KitchenAid - 30 Cu. Ft. French Door Refrigerator with Interior Water and Ice and FreshChill Full-Width Refrigerated Drawer - Stainless Steel

Thank you for sharing your insights with us. We regret that you have had a negative experience with your Whirlpool® Refrigerator ice maker. Please review the following professional troubleshooting tips for this concern: Ice Maker Operation/Reset: If the ice maker is making ice but not dumping it, try a reset. Unplug the refrigerator for one minute, then plug it back in. Wait a couple of hours and check for ice production. A common reason for no ice production is that the ice maker was accidentally turned off. You can try a power cycle (unplug for one minute) or use the reset button (if available) for a few seconds. Refer to ""How to Turn the Ice Maker On"" (https://producthelp.whirlpool.com/Refrigeration/Full-Size_Refrigerators/French_Door_Bottom_Freezer_Refrigerator/Ice_and_Water_Concerns/Ice_and_Dispenser_Concerns/Ice_Production/Not_Making_Ice/Not_Making_Ice_-_Refrigerator#s13394 ) for more information. If the ice maker is on but not connected to a water supply, it can cause a buzzing noise and lead to the refrigerator or freezer sections becoming too cold, potentially freezing food in crisper drawers. Water Filter Status: Recent Replacement: Ensure a newly installed water filter is locked into place for a proper seal. An improperly installed filter can reduce water flow, decrease ice production, or cause leaks. To check, remove the filter and dispense water; if water dispenses, the filter was installed incorrectly and should be reinstalled. Filter Replacement: It is recommended to replace the Whirlpool water filter every 6 months or when the indicator light comes on. A clogged filter can reduce water flow to the ice maker and dispenser, resulting in low ice production. Whirlpool recommends using everydrop® water filters. Find the right replacement filter for your refrigerator at https://www.everydropwater.com/. Flushing the System: Flushing is necessary every time the filter is changed or initially installed. This key step removes excess air and carbon. Air in the system can cause dripping at the dispenser, small/hollow ice cubes, or cloudy water. The required amount of water to dispense for a proper flush varies; refer to your filter's instructions (typically 1, 2, or 4 gallons). Water Line Installation: The refrigerator must be connected to a cold water supply using 1/4"" (6.35 mm) O.D. soft copper or PEX tubing. A service loop of tubing is recommended to allow the refrigerator to be pulled out for service. Check for kinks in the water supply line, as this reduces flow. Straighten the line and avoid pushing the refrigerator too far back against the wall or cabinet to prevent pinching the line. If these troubleshooting steps do not resolve your concerns, please feel free to reach out to us through any of the following options: Facebook: https://tinyurl.com/Whirlpool-Facebook Instagram: https://tinyurl.com/Whirlpool-Instagram Live Chat: https://www.whirlpool.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-253-1301 (Monday - Friday, 8 AM - 6 PM ET) We look forward to connecting with you soon!

Hello! Yes, the interior of model KRMF336SPS is white. The middle drawer cannot be used as a freezer. Thank you for your inquiry about our KitchenAid® appliances.

Hello! For model KRMF336SPS there is 2 Full Width Plastic drawers. Thank you for your inquiry about our KitchenAid® appliances.