Take total control over your car audio system’s frequency management with the Hifonics HFXR 2/3-Channel Active Crossover, a versatile processor built for serious setups. Whether you’re driving a car, truck, or building a custom vehicle stereo system, this unit lets you separate and shape audio with precision across front, rear, and subwoofer channels. With the ability to switch between 2-channel or 4-channel input operation, the HFXR adapts to mono sub setups or full stereo configurations for maximum flexibility.At its heart is an 8.5-volt line driver preamp output that delivers a strong, clean signal to your amplifiers, reducing noise and maintaining clarity even at higher volumes. A dedicated pre-amp direct sub in and sub-out path means your bass channel gets a signal optimized separately for low-end control. You also get a remote bass level knob, so you can tweak the bass output from the driver’s seat, and a 45 Hz bass boost via a quasi-parametric EQ for deep tunable lows.Front and rear high-pass filters use 2nd-order Butterworth topology, letting you set the cut-off frequencies for front and rear channels so your speakers only see the frequencies they are designed for. A 180-degree phase-shift switch helps align your subwoofer with the rest of your system to ensure coherent bass. Level adjustments for front, rear and sub channels provide granular control over each output. RCA pre-amp outputs allow cascading to additional components if your build evolves.With a full frequency response from approximately 10 Hz to 30 kHz, channel separation higher than 60 dB, signal-to-noise ratio better than 95 dB, and total harmonic distortion below 0.01%, it is engineered for clean signal processing. The Hifonics HFXR 2/3-Channel Active Crossover gives your audio system the precision it needs, from subtle tweaks to full system equalization, and ensures your front, rear and sub outputs are working in harmony for high-quality sound.

Take total control over your car audio system’s frequency management with the Hifonics HFXR 2/3-Channel Active Crossover, a versatile processor built for serious setups. Whether you’re driving a car, truck, or building a custom vehicle stereo system, this unit lets you separate and shape audio with precision across front, rear, and subwoofer channels. With the ability to switch between 2-channel or 4-channel input operation, the HFXR adapts to mono sub setups or full stereo configurations for maximum flexibility.At its heart is an 8.5-volt line driver preamp output that delivers a strong, clean signal to your amplifiers, reducing noise and maintaining clarity even at higher volumes. A dedicated pre-amp direct sub in and sub-out path means your bass channel gets a signal optimized separately for low-end control. You also get a remote bass level knob, so you can tweak the bass output from the driver’s seat, and a 45 Hz bass boost via a quasi-parametric EQ for deep tunable lows.Front and rear high-pass filters use 2nd-order Butterworth topology, letting you set the cut-off frequencies for front and rear channels so your speakers only see the frequencies they are designed for. A 180-degree phase-shift switch helps align your subwoofer with the rest of your system to ensure coherent bass. Level adjustments for front, rear and sub channels provide granular control over each output. RCA pre-amp outputs allow cascading to additional components if your build evolves.With a full frequency response from approximately 10 Hz to 30 kHz, channel separation higher than 60 dB, signal-to-noise ratio better than 95 dB, and total harmonic distortion below 0.01%, it is engineered for clean signal processing. The Hifonics HFXR 2/3-Channel Active Crossover gives your audio system the precision it needs, from subtle tweaks to full system equalization, and ensures your front, rear and sub outputs are working in harmony for high-quality sound.

Newly redesigned and Hi-Res Audio Certified to reproduce up to 40kHz frequency response, the Next-Generation S-Series S2-S65C 6.5” 2-way Component Speakers offer a new standard in entry-level sound performance. This new benchmark in sound quality elevates the Next-Gen S-Series speakers, resulting in a more accurate and natural sound at an entry-level price point.

Upgrade your 2-way component speakers into 3-way components with a PNW Series 3-way passive crossover network for select AudioControl speakers. The PNW-XN3 is compatible with PNW-65CS2, PNW-69CS2, and PNW-275 component speakers and is configurable from 2, 4, or 6 channels of input. This crossover network also features a 2nd order Linkwitz-Riley crossover with high pass, bandpass, and low pass filtering to ensure the best sound from your speakers.

PowerBass OE65C-FD OEM Replacement 6.5" Component Speaker System Ford / Lincoln - Pair PowerBass OEM Speakers are available in two different styles, The coaxials feature an Injection molded PP cone with a 1” silk dome tweeter, while the component system features an inverted molded woofer cone with a separate 1” silk dome tweeter to deliver the music experience you have always wanted from your factory sound system. With the PowerBass OE Series there is no need to drill holes, or cut wires thanks to our simple plug and play design that matches the factory bolt locations and plug styles for one of the fastest upgrades ever! Features - • 6.5" Upgraded OEM Replacement Component Speakers • 60 Watts RMS/120 Watts Max • Injection Molded PP Cone • Nylon OEM Speaker Adapter • 1” Silk Dome Tweeter • 10 oz. Magnet • Factory Plug and Play Wiring Adapters • 4-ohm System Impedance APPLICATIONS - Some vehicles are equipped with OEM component system please use the OE65C-FD for these applications FORD - • 2019 Ranger Front Location • 2015-UP F-150 Rear Location • 2018-UP F-250 Rear Location • 2018-UP F-350 Rear Location • 2018-UP EXPEDITION Rear Location • 2011-UP EXPLORER Rear Location • 2011-UP EDGE • 2012-UP FOCUS • 2013-UP FUSION • 2010-UP MUSTANG • 2011-UP FIESTA • 2011-UP FLEX • 2015-UP TRANSIT CONNECT • 2013-UP ESCAPE • 2013-UP C-MAX LINCOLN - • 2016-UP MKX • 2018-UP NAVIGATOR Rear Location Speakers may fit in newer make applications other than those listed above Specifications - • Nominal Impedance: 4-ohm • Voice Coil Size: 1.0 in • Material: PP cone woofer & silk dome tweeter • Magnet Size: 10 oz • Sensitivity (1W / 1M): 88 dB • Dimensions (in Inches): 6.5 in • Mounting Depth: 1.6 in • Size: 6.5 in • Sensitivity: 88 dB • • Frequency Response: 70 Hz - 20 kHz • Power Handling (RMS/Peak): 60 watts RMS/120 watts peak
| Pros for Hifonics - HFXR 2/4 Ch 2/3 Way Active Crossover w/Bass Remote 8.5 Volt Line Driver - Black | |||
|---|---|---|---|
| There were no pros for this product— | Sound Quality, Ease of Installation, Value | There were no pros for this product— | There were no pros for this product— |
| Cons for Hifonics - HFXR 2/4 Ch 2/3 Way Active Crossover w/Bass Remote 8.5 Volt Line Driver - Black | |||
| There were no cons for this product— | Mid Bass, Tweeters | There were no cons for this product— | There were no cons for this product— |
This product doesn't have any reviews yet.