Customer Ratings & Reviews

Great case, very sturdy and tons of room. This is my most fun build ever with its unique design, can't wait to get the liquid cooled 4090 in there to finish the look and some Star Wars flair in it. However, in all of its glory (this really is the best case I've ever worked with) I have to knock one star off because the GPU did not seat fully when installed properly as the case is designed. I had read about this so i tested with a cheap 3060 just in case, and sure enough the PC fired up, i was able to set up BIOS and update firmware, but on restart the screen started to flicker just as i was selecting boot drive to install windows... i shined a flashlight under the card and sure enough it had backed out since initial install when i seated it fully. This case is not for the faint of heart as you see in my photo, you have to hack up the back pretty good to get proper function. On top of this, i was able to plug in the top display port barely but the ports are blocked as well! So that whole bar needs to be trimmed as well, later as i don't have my dremel with me.. But great job HYTE on literally EVERYTHING else about this case, great cable management and LC radiator support and install, tons of room to get your hands where you need them.

I originally bought this case to be able to fit my rtx 4070ti, since my old case wasnt big enough (Corsair 4000x). What I did not expect was how MUCH room there was in the case. I really liked the layout in the back of the case with plenty of room for cables. And the frot angled panel design is definitely something fresh and modern. This case definitely adds asthetic to my setup. But my most favorite part is the vertical GPU mounting feature. A bit on the expensive side but still worth it, if this is what you're looking for!

Plenty of air flow and fan options. It does get a little tight on top with the radiator fans for cable management, be sure to pre-install your motherboard connections before placing the top radiator and fans, routing the cables can get very tight. Overall, plenty of space for cable management on the back side of case. Easy to open side panels and top, solid build quality. The top and bottom have filters. Came with two fans on the bottom and one rear 120mm fan. Huge ventilation vents on rear panel, top and bottom, so I have no issues keeping things cool. Case: HYTE Y60 Motherboard: Asus ROG Strix Z790-E CPU: Intel i9 13th Gen 24-Core 3GHz Memory: G Skill Trident Z DDR5 32GB RAM GPU: Asus ROG RTX 4070 Ti 12GB SSD: Samsung 980 Pro Gen4 1 TB Power Supply: Seasonic Vertex GX-1000 Watts OS: Windows 11 Home 64-bit Peripherals: Mouse: Glorious Model-O Keyboard: Glorious GMMK compact mechanical w/ Lynx switches Display: 27" Gigabyte 1ms curved 144Hz Headphones: Logitech G435 Case: HYTE Y60 Motherboard: Asus ROG Strix Z790-E CPU: Intel i9 13th Gen 24-Core 3GHz Memory: G Skill Trident Z DDR5 32GB RAM ːsteamhappyː GPU: Asus ROG RTX 4070 Ti 12GB SSD: Samsung 980 Pro Gen4 1 TB Power Supply: Seasonic Vertex GX-1000 Watts OS: Windows 11 Home 64-bit Peripherals: Mouse: Glorious Model-O Keyboard: Glorious GMMK compact mechanical w/ Lynx switches Display: 27" Gigabyte 1ms curved 144Hz Headphones: Logitech G435

[Employee of bestbuy] Amazing pc case and has great features! Has tons of space for anything you could want to add. And I also enjoy the cable management spots in the back of the case. Also come with a vertical gpu mount? Oh yea

This case is just amazing. I always had problems byildimg pc cause of ther was no space in the tower for me to freely plug all the hardware in. This tower is out of this world. Thers alot of space and You can literly disarm everything, making it easy for you to connect all your hardware, do cable Management, amazing airflow. Etc.

This case was an absolute beauty when i saw it and im glad to comfirm how perfect it was for my build. Super easy access to any of the parts I added and still leaves plenty of room to upgrade things later. Also the large panels of glass leave so much to look at inside.

This y60 case is a fantastic case that has plenty of build room for power builders, new builders, or hobbyist. This case will easily fit a 4090 GPU, full atx mobo, has room for 360 water cooled cpu on top, a cool riser that allows the GPU to be vertical instead of horizontal like most cases, and has plenty of zip ties to do cable management. My Asus water cooled system keeps my cpu around 35 C in this case with a Ryzen 9 7000 series. Running this with an Asus mobo, 64 GB of G-skill ram, Asus 4070ti GPU, corsair 850RX PSU, 3 - 2TB samsung 980 SSD's, and Halo fans in the case. This is the y60 case with no screen or you can buy the y70 case with a screen in the corner that is touch screen. You can also buy a screen to put in this case if you would rather do it yourself. Really the only complaint I have about this case is the PSU room and wiring around the PSU is really tight. You are still able to get in and plug things in, but it is hard.

Stunning design and so much room for any ATX board. Large enough for a 3 fan gpu but personally a 2 fan looks better. It is a little on the expensive side but it is worth it i can assure you.

Amazing case big enough to fit my 3090 Asus. Great airflow as well! Looks beautiful. Easy to build in and amazing cable management help in there back perfect for zip ties.

I do think for the price this is a decent case with most good GPU riser cables costing at least $50 so you're basically getting a fishtank case for $100. It's quite a bit cheaper than the Y70 and I think if you're after the vertical GPU orientation then this is good but keep in mind that this is really meant for dual slot GPUs. I tried putting my triple slot asrock 7900xtx in here and it was getting temps up in the 90s at full load. The GPU has very little room for airflow as it's almost right up next to the glass, I wish their was some disclaimer of some sort that this is not meant for big 3 slot cards. I will have to use a dual slot card for hopefully better temps with my next build in it. So I'm docking a star for that and the fact that it's not completely white with the single black fan and gromets in black.

As the title says. Great case with lots of space that really shows off your build. Great build quality and really shows a lot of thought went into it's design. It is BIG for a mid tower case though so be aware of that!

Plenty of space for an water loop build or AIO build. case is expensive but you receive a GPU vertical mount with 3 fans.

Has great space for canle management. A very sleek case, but has a unique flare. Great for staging a theme in. Plenty of space for a funko if thats your think.

Many people end up going with the o11 dynamic series, which no deny, they have crazy pcs. However they are just way to common. But the hyte y60 is unique in its own ways. I custom build in it, with some solid specs that don’t usually get really hot, however the airflow in this case is emaculent. I’d totally recommend someone to get this case if they want to go for a fish tank or just unique pc look.

[Employee of bestbuy] Great case to show off your build in every angle and great airflow as well!

Love it! Plenty of space to build in the whole thing feels quality!

The case is fantastic. Plenty of room. 2 chambered case makes hiding cables easy. Plus I bought the LCD screen from Hyte, as well. Absolutely love it.

This is by far my favorite pc case ever !!! Functionality and cosmetically ! The staff at Best Buy made sure I got the one I wanted and was amazingly polite and understanding 10 out of 10!!!

Beast of a case. great quality and unique style that will showcase your build. Expensive but if you factor in the riser cable it works out pretty even for iis size and quality.

The HYTE Y-60 is a very nice case I have been enjoying it very much. I love my new build and so far everything has been just Great!