Ortofon - 2M Verso Moving Magnet Cartridge - Blue

Premium Moving Magnet CartridgeExperience transparent and articulate sound quality with the Concorde Music Black. The Concorde Music Black features a Nude Shibata stylus on Aluminum cantilever offers an upgrade from the Concorde Music Bronze and can be upgraded with the Stylus Concorde Music Black LVB 250.Iconic DesignBuilding upon a rich legacy which began when we launched the original Concorde the Concorde Music holds a storied history as one of the most famous cartridges in the world of audio. Originally developed as a solution to the challenge of easy mounting on a tonearm without screws or wires the Concorde's unique design earned the Danish Industrial Design Award and became an icon in the audio industry.StylusThe Concorde Music Black featuring a Nude Shibata stylus on an Aluminum cantilever offers an upgrade from the Concorde Music Bronze. The shape of the Shibata distinguishes itself by having a narrow and long contact surface. The Shibata is very close to the original cutting stylus which ensures the most accurate reproduction low distortion and extended frequency range.Rubber SuspensionA crucially important and vital part of a phono cartridge overall performance is the stylus rubber suspension. Exclusive Ortofon rubber compounds are used for the stylus suspensions in the Concorde Music Blue carefully produced at the inhouse rubber production and developed by the research and engineering team at Ortofon for brilliant performance.Coil SystemThe Concorde Music features Ortofon's quad-coil generating system with four split pole pins. Silver-plated oxygen-free copper is chosen for the quad-coil system along with four Ortofon split pole pins. This results in exceptional channel balance and separation delivering precise and dynamic sound. With a 6 mV output it offers lifelike sound with exceptional clarity and fidelity capturing every detail.Compatibilit

Stylus 20 Replacement StylusWhat's in the Box:Stylus 20 Replacement StylusSpecificationsFrequency range: 20 - 27000HzFrequency response: 20 - 20000Hz 2/-3dBCompliance dynamic lateral: 25μm/mNTracking ability at 315Hz at recommended tracking force: 80 μmStylus type: Nude EllipticalStylus tip radius: r/R 8/18μmEquivalent stylus tip mass: 0.4mgTracking force range: 1.25 - 1.75g (12 - 17.5mN)Tracking force recommended: 1.5g (15mN)Tracking angle: 20°Recommended for the following cartridgeSuper OM 20OM 20OMP 20OMB 20LM 20Concorde 20LM 20HTM 20UTM 20H

The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: H