Customer Ratings & Reviews

Alrighty guys, my review here will also have real pictures included of my installation and i hope they help you decide on going with these. Ok so lets get started! These rings are made of black Silicone and have a decent thickness. The thickness is between 1/16" to 1/8" so its not that thick when it comes to mounting height of the speaker sitting on the Silicone baffle. The lip of the baffle is 1 1/4" tall and when folded it goes down to 5/8" so it fits many install needs, it can also be trimmed to size with a sharp box cutter blade for a precise cut. I dont recommend scissors as it wont cut it well. Like shown in my pictures the inner diameter of the baffle where the 8 screw holes are at is a tiny bit larger then 6.5 inches. The inner diameter where the speaker basket/magnet would fit into is about 5.75 inches but remember that these are made out of Silicone so when you screw in your speaker just push the silicone corners closer to the edge of the speaker and tighten it up with the screws 1 at a time. The back of the baffle where the sleeve goes into the door cavity is a bit smaller at about 5 inches give or take. That part is also easy to cut down should it not fit due to thickness of the Silicone and speaker basket not fitting through the speaker bracket hole for installation. I cut all the rear part out so i can fit my JL Audio C7 speakers in the speaker bracket i custom made with ABS and a Router Table with a 1/4" flush Trim Spiral Bit as those speakers are pretty wide from the basket and magnet vs other 6.5 inch speakers. Overall i am very satisfied with this purchase and only wish i would have heard about these before buying my stinger fast rings almost a year ago as my project took a wile to put together due to funds. which the stinger fast rings seem very cheaply made vs these install bay Silicone baffles. Anyways i hope my pictures help clear some Fitment issues up and that you found my review helpful. These baffles were installed in my 2019 ford flex SEL, ill be making a video on these on my youtube channel called (The Average Guy1983) just look for a thumbnail pic of a Hispanic guy in a black JL Audio T Shirt lol if you wish to see them installed. I noticed that people talk good about these but never show install videos or pictures of them installed, so allow me to be the first one to do it here. Cheers!

I just recently heard of these and thought I'd give them a try. Compared to foam counterparts these are much easier to use. Better yet no need to trim to fit. They seal much better without pushing out on the door panel. There's a noticeable difference on sound quality as well.

These works remarkable and I highly recommend them when installing Speakers in Doors on your Mobiles.

Just as I stated about the 6x9s these things really project the sound through your vehicle and not through your door. Man I will never have speakers again without these. Outside my vehicle does not vibrate. Mainly due to the fact that the technician knew what to do with the phone pad and where it goes. To simplify this makes the sound come out of the front of the speaker not the sides and the air is moved out of the rear. What these do for your sound is noticeable.

Thank God they fit. Installed them with the massive 6.5 Kickers QS, I recommend it if you are putting high-end speakers or even regular quality aftermarket. It can improve sound quality and lower vibrations.

Much better sound than foam baffles. No cutting or trimming needed. Better seal against inside of door panels.

Simple easy to install helps protect speakers and makes the speakers sound good.

A must when changing out factory speakers. For sound and protection.

Fits good and contains the sound. May need to trim

They made my 6.5's sound so much louder and clearer. Never realized how much sound was lost thru the doors.

This product helps making your speakers sound amazing.

This is a good addition to my new door speakers. It help the sound get routed to the front of the door and into the interior of the car.

I had used speaker baffles before but there is no comparison with this kit. Definitely I recommend to everybody.

Didnt have much of a rattle to begin with but overall it took the the fine areas and made them much better. The Baffle kit and its styrofoam just adds the little extra touch to my already perfect setup.

Great deal for adding more sound with less rattle. Installed in my Suburban and wish I had these years ago

My Alpine six and a half fit perfectly in there. I just got a trim a little off the top I think. Definitely would recommend.

Great product and they sound is definitely more defined.

Rubber is much better than the stingers foam style

I haven’t installed these yet but they look like they will work well in my doors.

Easy to install. Quality silicon with adhesive foam