Customer Ratings & Reviews

This product is amazing overall. The grip is nice on my fingers, and, unlike the competing product, it feels nice being a rubber-like material rather than plastic. On top of that, the built in slim kickstand is such a joy to use, being able to use it in almost any angle. My only complaint is the fact that I can't easily use one finger with the product to hold my phone. Other than that, I love this grip.

Very pleased with the quality of the grip. It offers a surprisingly strong and robust hinge capable of holding up a phone at steep angles without folding flat. Taking the popsocket out is a little less convenient but not too difficult. It comes out a good distance and provides plenty of room for your fingers to hold on to without feeling uncomfortable. The actual popsocket will be mostly metal but the finger grip portion is plastic. The paint on this portion is a bit weak and can be prone to scratches compared to the metal portion. Overall, I would definitely recommend this over other competitors. It offers a much stronger magnet and folding stand that makes it significantly more convenient and robust to use.

This is the best phone grip I have bought. It's magsafe compatible, has a stand built in for vertical and horizontal, and it sticks to metal spaces too. I have previously owned the OhSnap grip, and the OhSnap Grip Stand, the Grip was good but was impossible to take of the grip without breaking your case, the Grip Stand was ok but the magnets weren't strong and usually had to take off to charge via magsafe. I recommend going for this phone stand in case your in the market for one, definitely worth every dollar.

I love the PopSocket Low-Pro! It has a really nice feel on the inside when holding in my opinion, and unlike the Oh Snap! grip you can open it from any direction! The Kickstand is compact, very sturdy and has just the right amount of tension. It works perfect with my Z fold 8! Only negative I will say is that sometimes the magnet can be a little too strong on the backside, depending on the magsafe accessory.

This product works as advertised. Really thin and don't even notice it in your pocket while using it. Stand is awesome- allows for landscape and portrait mode on foldable- feels really solid. Would like to see a V2 that allows for magsafe charge through. Would also be good if you could customize with different covers like you can on a regular pop socket.

Loved the orange one so much, I bought the Navy color. next I'll get the blue. I just love the grips Popsockets make. Great company with amazing products. Thanks for this color!!

It’s super slim which is a plus but it takes a while to learn how to use it properly. I believe there’s better ones in the market that are also cheaper. There’s no way this should be this expensive.

The new Pop Socket Ultra Thin stand and grip has been a nice new accessory that has many nice features with only a few quirks. The first thing you will notice is that the Pop Socket ultra thin grip feels like it is very high quality. The folding stand ring is very tight and will not buckle under the weight of your phone. It will keep your phone up at any angle and not fold over accidentally. You can stand the phone up horizontally or vertically. In fact, it is so strong, that it can be a challenge to unfold it if you have very short fingernails like I do. But once you open it, it will stay in whatever position you want. The pop out grip is kind of dicey. You can slide it in order to get it to pop out, or you can try to pry it. Once it is out, it is very comfortable in your hand. The only issue is that the middle peice that folds out is very thin. I know this is the idea, but it does not feel very sturdy in your fingers. Especially if you have a heavy phone. My main phone is a Galaxy Ultra with a heavy mag-bak case, and the grip does not feel secure when you hold it. My secondary phone is an iPhone 14, which is smaller and way lighter, and it feels totally fine. I am just not sure this is for everyone. When folded away flat, the grip is very thin. I like this since it does not get snagged on my jean pockets. Your phone can even wirelessly charge with the grip folded flat, however it takes about twice as long to charge your phone and gets very hot. I would not recommend using it while your phone wirelessly charges on a summer day in your car. Overall, I do like the Pop Socket ultra thin grip, but I can't picture myself using it every day. I will continue to use my Pop Socket Kick Back stand which feels so much better in my hand. But if you have a lighter phone and like the super thin look and feel, give this Pop Socket a try.

This is an extremely thin PopSocket. I tried it out shortly but I will say I think this is suited more for people with thinner fingers as I personally couldn't get comfortable with it. So I gave it to my wife who has longer, thinner fingers than me and she absolutely loves it. She said now that she has it she can't live without it. She loves how thin and noninvasive it is on the back of the phone. The magnet is strong and still allows you to attach to other magsafe products, however one issue we are running into is wireless charging does not seem to be as effective, or existent really at all. I am pairing this with a DBrand ghost case so it could be the case interfering. It adds practically no additional weight. My wife notes she likes how flexible it is and the texture used, she states how gives her much better grip. She also likes that when she isn't using it, you can't even tell it's there and how it doesn't get in the way of using the phone as is. The kickstand is nice too, she uses it to stand her phone up when listening to music. Now as a larger male the only thing I'd recommend is to make one that can stretch further out and to extend a little more for my thicker fingers. Other than that, this is a really impressive PopSocket and it has been very beneficial to my wives every day use.

To be completely honest, I have never used a Pop Socket on my phone before this one. I never really saw the allure or need, and, to take it further, I kind of looked odd at those who did. Well…I guess what they say is true: ignorance is bliss (sort of), or maybe, don’t judge a book by its cover. I really like this thing. Perhaps these have always been great, or maybe this model is just that good. Regardless, it has been working for me. Admittedly, I am holding my phone slightly differently which is taking some time to get used to, but it is very comfortable to use and feels very secure in my hand. Which, really, is the goal. I do feel kind of foolish for never trying one sooner. The compact, simple, and small stand is just another bonus and a great add. It works well, in all orientations, and eliminates any friction when either watching or creating content on the go or whenever I need to be hands free. Beyond all of that though, the biggest thing for me is how slim and out of the way it is. It is so thin it really almost does not seem there. I think that was the main reason I never gave one a try. I didn’t want the bulk. The MagSafe application is another ease-of-use thing that I really appreciate. No adhesives, easy off and on (but still sturdy), AND allows for charging as well as very versatile mounting options. Lastly, while quite affordable, it is well-built and I think they made some good materials choices. It is nice to see. I will have to keep an eye on it, but I suspect it will hold up over time, even with my phone in my hand admittedly more than I would like. In the end, even though I had my doubts going in, it turns out I was the one missing out and should have been the one getting those odd looks I was giving. This is a solid product, does what it advertises, very well, and, most importantly to me, I think offers some real life improvements. I think for what you get, the cost, and given how much time we all spend on our phones, the value is definitely there here.

The modern smartphone has become an essential part of our lives, almost like another appendage. The PopSockets MagSafe Low-Pro simplifies handling your phone securely and provides a convenient stand, all while maintaining a sleek, unobtrusive design. With its minimalist appearance, I barely notice it until I need it. The Low-Pro really bares its name as it is so thin with the retractable grip so flush. Out of the package, it was ready to go as it snapped solidly to my MagSafe compatible phone cover. It doesn’t move an inch once installed and feels part of the phone cover. I’ve never had an issue sliding in and out of my pocket. Operating the PopSockets Low-Pro is truly easy. With a quick tug, the “Ultra-Thin” grip pops out without effort and snaps back with authority into its flush position. With the grip out, it provides a secure anchor and I no longer fear dropping my phone, which has happened a lot in the past. One thing I’ve noticed is that the grip feels a bit tight with my larger hands, and during extended sessions the tight squeeze becomes noticeable but it’s no deal breaker; better tight than too loose. The feature I use the most, especially at the office, is the multi-angle stand. No more looking for a separate stand, or improvising with a mug or a back wall, the ‘Ultra-Thin” stand is a true revelation. Whether you want your phone to stand horizontally or vertically, it maintains the set angle perfectly without worry that it would move. I found it to be 100% reliable every time I used it. I’ve also noticed that I don’t need to remove it with the Magsafe car mount in my vehicle which is another plus. As for charging to a MagSafe pad or stand, it has to be removed which is to be expected. In conclusion, The PopSocket Ultra-Low is a real winner. It resolves the main complaint of traditional grips with its low unobtrusive profile while tightly hugging the phone cover and providing a stable reliable stand and a secure grip that effortlessly pops in and out. With its sleek look and great quality build, I’d recommend it to everybody with a MagSafe phone holder.

The Popsocket MagSafe Low-Pro Ultra-Thin Universal Magnetic Grip with Adapter Ring is an accessory I had never tried before. I had my doubts to be completely honest. But upon unboxing and installing it on my iPhone 17 Air, which took mere seconds to do I might add, I'm thoroughly convinced. This is a quality accessory with purpose. It would be a big understatement to say that the Popsocket MagSafe Low-Pro Ultra-Thin is weakling. This thing has an array of 'serious business' magnets in place. The magnetic holding force is quite frankly insane! Popsocket included a integrated, solid ring to make removing the Low-Pro Ultra-Thin grip easy peasy and it also functions as a prop/stand. In terms of the collapsible grip-disc, it's way to early to say how well it will hold up to daily use but from the looks of it - it's an ingenious design and the low-profile, ultra-thin description is no lie. Fully retracted, this grip widget is insanely thin. Regarding comfort, the grip retractable legs naturally flex to provide a confident placement on the hand. Not sure what else to add here; this thing is everything they say it is (early on..) and nothing that I expected. If you want something that isn't cheap feeling and works with total confidence - buy one of these! It's staying on my iPhone 17 Air!

I currently have a Google Pixel phone with a magsafe case. I currently use a magnetic ring on the back for additional stability. I used to use Pop Sockets a few years back. I saw this low-profile version with MagSafe and It looked slimmer, so I had to try it. I could immediately tell when I opened the shipping package that just seeing it in it’s native packaging that it was significantly thinner than my current ring. It’s very light in your hand and it has a large very thin ring that also opens up to give you a similar feel as the ring that I had. The best part is the pop up pop socket just like your traditional Pop Socket. It fits very nicely between your forefinger and middle finger so that your thumb is correctly positioned to scroll. It’s very comfortable. My only concern is the material that fits between your fingers. It seems very well made and strong but time will tell. Right now, I have pulled my old ring off and am using this exclusively and am very happy. I would highly recommend this. It is lighter and thinner than the traditional ring

Highlights: * Ultra thin when stowed - thinner than most camera bumps * Thinner than nearest competitor * MagSafe charging through even when installed * Can hold from any angle * Sturdy metal ring to prop up in landscape or portrait * Easy to pop open * Auto-open upon removal from MagSafe charger/mount Considerations: * Charging through may not be as quick as direct MagSafe * Cannot rotate the metal ring’s hinge location after attachment * Auto-open upon removal from MagSafe charger/mount may not be desired The original and ubiquitous PopSocket is great for adding a bit of stability to holding your phone. Slide your fingers around the grip instead of gripping the sides of the phone seems more comfortable for many people. The version with MagSafe is even easier for phones that charge with MagSafe because you can magnetically snap it on when you need it and pop it off when you don’t. The only problem I’ve had with the original design is that it’s just too thick and the grip doesn’t sit flush when stowed so not only won’t my phone won’t fit in a pocket unless I took off the original PopSocket, but if I left it on, it would catch on my pocket on the way in. Enter the PopSocket ultra-thin! This has all of the great features of the original but is so thin that your camera’s bump will probably be thicker. That and the grip is completely flush when closed. No more complaints about sliding it into a pocket. Snap it on your MagSafe-compatible phone or phone’s MagSafe-compatible case. It’s ready when you need it and nearly invisible when you don’t. The part that pops out magnetically stays closed until you need it. Slide the center to any side to pop it open and then ease your fingers around it like the original. The cool thing is that your phone can still charge via MagSafe through this, although depending on the thickness of your case, it might slow things down a bit versus “naked” charging. Pull your phone (with this grip mounted) off a MagSafe charger or mount and the socket tends to pop open and is ready for your fingers. Around the circumference is a metal ring with a tight hinge. Stored flat it looks like a piece of metal trim, but you can pull it out with the finger hold stowed flat and then you can prop your phone up in either portrait or landscape. It probably goes without saying that this metal ring needs to be stored flat against the phone for all other uses of the grip or the MagSafe feature. Note also that the grip cannot easily be rotated once snapped onto your phone (or case), so best to pay attention to the orientation of the hinge if you plan on using it to prop your phone up. Otherwise you’ll have to pop the grip off and reposition it first. This grip is magnetic on the outside as well, so you can snap it onto your phone or case via MagSafe and then it can hold your phone to something metallic like a fridge. However, as mentioned, this grip is so thin that your camera’s bump probably sticks out further than this grip so your phone probably won’t hold onto a metal wall or item very well without the bump preventing it from resting flush. Trade-offs for thinness, right? For phones that don’t have MagSafe, there is a metal ring in the box that you can stick onto the back of your phone. Not quite as good as natural MagSafe but it works and you can still take advantage of this super thin grip. I also have a competitor’s similar product and while theirs is a tad smaller in diameter, this PopSocket is a bit thinner and the metal ring is a more secure way to prop your phone up. I haven’t seen any decorative parts for this one yet, but the disc that pops up is flat so I assume that stickers or other similar decorations will be available soon. If not, you can probably find something fun to stick onto it. This PopSocket grip is a super convenient way to add PopSocket security and convenience to your MagSafe-compatible phone while adding almost no measurable thickness. How can you go wrong?

📦 UNBOXING: Inside the packaging, you’ll find the Popsockets MagSafe Low-Pro and some basic regulatory documentation. There really isn’t much to it. 💪 BUILD: At its flattest point, the Low-Pro manages to be a mere 2.6mm thin, making it very competitive with other low-profile phone grips on the market. The magnets appear to be quite strong, so you won’t have to worry about it sliding off, and it’s easy to magnetically snap on and off your MagSafe compatible phone or case. While the build is primarily plastic, the kickstand is a simple aluminum ring on the outer diameter with a sturdy hinge to fold. To use it as a grip, simply slide a fingernail under the inner ring and pull up. Despite how thin it is, I had no issue opening the grip, with or without fingernails. ✅ PROS: • Low-profile at a mere 2.6mm thick. • Easy to attach and remove. • No adhesive so it can be easily transferred to different devices. • The aluminum kickstand is sturdy. • Stand can be used horizontally or vertically. • Can hold most phones upright at a 90 degree angle, great for taking group photos. ❎ CONS: • Increased radius from the aluminum kickstand may prevent the Low-Pro from fitting on cases with thicker camera covers. • Requires two fingers to hold, while some competitors only require a single finger. • The grip doesn’t spin, so it won’t be good for fidgeting. • No adapter included for cases without MagSafe. 🧐 CONCLUSION: Overall, I really like it, and none of its cons were deal breakers for my use-cases. Many integrated phone grip stands have less usable angles for group photos, but the Popsockets Low-Pro does a great job at being both a phone grip and stand without adding additional bulk.

The Popsocket MagSafe Low-Pro Ultra-Thin Universal Magnetic Grip with Adapter Ring for Cell Phones, herein after referred to as the Popsocket MagSafe, is in a word, handy! It is simple, easy to use and the only problem is with my physical handicaps it can be difficult to get the fingers of my left hand under the PopUp handle but that is easily remedied and to be honest, once my fingers are there they're not coming out very easy! The PopUp makes holding onto my iPhone much more secure and to date I haven't dropped my phone when using the phone as a phone! And that's even if I take a small tumble! It attaches as the name implies magnetically and the popup socket is actually lifted up gently by your fingers. There is also a handy hinged metal ring which you can use to place your phone at a tilt on a flat surface for doing a Face-Time call, watching a video (not something I care to do) and listening to music (something I do enjoy!). All in all the Popsocket Magsafe is genius made conveniently simple and easy to use. Highly recommended? Indeed! So then, 5 STARS for doing exactly what it is designed to do. Make keeping a hold on your sell phone easier and a bit more secure!

I only recently got into the whole Magsafe craze, first with a magsafe case and chargers, then a magnetic hands-free mount for my truck. It has grown on me as a very practical feature over the last few months. I personally like my phone case to be as slim as possible, while still offering good protection, so adding anything to it that would make it bulkier is not desirable. This particular Popsocket Magsafe Low-Pro Ultra-Thin is as the title says very thin, so it meets my requirement to not add too much bulk to my case. Moreover, it’s removable, so I don’t have to have it on my phone at all times. I was debating getting a case with a built-in kick-stand, but those are usually fairly bulky. This Popsocket transforms into a kick-stand and because it magnetically attaches to your phone, it can easily be rotated, so I can use my phone in both portrait mode and landscape. So I can have a hands-free video chat or watch a show in the background, while working on my computer. The metal ring and magnet is very strong, while light weight and the pop-up grip is thin and comfortable. This particular model is on the expensive side, but if you can afford it and buy it on sale, you won’t regret it.

I'm one of those crazy people who likes to use their phone without a case because I love the material and look of the bare device. I know PopSockets are super popular, but having never used one before, this specific grip caught my attention for three reasons. 1) SUPER THIN AND LOW PROFILE: It is shockingly thin—less than the camera bump on my iPhone 17 Pro. As in, equal to the bump before you get to the lens thin. As the lens protrude past it. This creates some problems that I’ll list below. This is good because I barely notice it is there and it never comes off when slipping it into my pocket. It’s bad because it’s so thin it doesn't provide any table protection, so I still get the camera bump wobble… it is just less pronounced now. Next, at first, due to the thinness I had a hard time getting my fingers to fit. But this has loosened up a lot since that time and now that is no longer a problem. But does make me wonder if it will just eventually rip seeing as it is plastic. However, in the meantime, I can now reach everything on my screen with just one hand while keeping my phone securely in my hand. Last, deploying the "pop" is easy: just catch it with a fingernail, slide, and it pops out. A simple press returns it to its low profile. 2) MAGSAFE CONNECTIVITY: It attaches to the back of my phone just like any other MagSafe accessory, meaning easy on and easy off. The magnet is strong and takes intention to remove. I also love that it allows pass-through, so I can attach my phone to other MagSafe mounts while the grip is still on (which rarely is the case). However, there's a catch: the pass-through magnet is stronger than the phone attachment. When pulling my phone off a mount, the PopSocket stays behind, and its low-profile design makes it hard to pry off the mount. Additionally, while it claims to attach to flat metal surfaces, since the grip doesn't extend past the camera bump (for my phone), this means it won't mount flush on metal surfaces (due to being off center ruining the magnetic pull) unless you position it so the camera bump hangs off the edge. At which point it works brilliantly. 3) BUILT-IN KICKSTAND: The metal ring around the edge doubles as a kickstand. The hinge is tight, meaning it easily holds the phone up in both portrait and landscape modes, adding a ton of versatility. As you can adjust the angle to be pretty much whatever you want. Having my phone propped up on my desk makes it incredibly convenient to check notifications as I can just look over or quickly tap to see the time. It also improves speaker audio in portrait mode and makes interacting with what I'm reading much easier. Especially, if you’re a student who uses their phone for the textbook or similar. This might be my favorite feature—it gives me the utility of a kickstand without altering the bare feel of my phone. *A QUICK NOTE ON CASES: Even though I prefer going caseless, I did test this with a case on. Interestingly, almost every negative I mentioned above vanishes. The camera wobble is gone and it mounts flush to metal surfaces perfectly. The only issue that remains is the grip staying stuck to other mounts when you pull your phone away. Overall, this is a worthy upgrade. It elevates the phone’s usability without interfering with the aspects I like most about carrying it case-free. Easy recommendation from me. I gave it 4/5 stars simply because without a case it doesn't work perfectly (granted most users have cases). Also, it staying behind on other MagSafe accessories is annoying. However, I would prefer a stronger magnet where it will stick to a metal surface (say a fridge) or the MagSafe accessory vs the magnet being generally weak and not having those problems. Granted the in-between of that is the "goldilocks" zone.

The PopSockets MagSafe Low-Profile Ultra-Thin Universal Magnetic Grip is one of those accessories that seems like a simple variant of a classic product on paper but ends up being a nice evolution from the classic design. I have used classic PopSockets on my cellphones for years, but this version feels much more refined thanks to its slim profile and magnetic design. The first thing that stands out is just how thin it is. Unlike traditional phone grips that add noticeable bulk, this one sits nearly flush against the back of the phone when collapsed. Installation is about as easy as it gets: simply place it on the back of a MagSafe-compatible phone or case and it snaps firmly into place. Despite being easy to remove when needed, I never felt concerned that it would accidentally detach during normal use. The grip itself works exactly as you would expect from a PopSocket. With a quick pull, it expands into a comfortable finger grip that makes holding larger phones much easier and more secure. I found this especially helpful when using my phone one-handed for extended periods of time. One minor tradeoff of the thin design is that the grip mechanism’s structure makes it less rigid compared to traditional PopSockets, which means the phone will droop in some PopSocket mounts. One feature I ended up using more than expected is the integrated metal adapter ring. It rotates smoothly and can be positioned at virtually any angle, making it useful both as a grip and as a kickstand. The hinge for the metal ring is stiff and the ring stays in position firmly at any angle. It has a nice long reach, so even my large phone can stand nearly upright in portrait mode. Another nice surprise is that wireless charging still worked through the PopSocket, so I did not have to constantly remove it when placing my phone on a wireless charger. This was a nice upgrade compared to my classic PopSocket. Overall, this thin, magnetic variant of the PopSocket strikes an excellent balance between functionality and minimalism. The slim design, strong magnetic attachment, adjustable kickstand, and support for wireless charging make it an easy recommendation for anyone looking to improve the ergonomics of their phone without adding unnecessary bulk.

This Pop Socket is designed to be super light and low profile while offering mag safe compatibility for both holding and charging. It also adds a kickstand which is useful if you want to set your phone down and tilt it for easy viewing. This Pop Socket does work very well my only major complaint is that the pop socket is soooo thin, it is like plastic/rubber mesh and I'm not really sure how durable this will be over time. It feels like too much of a tug could easily tear it right off. I have used Pop Sockets in the past and many do prefer them for that ability to have more stability and control while doom scrolling their social media feeds. I only use it when I am actively shooting videos or movies in areas where dropping my phone could be disastrous, like near water or heights. Otherwise I feel like they can be a bit bulky, but this new version is not so, you can keep it connected all the time especially if you don't have a case it works great and keeps the super thin profile of the phone. I used it with an iPhone 15 Pro Max with no problems at all charging or holding on a Mag Safe ring, charger or car mount.