Customer Ratings & Reviews

This is my first 3D printer and I love it so far. It does have a couple of minor drawbacks which were fixed by simply printing parts for it. The top lid will get pushed to the side with some prints unless you push it all the way down enough for the magnets to catch it. If it's pressed in all the way, then the filament tube will rub against the top of the plastic and scratch it. The fix is to either not use the lid at all or print out a vented riser like I did. Also paired it with a filament dryer and some PLA and PETG filament. Everything has been printing great and looks good too. I would consider this a nearly perfect begineer/intermediate printer. It even has a multicolor upgrade kit you can buy later on.

Man, i cant stress this enough, this printer out the box is amazing and can print carbon fiber nylon. Im not new to Creality but i am new to the k series self leveling, at first i thought it be something lile my ender 5 s1 i was wrong this printer doesn’t have the adjustable knobs on the bed which raised my worries, at fursh the printer wasnt leveld correctly but i did see yoj can adjust the z offset throughh the interface which i tried and i guess it worked or the AI adjusted itself after three failed prints, now before you stop reading i stress tested it the first three prints which failed but some how this thing recognizes the errors and man this thing doesn’t mess up the hard prints i did inn the beginning i of course ran them again and wow jusg flawless no errors no under extrusion, no gaps no wobble, no nothing, also in the beginning i recall it was just the support thats messed uo my first three prints so now that i am thinking about it i think it was a slicer problem. Not the printer. Anywho I recommend this beast of a machine to anyone starting or looking for another printer, keep in mind im coming from the ender 5s1 which is less technological and more manual z offset, so yes i give five stars and yes you should consider buying this one from all the other k series, even the enders, this think is what creality had to make years back, im glad they did eventually, better late than never right. Oh and also I recommend gettimg the filament dry pi, thing can revive any messed up filament.

I’m really impressed with the quality of this printer. I make parts in software and print them a few hours later, it’s like having a desktop manufacturing machine! The parts are strong and accurate, I feel really confident with the quality and durability of the prints and the KC1 supports many different filaments. The A.I camera is awesome, and yes you’ll have remote monitoring of your prints over LAN/WiFi. This was a wise choice for my needs, super easy to use and reliable.

New to 3D printing and I was a little scared after all my research. I finally bought this printer main because it was on sale. Setup was very simple you do have to watch the warnings my printer was set for the wrong voltage. I caught that in time after reading the instructions and watching the video. After the setup of the machine and account I have not gone a day without printing something for myself or others. I am so impressed I have had a few bumps but nothing compared to problems others have posted on reviews or forums. Definitely going to buy more printers.

Easiest setup and prints I've ever experienced. The auto leveling feature is incredible and saves so much time. Works seamlessly with different slicers and filaments, super friendly user interface. 10/10 would recommend

This thing has so many issues I don't know where to start. Creality likes to send out videos and tell you to fix it yourself... First problem is the extruder gears stripped out. AI absolutely does not work as it should. Had the entire print chamber filled with extruded filament. Other times, AI canceled perfectly good prints. Now I get "nozzle is not heating as expected" almost every time on the first layer. Machine locks up and must be power cycled. Prints have started failing more and more. I'm about to throw this in a dumpster and get a Bambu.

Very good beginner printer. As long as you learn the basics it is capable of doing most anything you will need. I recommend getting the space pi filament drier as well to make the perfect combo

Really amazing printer with a lot of cool features and potential once you get the basics down. Lots of awesome prints available through the Creality cloud app as well

The 3d printer arrived yesterday, not even 3 prints in, it got clogged using the officially recomended filament, did basic cleaning, and you pay for the ai camera to do its job and to stop the print well guess what, it doesnt work, i comr home to it printing on the air with jothing coming out, nothing, went on youtube and it requires you to disassemble half the extruder just to clear a clog out which is ridiculous, would not recommend getting, this is the second machinr from creality and got nothing but problems from both, save yourself the hedache and go with a more reputable brand

I bought this for my 14 year old son. He was able to get it up and running quickly and has already made lots of cool stuff! He was also able to run it directly from his cell phone for some designs. It runs pretty quietly and no problems with it so far. Very happy with the purchase!

This printer is an absolute work horse. The large build plate is perfect for every project. I was new to 3D printing but the Creality is so easy to use. It’s almost self explanatory.

Excellent printing right out of the box! Delivery was spot on as well. It prints Carbon fiber filament which is the reason I bought it. It's supposed to be a big improvement over the Creality K1.

Worked well right out of the box! Great 3D printer with easy access and instruction...Having a good time with this one!

The most fun I have had in a long time. I have been printing almost nonstop since I purchased the printer. Once I recived the printer I was up and printing within 15 minutes without reading the instructions. If you read the instructions I have read that people are up in 5 minutes. After finding several sites that have .stl files has increased the amount of fun that I have had. In addition to printing, I have been experimenting with different filament types.

So much fun and fairly easy to use. Took about 30 minutes to set it all up and run my 1st print. Now I’ve been using it for 3 months and no complaints.

I'm new to 3D printing, but this printer has really made it an easy-to-learn first step into the hobby.

My first 3D printer and it was worth it, first of all i can pri t many things, second it was fast, third, it wasn't a bad price.

Loving it so far, the difference from a ender 3v2 is huge. Fast, reliable and great printing quality.

Works well for everything I’ve printed so far. It worked right out of the box. Minor tweaks needed for different filaments. Like any 3dp it’s going to be a learning curve

We took a little bit to set it up and re route the plastic tube because it kept breaking but then it was so smooth and easy,we love it it does so much always learning more it can do