's manual Specifications Accepts up to 55 watts (16 volts) of input signal Fully compatible with standard radios and most smart radios* Delivers up to an 8-volt output signal Flat 20Hz-20kHz frequency range at all volume levels Includes a powerful 100 milli-amp remote turn-on wire. No 12V power source needed! LED indicator for DC offset turn-on