GAIA Neo: Elevating Audio IsolationThe GAIA Neo series is the next evolution in IsoAcoustics’ award-winning line of speaker isolation feet. Building on the proven legacy of the original GAIA models GAIA Neo introduces a series of advanced upgrades including seamless height adjustment improved isolation performance simplified installation and a sleek modern aesthetic in black or dark chrome.Designed to replace factory-installed feet or spikes the GAIA Neo decouples the speaker from the supporting surface to eliminate distortion caused by vibrations and reflections. With GAIA Neo unlocking the full potential of your audio system is easier than ever before.FeaturesEnhanced IsolationHeight AdjustmentSimplified InstallationFor Speakers Weighing Up to 70 lbs.Patented TechnologyThe GAIA Neo series builds on IsoAcoustics’ patented isolation technology with refinements that take performance even further. The GAIA Neo isolators offer increased isolation effectiveness reducing internal reflections and mechanical vibrations with greater precision.Proven PerformanceThe GAIA Neo isolator is directional and designed to be aligned with the speaker’s drivers helping to resist lateral movement and oscillations while maintaining accurate alignment with the listening position. By decoupling the speaker from its supporting surface GAIA Neo reveals greater clarity finer detail and a more transparent soundstage with enhanced depth and realism.Stable Contact on Uneven FloorsFloors are often not perfectly level and traditional rigid feet can struggle to sit flat. The GAIA Neo uses a bottom isolator that can pivot to maintain full contact with the floor even when the surface is slightly angled. This allows the speaker to remain stable and ensures consistent performance without rocking or compromised support.Superior Isolation by DesignWith some isolation feet the metal housing rests directly on the floor creating a rigid path for vibrations to travel regardless of what is inside. The GAIA N

The ISO Stands is the latest generation of IsoAcoustics stands designed for studio monitors. The ISO Stands are an updated version of the popular ISO-L8R series and features a lower profile new frame design and a newer version of isolator for improved performance. The ISO-130 isolation stands are the smallest stands within the ISO Stands family.Offering 14 variations of height and tilt the ISO-130 will help you optimize the placement of your monitors and bring your tweeters to ear level. The IsoAcoustics patented isolation system provides superior isolation and decoupling from the supporting surface. The stands are biased to keep all energy in alignment with the listening position providing greater clarity and focus.Perfect for Optimizing the Placement and Performance of Small Studio MonitorsAn important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener and eliminate soundwave reflections off the supporting surface. In a typical Desktop Audio Workstation (DAW) configuration the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands.Exciting the supporting surfaceThe isolators manage the energy of the speaker to reduce vibrations resonating through the supporting surface to eliminate dissonant sounds in the listening area or joining rooms.Reducing internal reflectionsInternal reflections are vibrations reflecting back up the speaker cabinet which causes smear. Smear is a result of artifacts replicated in both channels which are perceived to be in the middle causing the stereo image to collapse. The IsoAcoustics isolators reduce internal reflections to eliminate smear. The result is an improved stereo image of natural spatial sound. What's in the Box2 stands (

Crafted with the vision of providing extraordinary acoustic performance the GAIA III is the union of aesthetic visual design and acoustic engineering. The small compact design delivers unbelievable acoustic isolation that will bring out clarity and openness from your speaker like you’ve never heard.Optimal results are achieved by installing the GAIA isolators with the logo facing the listening position or rotated 180 degrees to align the isolators with the speaker’s motive forces. The GAIA III provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Lift and place the speakers into position as the GAIA lower isolators will adhere to the supporting surface.The GAIA’s are threaded into the base of the speaker or subwoofer to replace the existing spikes or feet. Threading the GAIA’s into the base of the speaker creates a strong connection with the speaker. With the top of the GAIA housing connected with the speaker and the bottom of the GAIA connected to the supporting surface all of the energy is then managed by the GAIA’s internal isolator.The GAIA III includes thread adaptors for sizes M6-1.0 M8-1.25 and ¼”-20.What's in the BoxGAIA III Isolation Feet (x4)Thread adaptors for M6-1.0 M8-1.25 and ¼”-20SpecificationsDimensions (H x Dimension): 1.5" x 1.7"Weight Cap: 70 lb per set of 4Quantity: 4 per boxThread sizes included: M6-1.0 M8-1.25 and ¼”-20