Customer Ratings & Reviews

I received a latch edition to review and while it didn't fit my front door perfectly, I enjoyed it so much I had to have one for my front entry door so I purchased the Satin Nickel Deadbolt edition. Some key distinctions between Lockly Secure versions, they are all compatible with the new Wi-Fi Hub, but the Secure is the base model with keypad and physical key. Plus adds fingerprint scanner. Pro has fingerprint and also adds the Wi-Fi hub. While its great Lockly made the Wi-Fi hub backward compatible with all 3 units, if buying new the Pro edition is the way to go without a doubt. So Lockly Secure locks with the Wi-Fi hub can control your lock at least 5 different ways, all of which are important but the two methods that are real game changers are the finger print reader and the remote/smart home controls enabled with the Wi-Fi hub. The fingerprint reader is the best method of entry for day-to-day usage but the remote access and lock/unlock is great in a pinch or emergency for guests, visitors and family members. Overall I think the deadbolt unit is the easier model to use and works great with existing hardware, but it does have some flaws detailed below: 1) If you leave your door ajar, after 30 seconds with auto-lock the bolt will extend even if the door isn't closed, meaning you need to manually close the bolt to close the door. It would be nice if the Wi-Fi door sensor prevented this from happening. 2) The inside door housing is not satin nickel it is plastic, unlike the latch edition. It doesn't feel cheap, but its not as premium as the latch edition. 3) Hardware is not universal. The deadbolt fit better than the latch edition which left holes everywhere, but its not going to be perfect for everyone. Make sure to check your hardware. The deadbolt fits perfect with my Schlage hardware. 4) Fingerprint reader is a problem for left in-swinging doors since it is close to the jamb. 5) Fingerprint reader is not as forgiving as iPhone touch ID. I had to register my index finger twice to get some shifted imprints to register. Still, my wife and I love this device and its easily one of our most appreciated tech home upgrades!!! The only real limitations are which door you want to protect with Lockly and whether or not it fits the existing holes in your door. Installation was simple, about 15 minutes using the manual rather than Bilt app and another 10 minutes to enable everything in the Lockly app. I only needed Phillips head screwdriver but a flathead may be useful as well to remove existing hardware. While it is expensive, the functionality and convenience it enables is well worth the increment in price.

This lockly product is awesome! If only I have more money, I would get the more advanced version with the doorbell and cam. Easy to install. Fits right through the existing door hole for replacement.

The LOCKLY works pretty good. Don’t have to worry about our kids having their keys. I’m still having troubles connecting the unit to WIFI.

Truly recommend this ,it fulfilled my expectations on what i wanted in a lock. So many options to choose from in access codes and fingerprints . And works with Alexa. Not disappointed at all.

Installation: I believe for my door the installation was easy because I was replacing a deadbolt lock. It took me about an hour because I took the LOCKLY secure pro off a few times to troubleshoot an issue with the lock and unlock. I have to admit I was trying to install the LOCKLY secure pro before thoroughly reading the installation manual. I missed >the hold the program button while inserting the last battery< which is probably one of the most important part of the install. My door also had a door lever so I had an extra hole in my door. To fix that I found a matching lever from my local hardware store which cost me an extra $30. I purchased one without a lock to make the LOCKLY secure pro convenient and free from any other lock. *see my pictures for the finished installation with the matching lever I purchased. To get the complete usability of the LOCKLY secure pro I recommend that you also install the secure link hub, wireless door sensors and the LOCKLY app. Features I like: Fingerprint access- I don’t need a key or a passcode any longer because I can now use my fingerprint to get in my house. I can also give up to 99 individuals fingerprint access. LOCKLY app- I can give passcode access to individuals anywhere at anytime and can revoke their access whenever I want. I no longer need to make copies of my key or leave keys with individuals. Log and notifications- Now I have a date, time log of anyone entering that door after I grant them access. Auto lock- I have an added peace of mind now knowing that my door is locked every time it’s shut because of the auto lock. Pin Genie- The touch pad always shuffle the buttons to make it impossible for lurkers to manipulate a code. The features listed above are my favorites but there are plenty more features that will make this smart lock meet the needs of many. Appearance and quality: The lock looks great on my door but you may need to be creative with touching up your hardwares and paint to enhance the look of your front entry. I’ve been using this for only a few days but so far it is functioning perfectly and also seems durable. Review conclusion: This is probably one of the best smart lock in the market because of all the security measures that are put in place to help keep us safe and secure. LOCKLY went as far as having the patent pin genie that scrambles the buttons every time you enter a passcode so the code never looks the same. I enjoy having the LOCKLY secure pro because of the features but I’m taking 1 star away only because I think they should include an optional lever with any deadbolt purchase. I will still recommend this to anyone looking for a smart lock because everything else is great. If you are interested in knowing more about my experience please ask me with a comment.

This lock offers an all in one solution to manage access and a unique design. I appreciate its security features, but I do wish it had better integration with other smart home products. Everyone loves the finger print reader and my wife likes the automatically expiring temporary codes, but it can’t currently trigger actions like my old Zwave based lock. Pros: - Electronic key management is great. Guest codes expire after a set limit, share electronic keys in the application, one-time use codes, and generate offline codes for guest when data access is unavailable. One minor complaint is that it doesn’t allow restricting entry based on time of day. - Fingerprint reader works great – it is much faster than a regular key or entering a code. My kids can unlock it without remembering a code or carrying around a physical key (which they would lose or forget). - Comes with a hub to link the lock to the internet and a door sensor. You don’t need anything else to make it work – just download the app. - Interior off switch for when you don’t want anyone without a physical key to have access. - The manual lock is based on a Schlage cylinder, which I prefer over some other brands and should make cutting keys / rekeying easier. - Auto lock timer. I don’t use this, but it could be helpful and the app lets you disable / adjust the time easily. - The random code entry makes it impossible to guess your code from worn buttons or prints on a static touch screen. - Getting lock status and unlocking / locking with Alexa was easy (remember to look for the Lockly skill). Comments: - Overall the quality of the hardware is good, but the back of the lock is plastic (not metal) and the latch is silver (doesn't match the bronze). -Door sensor is hard to mount on doors with thick casings. I used extra double side tape, but it doesn't look professional. - Lock / Unlock status is not pushed, you have to poll the lock via the app(no unlock/lock notifications). You do get push notifications from the door sensor (open/close) and tech support says that they are working on this feature for the lock. This also means that you can’t currently trigger actions/routines in Alexa from Lockly. - The lock beeps when you access it remotely – even with audio off in the app (might be a bug). - The finger print reader is on the right side of the lock. This might be an issue if you don’t have enough space between the lock and the trim. - Install instructions are good, but the app can be a little tricky. Some functions only work on Bluetooth, but you have to switch to remote access to edit the door sensor push settings. I did find tech support very responsive and friendly. -The product was well packaged and came with extra screws / double sided tape, but the bag labels were backwards. If the screw is too short, you probably have ‘G’ and need ‘E’ instead. Set the parts out and match them to the diagram before you get the lock in the door and figure out you have the wrong screw. I would recommend this lock. It has some hard to beat features and is a great option for someone who just wants a smart lock and doesn’t want to by a separate hub. If you have a lot of other smart devices linked by an existing hub or want to trigger actions in Alexa, you will have to weigh the pros and cons. This is a quality product and I believe it will continue to get better with updates.

Pros: * Solid construction. * Easy to install and set up. * Flexible use; Bluetooth, WiFi, fingerprint, PIN code, physical key, etc.. * Comprehensive app. * Great battery life with emergency backup option. Cons: * Fingerprint sensor on side is not easy for left hands. * Cannot easily see lock status visually from inside. This deadbolt replacement lock is seriously well-built. While not simple to install, it was as easy as could be expected with the provided instructions, videos, templates and even labeled bags of parts. Installation was what would be expected for any similar replacement of an existing deadbolt with a new one. There are 3 major parts to set up; the lock itself, the magnetic door sensor and the WiFi hub. Only the lock is required, but the rest of the stuff enables app control and the ability to know whether the door is open or closed. Setup of the WiFi hub and the door sensor are done with the assistance of the app since both are useful only if you’re going to use the app or integrate with voice assistants/home automation. Once everything is set up, the lock works great! You have 4 way you can lock/unlock the door: 1. PIN Code: The PIN code option is this lock’s most unique feature. Most keypads get either worn out or have rub/dirt patterns for the digits that are used most often. Potential thieves can sometimes decipher your pin code just by looking at what numbers are dirty or worn out as those are used most often. Some even spy on you when you’re pressing the digits and thus can see what buttons you’re pressing to learn your code. That’s where Lockly is so great! The buttons you press are on-screen (easy to clean and won’t wear out) plus they randomize their positions so spies can’t figure out your code just by watching. 2. Fingerprint: Not unique to Lockly, but still well-done and convenient. Tap your registered finger on the reader pad and the door unlocks - that’s it! During setup of this feature, you can name your registered finger and that name is even shown in the logs for how and when the door was unlocked! 3. App/Voice control: You can lock/unlock via the app or if you set it up; via Alexa or Google integration. 4. Key: If the above fails or you’re just feeling old-school, you can use the provided metal key. No fun, but works even if the batteries are dead. Speaking of dead batteries; if the batteries do die and you don’t have the key handy, just find a 9V battery and touch it to the terminals under the lock (on the outside of the door) to give it enough of a charge to unlock with any of the other methods. Once inside, you can then swap out the AA batteries. There really are only two minor suggested improvements I have for this near-perfect lock: The fingerprint sensor is on the right side of the lock. While this is fairly convenient for unlocking with your right hand; not so much for your left hand. I’d be happier if they moved the sensor to the top (and slanted down toward the front to keep any water from pooling on it). The app is useful for knowing when the door is locked or unlocked. If you’re inside, it’s sometimes just faster and more convenient to look at the thumb latch on the inside of the door. If the latch is vertical, the deadbolt is locked; if horizontal - it’s unlocked. This would be a lot easier if there were any visible contrast between the latch and the inside part of the lock. As it is now; both are the same color so it’s nearly impossible to just look at the inside part of the lock to determine if it’s locked or unlocked. Otherwise, everything is rock-solid. The app works reliably, the features are easy to use and very flexible, and the lock itself is solidly constructed. This lock may be overkill for some; but most will appreciate its many features.

This unit is my first attempt at automating entrance to our front door. The Lockly Secure Pro Deadbolt offers a number of different methodologies to use, including fingerprint access. The Lockly App, which I downloaded from the Google Play Store, is used for making security-level changes. Installing the Lockly Deadbolt took a bit longer than I had expected. The installation instructions recommended downloading an app called Bilt, which is an interactive tool that walks you through the installation process. My mistake was using Bilt on my phone at the same time as the Lockly App, also on my phone. If I were to do it over, I would run Bilt on my laptop and the Lockly App on my phone. My problem was flipping back and forth between the two apps caused me to lose track of where I was during the installation. Not a big deal, but I found it distracting. The Lockly App has four options at the bottom of its main screen. They are Control, Log, Access, and Setting. -------------------- CONTROL: The Control option has several features. Among other things, it shows the battery level of the four AA batteries installed in the unit. I didn’t see it written anywhere but I’m hoping that the unit will send out a heads-up alert whenever the batteries hit a low-power level. This might be written up somewhere, but I don’t remember having seen it. I understand that when the battery is low that an indicator shows its low-battery status on the keypad screen on the front of the unit. Also on this screen is an icon at the top left that looks either like a Cloud or a Bluetooth connection. The Cloud indicates that you are connected to the Lockly Deadbolt via an internet connection. Tap the cloud icon and it changes to a Bluetooth icon. You’ll need to know this because a number of functions require you to be connected by Bluetooth to make changes to the lock. For instance, I had to change it from Cloud to Bluetooth in order to change the physical name of the lock. Using a high-level of skill and awareness, I named our front door to be “Front Door.” Clever, huh? This ‘Name’ is how the app (and Google Assistant) distinguishes one lock from others if you have more than one installed. LOG: The Log tracks all activity on the Lock, like the fact that the lock was unlocked or locked. If you set up a special login for someone, then it will record that that person unlocked or relocked the deadbolt. ACCESS (Access Code): Access is the app function that allows you to set up new users. There are Trusted users, Guests, and One-Time access. Trusted Users are stored in the system long-term and are removed only when you act to specifically remove them. Guests are added allowing you to specify how many days, weeks, or months their access will remain available. One-time Access, as the name implies, will create an access code for one-time use only. ACCESS (OAC [Off-line Access Code] Users): This option works by creating a special login code, one that you will text or email to a specific individual. Using this code, which is in the format 9999-99999, the individual will gain access by using the keypad on the exterior side of the door. It goes like this: Enter the code, press the Enter key (which looks like a fingerprint), enter the code a second time, followed by the Enter key, and the door unlocks. Like the Guest option above, you’ll need to specify a Start and End Date/Time that the 9-digit code will be active. When a user’s OAC access is set up, the Lockly App generates a message that can be sent to the individual with information about their 9-digit passcode, and instructions on how to use the exterior keypad. I did a test run and created a new OAC, then texted the message and 9-digit code to myself. When ready, I’ll forward the message to the intended person. ACCESS (FINGERPRINT): The Lockly Deadbolt has a fingerprint scanner on the side of the unit. Using the app, select the add fingerprint option to start the add process. The user will be prompted to select a specific finger and to press that finger against the sensor six times. The instructions state that the selected finger should be placed on the sensor at different angles to ensure that the fingerprint is fully scanned. If any of the six scans are unreadable, the fingerprint will not be added to the database. This was a very easy process and was very similar to adding my fingerprint to my Pixel 3XL phone. According to the manual, this unit has a capacity of 99 different fingerprints. ---------------- This Lockly Deadbolt came with a WiFi Hub and Wireless Door Sensors. The Hub consisted of a small wall charger and communication module. This combo lets you Lock, Unlock, and monitor the smart lock remotely. The instructions require that the Hub be no further than 10 feet from the deadbolt. I have the Hub in a room adjacent to our front door, but still within 10 feet from the lock. And it works just fine. The Wireless Door Sensors I mentioned earlier will let you know the current status of the door, such as if the door is securely shut or still open. Each time the door is opened or closed you’ll get an associated message reflecting the new status of the door. I’m a heavy user of Google Assistant and the Lockly is nicely integrated. As such, I’m able to check the status of the Lockly by asking Google Assistant “Is the front door locked”. I can do this from anywhere, at any time. Or I can issue a command “Lock the Front Door” or “Unlock the Front Door.” Unlocking the door is slightly different from locking it. When set up initially in Google Assistant, you’ll need to declare a 4-digit passcode for the unlock process. So, tell Google Assistant to “Unlock the Front Door,”, it’ll then prompt you to verbally state the 4-digit passcode. I’m not entirely sure how I feel about having to state the passcode out loud since I think it makes more sense to type in the passcode. Just saying. The Auto-lock feature is a nice one to have. Essentially, it has a timer to auto-lock the door with a timer range of 5 seconds to 5 minutes. Or it can be disabled entirely. In the event you let the deadbolt completely run out of battery you can hold a 9-volt battery to the bottom of the deadbolt to provide short-term power. Don’t worry about polarity as the Lockly automatically detects battery polarity. So, hold your 9V battery in place against bottom of the Lockly to temporarily activate the screen so you can enter your appropriate access code or fingerprint. Once unlocked, it makes sense to replace the internal batteries immediately. Additionally, two physical door keys are included in the kit for your use. All in all, I’m very impressed with this unit. It more than meets my needs and then some. The only complaint I’ve fielded is how bulky the unit is on the inside of the door. And with our front door being white and the deadbolt dark in color, the color differences are apparent. Wouldn’t it have been nice if different color shells were included for inside use.

This bluetooth deadbolt lock is very nice. Installation went pretty much without incident. It took me about an hour. If you have an existing deadbolt on your door, as I did, you can likely use that hole as the deadbolt is adjustable between the standard sizes of 2 and 3/4 and 2 and 3/8 inches. I did have to enlarge the striker plate opening on the jamb, which required a little treatment with a wood chisel, so be prepared for at least that much carpentry when you go to install this. Otherwise, installation went exactly as described in the manual. Once the lock is on the door, you install the batteries (4 AA, and they were included in the box) and the system initializes. Then you install the Lockly app on your phone and pair it with the doorlock. This went smoothly, and, with a touch of the phone’s screen, you can lock and unlock the door. Included in the box is a wireless hub, called the “secure link wi-fi hub,” which allows access to the lock via the internet, so you can unlock or lock the door when you’re away from home. Also included is a door sensor which, when installed, will allow the system to know not only if the door is locked or unlocked but whether or not it is actually closed. With both the hub and sensor installed, you can tell if the door is open or closed from anywhere. Installation of both the wi-fi hub and the door sensor was without incident. The kit comes with two conventional door keys so you can always unlock the door from the outside the old-fashioned way. Part of the setup process includes creating an access code so you can unlock the door from the outside by entering numbers in a keypad (see photo). When you exit the house, just touch the keypad, and the door locks. You can add other users, such as your spouse or other members of your household, so they can control the door from their phone. You can set up guest accounts for short-term or one-time access. I want to add one other comment. I’m very impressed with the overal quality of the lock hardware itself. I’ve installed a number of deadbolt locks on doors in my time, and few of them have been of as high a quality as the construction of this deadbolt and associated hardware. It is much better quality than the lock I had on my door, and I paid a pretty penny for that lock. Overall, this is highly recommended if you want a smart deadbolt lock. You need a little bit of mechanical and perhaps carpentry ability, and if you’ve every installed any kind of door hardware, you have that expertise.

Wow this is a really cool dead bolt. That's what I will start. It have a beautiful asthetic appeal to begin with. Very easy to use very quiet. Opens the door quickly. I have tried the finger print, wireless app and remote open and close. I can say without fail it is fast and smooth. I set up the door dead bolt pretty quickly. I am pretty mechanically inclined and was able to breeze through the install. But with that being anyone who cna follow the detailed and acurate installation guide can put this lock on within an hour or so. Everything is included to get it installed. Even if you are installing this on a new door with no holes they in led the template for installation. How cool is that. To top it off you have the ability to use it on different door type and the lock is adjustable for both types. I highly recommend giving this lockly a chance outside of the normal industry names.

It amazed me with how easy it was to install out of the box. I really only used a Phillips head screwdriver and a pocket knife to install this. I thought it would take much more time to physically install plus setup via the app but again I was mistaken. The app was easy to use for setup and I was impressed. The finish of this is also one of my favorite things about this smart deadbolt. I feel like this is probably one of the most secure smart home devices. The fingerprint reader is useful for a quick entry, the included keys are also there for saving you when your batteries die out. I feel this device is a sleek and stylish way to keep up in this high tech society.

At first glance, the Lockly electronic deadbolt may seem like other “smart” home lock that’s just a gadget. Once you tap the input screen, that impression goes away. This adds some real security to your home. Two killer features are offered by this lock: 1) the numbers on the screen re-order themselves each time it appears. This prevents onlookers from observing the pattern you make on the screen, then duplicating it. 2) a fingerprint scanner on the side of the lock uses the same technology as Apple and Samsung in their latest devices. Another great feature is the ability to set a code with an expiration date. This is great if you have a house guests who may have a different schedule than you. You don’t have to leave an extra key or change your personal door entry code when they leave. The door even automatically locks after a preset time you control between 30 sec and 5 minutes. Installation was very straightforward. You have a choice of paper directions included in the box or downloading an app which will give you an all around view of what you are to be doing. I opted for the app directions which I found to be easy to follow. All told, I completed the installation in under 30 minutes, including initial programming for the passcodes. Please note, you must have a Bluetooth capable phone in order to set this up. You may optionally use the app on your phone to unlock the door, but it is only necessary for set up. In addition to Bluetooth, this unit includes a Wi-Fi bridge. With the bridge, you have the ability to open the lock from anywhere in the world using your phone. You can also see the status of the door, including whether it is open or not. The app can be set to notify you anytime the door is opened and closed. It comes with four AA batteries which power the motor. Only used in a short while, so I can’t say how long it may last The only trouble I had with the lock is that it does not retract fully into the door (see picture). I tried lubricating the lock and moving back and forth multiple times. While it pulls back far enough or me to open the door, your mileage may vary. It was my only complaint for an otherwise beautiful piece of hardware.

This smart lock is all you need to complete your smart home gadgets. Everything about the Lockly Secure Pro Deadbolt Edition smart lock is awesome, from being able to monitor and control my door through the Lockly app, easy and secure access via the secure digital keypad, fingerprint sensor or with the two keys included ,also it is nice to being able to share access codes with family and friends. The deadbolt was easy to install ( if you’re replacing a current deadbolt) , no tools necessary , just a screwdriver, unless you want to drill a hole on your door for extra secure and stable installation on your door, but not necessary since it comes with a really strong 3M adhesive on the back of the deadbolt plates. There’s a great app that Lockly recommended to help you install the smart deadbolt with a 3D video ( BILT App). One of my favorite features from this smart lock is that works great with Alexa, I can check if my door is locked by just asking Alexa, also you can get notifications on your phone in case your door is ajar or unlocked. Another great feature I like is how you can locked your door by just taping on the digital screen. What I like most about the Lockly secure pro deadbolt : Easy to installation Five different ways to unlock PIN Genie digital keypad 3D fingerprint sensor Easy to share secure access codes Alexa/ Google compatibility Long battery life Bluetooth and WiFi connectivity Beautiful Venetian Bronze finish Reboot button and a 9V battery emergency charging socket

I recently installed the Lockly Secure Pro smart lock and found it to be a great addition to our home. Installation of the lock went fairly well. The directions are well-explained although I made a bit of an error by not leaving the deadbolt extended when installing so I had to go back and re-do the installation, completely my fault. Once I downloaded the app setup and connection to the wifi was flawless. The only thing I could not do was install the door sensor because our internal door frame has trim molding around it; I suppose I could notch out a space in the molding to add the sensor but I decided not to do that. Without the door sensor you cannot use Amazon Alexa or Google Home Assistant but that’s not a big deal to me. Since installation the lock has worked flawlessly. My wife and kids have all registered their fingerprints and the fingerprint sensor works very well (you can add up to 99 fingerprints). My kids also wanted their own access codes so they can use those, too. The finish also matches our existing door hardware perfectly. Overall, the Lockly Secure Pro works great, looks great, and gives me peace of mind when I’m away from home. Great product!

The Lockly Secure Pro Deadbolt Edition is the latest smartlock from Lockly. It boasts 5 ways to unlock your door while being more secure than its competitors. This lock is actually more of bundle of their current Secure model paired with their Wi-Fi Hub. The Secure Pro brings this bundle together - and saves you about $30 in the process. I swapped my 1st gen Kevo out for the Lockly to see how I would like it, and after a few weeks I will not be going back to the Kevo. The Lockly is here to stay. Design From the looks department the Secure Pro certainly looks and feels premium. My Secure Pro Deadbolt has the Venetian Bronze finish, which looks fantastic. The lock comes with 2, Type 97 6 pin keys – slightly more secure than standard 5 pin keys. The front keypad display blends nicely with the outer housing and has a nice fit/finish. The display itself is plenty bright and clear enough to see even in bright daylight. It is certainly responsive enough for my tastes. The display is resistive (like your smartphone), so you might have to pull off your gloves in the winter time if you are punching in a code. The code display has 4 circles, each with 3 numbers, displaying 0-9. This means 2 numbers will be repeated in the pattern, and the pattern shifts/jumbles after each code entry. This makes you lock secure because no one can reasonable peak over your shoulder to figure out what numbers you pressed. This means nothing though if your keycode is easy to guess – I’m talking to you 1234 or 1111 etc. code users. The fingerprint sensor is located on the right side of the lock. The lock can store up to 99 prints. I scanned all of my fingers, since I never know which hand or finger will be free. I was very excited about the fingerprint reader because I have small kids. Remembering a code or carrying a key is difficult to impossible to rely on right now. Unfortunately I couldn’t get good scans on their fingers to get them registered with the lock. In the manual it states that the fingerprint reader is designed for users age 12 and up due to the size of their fingers and how much your print changes as a little kid. Not a big deal, but I am kind of bummed on this one. The outer body of the Secure Pro is hefty and feels very well built. The lock comes with 2 options to mount – using double sided tape or drilling another hole in your door and adding a support anchor. I went with the tape for now, and unless I have issues that’s what I’m going to stick with. The finish really is quite nice and matches well with the Kwikset knob I bought to go with it. The interior portion of the lock is a fairly benign looking box. It has the same finish as the exterior, but this portion of the lock is made of plastic making the texture feel different. The knob to lock/unlock turns easily, and there is a switch to disable the front keypad if you don’t want that option available. The lock connects with Bluetooth directly to your device or over a cloud connect when paired with the Wi-Fi hub. Unfortunately for me I was unable to connect my phone to the lock via BT. I have an LG V20 running Android 8.0. My phone has no problem connecting to other BT devices, just the lock. I was able to connect to the lock with an old ASUS Android tablet I had, and soon I had the lock setup how I wanted. Once it was connected to the Wi-Fi hub I could connect my phone via the cloud to the lock. The BT issue could be app related or some oddball hardware interaction. Either way, not a dealbreaker since I have the cloud connection, and I will replace my phone in the near future. I couldn’t connect my phone to my Kevo either (not a supported device), so it’s not an unfamiliar issue to me. Features There are a couple of features that I haven’t already mentioned. First of all is the auto locking feature. By default, the deadbolt locks itself 30 seconds after unlocking. In the app this can be adjusted up to 5 min or off. I set mine to 5 min, but I usually lock up right as I’m leaving. The lock the door from the outside, just tap at or swipe across the screen. Through the app you are presented with a whole list of settings and status messages. If you install the door location sensor the app can tell you if the door is open/closed and locked/unlocked. Without the position sensor you would only know the status of the lock. The Secure Pro comes with a few extra features over its non-Pro brother. This is mainly due to the inclusion of the Wi-Fi hub. The hub allows remote monitoring and control of the lock from anywhere. Like the position sensor mentioned above, you can access this data through the cloud app. With the hub you can also use Google Assistant or Alexa to ask about the status of the lock or control it. If you disable auto locking, the voice control can be really useful if you are off in your house and need to lock/unlock. Even with all of the access redundancies, you can still find yourself left outside if the unit’s battery dies. As long as you can grab a 9V battery you can touch it to the contacts on the underside of the lock body to jump start it and get you inside with your choice of access. I will probably not need this since I would always have the keys, but would be useful for renters or guests who don’t have the keys available. This may not be a widely used feature, but it shows their design team was really trying to cover all of their bases. Interactions As far as day to day use goes, I almost exclusively use the fingerprint reader to unlock. The reader is very responsive, and I have only had issues when my hands are wet or dirty. Once they are dry/clean then it unlocks right away. It’s almost as sensitive as the reader on the back of my phone. I use the code when my kids are there so they can eventually learn it. I have unlocked over the internet 1 time, which was super useful in that instance. I could have given out the code or generated a guest code, but unlocking it myself was easier since I was already getting into the app. I have unlocked/locked the door using my google assistant. My house isn’t really big enough to use this, but I can see this being quite useful in a large house. To unlock, I have to provide a pin code to my Google before it will send the command. That keeps someone from shouting outside your house to tell a Google Home device to unlock the door. Thoughts The first thing I found odd about the Lockly Deadbolt was the use of the Type 97 keys. I initially thought they looked bigger than usual (I was right – 6 pin vs 5 pin). When I went to get a new front doorknob to match the Secure Pro’s finish, I was unable to buy a knob or handle that used Type 97 keys. The only ones that did were commercial style handles that are in no way meant for residential front doors or large (and pricey) handle/pull sets that can’t be used with my door or the Secure Pro. I am now resigned to carrying 2 keys on my keychain, whereas before I had 1 key for my whole house. This is truly a first world problem, but nonetheless still an annoyance. Installation was pretty easy for me. I just got done replacing all of the knobs inside my house, and I've replaced and fiddled with deadbolts plenty of times. With that being said, follow the instructions. I knew pretty well was I was doing an I still followed along just in case. There are a couple of areas where you will be glad you did - torque bar position and battery installation procedure. Once you sync a BT phone or device to the lock, you have to use the connected device to handle all of the fingerprints, passcodes, etc. Prior to syncing you could enter passcodes and fingerprints using the touchscreen and the program button on the inside portion of the lock. I would suggest pairing a device just to get the most benefit out of your lock, but you can certainly use it with a paired device. Using the position sensor was tricky for me. My door sits further in the pocket and I have trim running around the threshold. This presented a problem for me since the sensors couldn’t really line up due to the door depth issue. I decided to use the leftover double sided tape to build up the door mounted sensor to match the stationary sensor mounted to the trim. Not the most elegant solution, but it works for now. I will make something better in the future. When I contacted Lockly support about my phone issue, they were awesome. They really put in a lot of effort helping me troubleshoot, and even went as far as sending out another lock to rule out a hardware issue with that first lock. Customer service can make or break a new product, especially in the IoT world, and here Lockly did a superb job for me. Overview The Lockly Secure Pro is a truly great smartlock. It has 5 ways of allowing you access to your home all while keeping them secure. Even with my phone issues, I am very happy with the lock. It’s a robust design that seems to be built for long term use. The breadth of features is excellent, and really has something for everyone. The use cases for this lock are numerous from personal use, to rentals, to large family households, and so on.

Overall, I’m very happy with this lock. As a first-time smart door lock user, I’m very impressed with the quality of the hardware, as well as the app integration. The whole system is intuitively designed. And the app’s interface is simple but useful. I don’t think I would be as impressed with this lock if it didn’t have Wi-Fi access. Fortunately, this version of the lock (the Pro version) can connect to the internet so the lock can be monitored and controlled away from home. Having the ability to remotely monitor the lock and door’s open/close status really completes the lock’s overall package. In terms of the actual locking and unlocking of the physical lock, the design couldn’t be simpler. I found using the secure fingerprint sensor as the easiest and most convenient way to unlock my door. The lock also has a touchscreen display for entering “key” codes, which is just as easy to use. And its ability to scramble the keypad on the display (PIN Genie technology) really adds an extra level of security to the lock. Speaking of security, the lock provides multiple options for providing access, including a physical key. There are ways to provide online, as well as offline access. Online access allows the recipient of a keycode to use the Lockly app to open and close the door lock. Offline access doesn’t require the recipient to use the app, or a phone for that matter. The company really did try to think of the many ways the lock can serve the needs of different users (home, office, renting out, etc.). One feature that is missing as of right now is the ability for the lock to automatically unlock itself as you approach the door. This auto-unlock feature would be useful if you’re approaching the door with your hands full. However, this may be a feature added in the future. While reading from Lockly’s help and support section, I found a posting from Lockly that stated they are working on this feature, but they do not want to release it until it is fully vetted and secure. The rest of my review is mainly geared towards a few tips and tricks I discovered while installing the lock. Overall the install is relatively easy if you are replacing a current lock or deadbolt. Lockly does provide very detailed and intuitive instructions on how to install the new lock. They even provide a link to a video if needed. My install took about a half-an-hour. I would have been done with the installation at that point, but I decided to remove my old strike plate and install the new one that came with the lock. I also used longer and more secure screws for the strike plate (3-inch #8 wood screws). I describe this further below. But first here are a few tips: When securing the bolt portion to the outside box, it’s very important to align the box and lock properly. To do so, you can use the provided 3M sticky tape to stabilize both sides of the box. Please note that the tape is rather strong, which is a plus and a negative. It’s a plus because the box will stay in place quite nicely while both sides are being attached to the door. It’s a negative because if the box (both sides) aren’t aligned properly, the bolt won’t slide in and out smoothly. A small amount of force (pulling) is required to unstick the tape from the door in order to reposition the box. The nice part about the 3M tape is that the stickiness remained even after having to reposition the box a couple of times. Also, when tightening the bolt to the door with the provided long screws, it’s important to tighten both bolts evenly (see red arrows in pic). By tightening them evenly, the bolt will slide more freely when locking and unlocking. This is important because if there’s an obstruction with the bolt, the box’s locking motor will not work properly. This is not unique to this lock; any door lock will encounter problems if it’s installed unevenly. And finally, as mentioned above, I choose to install the larger door strike plate that came with the new lock. The strike plate is the metal plate/box/hole that the deadbolt slides into. I could have left my current strike plate in place, but I decided to chisel out a larger square, as well increase the size of the hole with a drill bit (see pic). This is where I also installed the longer more secure screws to increase the strength and security of strike plate. Four 3-inch #8 wood screws coast $1.50 at my local hardware store. Overall, the lock has been working well with no issues. Again, I recommend getting the version with the Wi-Fi access which includes the door sensors. It’s nice being able to check the app while I’m away to see if my door is closed and locked. I also want to mention that the Wi-Fi version also integrates with Google Assistant and Amazon Alexa. I was able to easily setup the lock via the Google Home app to communicate with my Google smart speaker. I can give voice commands to check the status of my door, as well as ask Google to lock and unlock the door. Please note, unlocking by voice requires an additional pin that you select at setup for added security. Overall, I am very satisfied with this lock.

Since smart home devices have hit the market several years ago, I have been searching for a smart lock for my home that would fit the bill for everything I was looking for. I wanted that lock to be easy to use, but I also wanted that lock to ensure the wrong person cannot access my home. Then came Lockly! Let me start off by saying that this may just be one of my favorite smart home devices. It offers so many different, convenient features, all in a very well finished package. The lock comes well packaged with everything you need to get it up and running and to get the lock placed on your home network (with the wifi bridge). The instructions are very detailed and, in my opinion, easy to follow. I removed my old "key only" deadbolt. The Lockly deadbolt fit in the hole that was already existing in my door. However, the lock does come with a template just in case you needed to drill a hole in your door. The only adjustment I had to make was to the deadbolt latch itself (due to my door thickness) which was very simple and outlined in the instructions. The two halves both have an adhesive strip on the back of them which adds stability to the lock and also prevents you from having to drill an additional hole in your door. I found the lock to be completely stable using the adhesive strips. After inserting the two halves together and screwing them together, all that was left to do was to add the batteries. At that point, make sure you follow the instructions, as you are supposed to hold down a button prior to placing the 4th battery in the unite. The lock powered right up and performed a self-check. After that, all that was left to do was to set up the lock with my phone app (I have an android). The lock can either connect to your phone via bluetooth or wifi (if you have the wifi bridge). The instructions walk you through the entire bluetooth and wifi setup process. The wifi bridge features an added door sensor that must be installed to allow the app to know if your door is closed. This will show you, when you access the deadbolt remotely, if the door is both closed and locked. Using the android app, my phone sensed the lock immediately with no issues. From the app I am able to control the lock remotely (with the wifi bridge) or on site with bluetooth. I can issue permanent and one time use unlock codes, as well as program finger prints for different users to unlock the lock. I can see a history of how the lock was unlocked and what code or fingerprint was used. The lock also features, what I think, is the best touch screen on any smart lock on the market. When exiting your home, all you have to do is touch the screen and the lock will automatically engage. If you in a hurry, this is a great time saving feature. The lock also has an "auto-lock" feature that will automatically engage the deadbolt after a set amount of time if the feature is engaged. The lock features four circles where the numbers are located. Every time the lock is used the numbers change location on the touch screen. This is a very cool added feature for additional security of your residence. The lock comes with two keys for use of the traditional lock/unlock feature as well. The deadbolt has a cover that slides over it that protects the lock from weather. The lock is normally powered by 4 AA batteries (included in the packaging). In the event the batteries run dead, the lock has two poles on the front bottom that allows you to place a standard 9v battery against them. This can power on the lock to allow you access if power is down and you do not have a key. This lock can be integrated with other smart home features, like Alexa! I am able to ask Alexa to lock up my home for the night and she can engage the lock for me. She can also unlock the lock but that requires an additional code voiced to Alexa before she will unlock the deadbolt. This lock has added so much convenience to my life. Just the other day, we had some friends from out of town come to our home and we were not there yet. I quickly opened my Lockly android app, unlocked the door, and they were able to enter my home so they did not have to sit outside and wait on me to get there! I feel this lock packs the most features for the best price and I feel it is safe and secure. Get a Lockly deadbolt, you won't be disappointed!

This is my absolute favorite smart lock. I've personally installed 2 Kevo smart locks and one Yale smart lock, which are all very capable, however my favorite lock of all is this Lockly Secure Pro Bluetooth Deadbolt lock. I love the many ways you can use to gain access such as via the app (via cell, wifi or bluetooth), fingerprint, access codes, keys and One Time Use codes, which can be provided very easily. Also, the fact that you can issue a code even though the wifi may be down and it works offers a great peace of mind. It's awesome to be able to see if the door is both CLOSED and LOCKED or UNLOCKED is fantastic. I can't say enough great stuff about this lock and totally recommend it to others.

No issues. It works great. I mainly use the fingerprint sensor to unlock the door. I love that I can set up permissions for various people and only allow them access at certain times/days. The app can lag pretty badly sometimes but it isn't too bad. I initially had issues connecting the WiFi adapter and reached out to Lockly support. The hold time was long which wasn't great but they helped me troubleshoot and realize it was an issue with my WiFi. Turns out it was my SSID (can't have any characters besides letters and numbers in your SSID). Overall, I'm happy with it.

Lock is easy to install and works great! The WiFi connection was spotty so I basically created a new network using an old router and pointed the secure link towards it. Seems to be working so far so good. The fingerprint sensor is the best feature!