Step Into the MusicThe 2M Premounted is for customers who wish direct and easy mounting and replacement on their S-shaped tonearm.  With the 2M Red you will hear the music come to life on its own terms. It is like taking a step into the music itself. This is Ortofon’s entry-level cartridge in the series but what an entry.FeaturesOpen Dynamic SoundSplit Pole Pin TechnologyOptimized Sound ReproductionAccuracy levelWith the 2M Red you will hear the music come to life on its own terms. It is like taking a step into the music itself. This is Ortofon’s entry-level cartridge in the series but what an entry. The 2M Red delivers an open dynamic sound with a slight touch of warmth.CompatibilityThe 2M Premounted is for customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The SH-4 headshell's resilience and stability are enhanced by its slender and refined design. A robust yet lightweight construction coupled with an ergonomic extended finger lift ensures easy handling and pickup.Split Pole Pin TechnologyThe 2M Red features Ortofon’s very own invention: the split pole pins with a copper wire that gives you a sound reproduction so precise only your heart dares skip a beat.SH-4 HeadshellThe 2M is mounted on a classic Ortofon SH-4 headsheel and is for customers who wish direct and easy mounting and replacement on their S-shaped tonearm.OutputThe engine provides an increased output of 5.5 mV optimized sound reproduction and a high level of sonic accuracy. What's in the Box2M Red Premounted MM Phono CartridgeSpecificationsChannel balance at 1 kHz: 1.5 dBOutput voltage at 1 kHz 5cm/sec: 5.5 mVChannel seperation at 1 kHz: 22 dBChannel seperation at 15 kHz: 15 dBFrequency response 20 Hz - 20 kHz: + 3 / - 1 dBTracking ability at 315Hz at recommended tracking force: 70 µmCompliance dynamic lateral: 20 µm/mNStylus type: EllipticalStylus tip radius: r/R 8/18 µmTracking force range: 1.6-2.0 g (16-20 mN)Tra

2M HiFi Phono Cartridge With Elliptical Diamond StylusThe 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Ortofon's philosophy is to play the record sound as accurate as possible without coloring the sound.The name 2M was selected from several ideas. Ortofon wanted a modern name that would be easy to pronounce and remember and therefore an alphanumerical name was chosen. 2M means MM which is the abbreviation for moving magnet. The 2M series of cartridges features Ortofon’s trademark split pole pins an invention that enables moving magnet cartridges to have a flat frequency response as with a moving coil cartridge. Split pole pins were invented by Ortofon and were originally presented in the 500 series and Super OM series.  We have optimized the design for ease of mounting the cartridge and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps. 2M Red Series Features:an improved engine which provides an increased output of 5.5mVa tipped Elliptical diamond and split pole pins with a copper wireWhat's In The Box:1 x Stylus brush1 x Screwdriver2 x Screw M25 x 52 x Screw M25 x 7Specifications:Output voltage at 1000 Hz 5cm/sec: 55 mVChannel balance at 1kHz: 15 dBChannel separation at 1 kHz: 22 dBChannel separation at 15 kHz: 15 dBFrequency range at - 3 dB: 20-22.000 HzFrequency response: 20-20.000 + 3 / - 1 dBTracking ability at 315Hz at recommended tracking force: 70 micrometersCompliance dynamic lateral: 20 micrometers/mNStylus type: EllipticalStylus tip radius: r/R 8/18 micrometersTracking force range: 16-20g (16-20 mN)Tracking force recommended: 18 g (18 mN)Tracking angle: 20 degreesInternal impedance DC resistance: 13 kOhmInternal inductance: 700 mHRecommended load resistance: 47 kOhmRecommended load capacitance: 150-30

Keep vinyl LPs free from annoying static, microscopic dust, and harmful debris with AudioQuest’s Silver Anti-Static Record Brush. Simple, attractive, and remarkably effective, AudioQuest’s Silver Anti-Static Record Brush features 1,086,000 conductive carbon fibers and an uncoated metal finger grip to create a reliable electrical path between fibers and handle. Unlike most brushes that have a protective coating over their handles, AudioQuest’s Silver Anti-Static Record Brush employs an uncoated metal finger grip that has been carefully positioned for ease of use and efficacy, ensuring a proper electrical connection to the user’s hand. That electrical path from fibers to hand is key to the Silver Anti-Static Record Brush’s success: Upon gripping the handle and gently applying the brush’s bristles to the surface of an LP, the user essentially becomes the ground for static electricity. Like its sibling, AudioQuest’s Gold Anti-Static Record Brush, which boasts even more (1,248,000) conductive carbon fibers, the Silver Anti-Static Record Brush is a direct descendant of AudioQuest’s tried-and-TRUE Carbon Fiber Record Brush. Dating back to 1982, AudioQuest’s Carbon Fiber Record Brush is a TRUE hi-fi classic, trusted for decades by audiophiles, vinyl enthusiasts, collectors, record-shop owners, DJs, and anyone else who cares about LPs. In creating the improved design, AudioQuest established new tooling for every part of the Anti-Static Record Brush. The revamped Anti-Static Record Brush has ideal conductivity from its carbon fibers through its internal parts to the ergonomically positioned conductive contacts. AudioQuest also reinvestigated the performance potential of carbon fiber bristles, thoughtfully selecting a far greater quantity of smaller bristles to sweep away microscopic dust and debris — not just the less relevant visible dust — more effectively. Building and maintaining a record collection doesn’t have to be a daunting or tedious task. The AudioQuest Silver Anti-Static Record Brush makes it easy: Simply place a record on your turntable’s platter, start the turntable, and wait until the record is spinning at its proper speed (33, 45, or 78RPMs). Holding the Anti-Static Record Brush by its silver finger grips, place its fibers across the grooves — firmly enough that the bristles make constant contact with the record’s surface and gently enough that the bristles do not bend. Allow the record to turn for two or three rotations so that the Anti-Static Record Brush can collect the visible dust and any invisible microscopic dust. Gently and smoothly slide the brush away from the platter’s center spindle, toward your body, and off the record’s surface. Rotate the Anti-Static Record Brush within its handle to remove any dirt and debris from its carbon fiber bristles. Repeat the process as desired. Cleaning your records before and after each listening session helps keep them free from dust and debris while eliminating static that can contribute to annoying snaps, crackles, and pops. This safe and simple record-cleaning process also benefits your phono cartridge’s stylus, enhancing its performance and extending its lifespan by ensuring that it travels a smoother, cleaner path through the vinyl’s grooves. Make the AudioQuest Silver Anti-Static Record Brush an important part of your vinyl-care routine and join tens of thousands who have trusted AudioQuest with keeping their valuable collections clean, quiet, and static-free.