Kanto - Pro Series Recessed In-wall Full Motion Articulating TV Mount for 35" - 65" TVs - Black
Reviews coming soon
About this product
R400 is a mount made for Pro’s featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18” of extension.
PERFECTLY FLUSH
R400 is a true zero gap TV mount that allows TVs with a VESA pattern of 300x300 or less to sit directly against the wall for a completely flush look. The profile only increases to 0.3” if using the 400 mm VESA extensions.
OUT OF SIGHT
The recessed box is deep enough to store streaming boxes and other small AV accessories behind the TV for a clean, modern setup.
CONTRACTOR FRIENDLY
A foldable, in-wall template for new construction can be temporarily placed between studs letting contractors plan cabling and drywall while the mount sits safely in its packaging until needed.
POWER WHERE YOU WANT
Metal knock-outs allow for the installation of power outlets inside the box so you can keep everything needed to power your equipment within the wall.
CLEAN CABLING
Metal cable management clips run along the length of the articulating arm while rubber grommets within the box help you to route your cabling without any mess.
- BrandKantoModel NumberR400Product NamePro Series Recessed In-wall Full Motion Articulating TV Mount for 35" - 65" TVsColorBlackAssembly RequiredYesMount ProfileRecessed
Reviews
This product doesn't have any reviews yet.
Compare similar products
R400 is a mount made for Pro’s featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18” of extension.
Secure any flat-screen television with this Kanto recessed articulating wall mount. It swivels 180 degrees and tilts, letting you adjust viewing angles, and it's streamlined, so televisions can rest flush with the wall when the mount is fully retracted. This Kanto recessed articulating wall mount is made from solid steel to hold up to 80 pounds.
The VIWLF128-B2 Large In-Wall Full Motion mount provides the optimal viewing experience with space for AV components built in. This full motion mount extends 28" with up to 67° of swivel left and right and sits just .5" from the wall when recessed. Mount arms fold into a 20" enclosure that can double as AV storage for streaming devices switches and more. With knockouts to add power (not included) and cable management The VIWLF128 offers a stylish industrial design that achieves the ultimate all-in-one AV experience.FeaturesFor TVs 42"-85"fits between two 16" on center studsVirtual Axis™ finger-tip tilt to reduce glareSwivels up to 67° left and right (with 65” TV)28" of extension and sits just 0.5” from the wall when recessedSix components attachment slots with included VelcroClick-lock mechanismWhat's in the BoxVIWLF128 Premium Large In-Wall Full Motion TV Mount for 42"-85" TVsInstallation HardwareManualSpecificationsModel Code: VIWLF128UPC Code: 793795538741Product Width: 24.90"Product Height: 20.80"Product Depth: 28.00"TV Size Range: 42" - 85"Maximum TV Weight: 135lbsUniversal Mounting: Yes (100 x 100 through 600 x 400)Tilt: 4° / -10° (with 65” TV)Swivel: 67° / -67° (with 65” TV)Required Tools1/4" Drill Bit1/2" Socket WrenchAllen WrenchDrywall SawElectric DrillLevelPencilStud FinderTape Measure
Hang your flat-screen television securely with this Kanto recessed wall mount. The articulating arm lets you tilt and swivel your TV to the perfect viewing angle, and the design brings your TV to a position almost flush with the wall. Support TVs of up to 135 lbs. with this Kanto recessed wall mount.
Specs
I'm mounting this into an exterior wall and need to know how deep into the wall the box needs to go. (to ensure the wall is deep enough to hold it.) What is the depth of the box?
Answered by Kanto LivingThe product box depth is 9.7 cm 3.8” and the height is 25 cm 9.8”. If you have any other questions or require additional information, please email us directly at support@kantoliving.com, and we would be happy to help.
Customers often buy these together
Customers ultimately bought
$139.99The price was $159.99
Elevate your entertainment Sponsored
- $139.99The price was $159.99
Discover related products
Keep exploring
$229.99The price was $248.49
