
This GE Profile Series PEM31DFWW mid-size microwave utilizes sensor cook options, including options for cooking popcorn, vegetables and potatoes, reheating items and preparing beverages, for simple use. Weight and time defrost help facilitate thawing.
A: *** UPDATE *** This is what the install looks like using the trim kit for the GE JE1860SB and the LG LMC2075ST microwave. Overall the fit is good. The one slight imperfection is that the LG microwave sticks out about 1/2" farther that the GE unit did, and hence is no longer perfectly flush. This could perhaps be remedied if was willing to modify the trim kit but this solution was good enough for me. As mentioned in a previous post, I did have to shim the left side (between the microwave and the trim kit stand) about 1/4".
A: Looking to replace the GE Profile microwave model PEM31SM3SS - what is other brands/models or GE equivalent do you recommend - I would like to reuse the trim that is already there
Q: I need to replace GE Spacemaker XL1400, will the XL1600 fit into the space?
A: Hi Charlie- We certainly appreciate your loyalty! Yes, all 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Check out our GE® 1.7 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM6175SKSS. View Quick Specs for dimensions: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM6175SK_EK_C3.pdf - Keep in touch! SUE@GEA
A: We just replaced a GE Profile JEM31 with a GE Profile PEM31. The installer didn't think it would fit and just left the unit and trim kit w/ us and said 'good luck'. However, in our case the replacement unit and trim kit fits the cabinet nicely. We used the new hardware to create rails for the PEM31 and attached the rail guides to the microwave. Easy. The chrome-looking high-quality plastic trim front actually gets screwed into the wood cabinetry around the opening for the microwave. In other words the new unit sticks out further than the JEM31 did but in our case that's also no problem. I've never installed a microwave before but this just took a few minutes. Screws were included and the directions were clear. Attaching are photos of the finished product. Good luck!
A: Yes it is still manufactured and you can buy it at Best Buy.
A: Hi DB25- The latest model is GE Profile™ Series 1.1 Cu. Ft. Countertop Microwave Oven PEM31SFSS. It is compatible with GE® Optional 27" Built-In Trim Kit JX827SFSS and Optional 30" Built-In Trim Kit JX830SFSS. We suggest to view the Quick Specs for details including cutout dimensions: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEM31SF_EF_BM_FM_R2_17.pdf - Trim Kits are not interchangeable. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. Thanks for being part of our GE Appliances Family! SUE@GEA
A: Hi Tony- The replacement model is GE Profile™ Series 1.1 Cu. Ft. Countertop Microwave Oven PEM31DFBB. It is compatible with GE® Optional 27" Built-In Trim Kit JX827DFBB and Optional 30" Built-In Trim Kit JX830DFBB. We suggest to view the Quick Specs at the following link for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEM31DF_r2.pdf - Thanks for your loyalty! SUE@GEA
A: It will need some modification. Mine worked after some cutting and grinding. Looks just fine.