Customer Ratings & Reviews

There pretty sturdy and light ! Not bad at all a sure fit for safety and piece of mind

As a somewhat nervous first time drone pilot, this seemed like an accessory that I might really benefit from. I have since decided I don't need these and they add complexity to what I do with my drone that I simply don't need or want. They snap onto the drone and protect the propellers from hitting things. The other way to protect the propellers is to avoid flying the drone into things. I haven't flown much in windy conditions and may change my mind if that turns out to be a problem, but I am not using these guards at this point. I suppose if you are flying in areas with lots of obstacles or indoors, these might be more critical. Clipping the guards onto the drone is straight forward. It is a little bit awkward getting the guard in place and fastening the clip the first time, but not too difficult. The clips snap into locked position and sometimes you have to squeeze really hard to get them to latch, but again, it is doable. One problem I have is that you cannot fold the drone up and pack it away with the guards on. You have to take them on and off every time you are going to fold up or unfold the drone arms. Folded up, the drone is then quite compact and easily ported in a small case, but the guards are large awkward fragile plastic pieces and still have to be transported. I find it easier just to not use them.

Perfect fit, very effective at keeping my drone safe from collisions

The guards protect the propeller properly and snug. Keep me from hitting a few branches. It is sturdy and takes light impact.

it is good for indoor environment, but it would be impact endurance.

Bought this for my Dji mini 2. Flew drone indoors and ran into some walls to test. Protected the propellers perfectly. Drones flight was not affected at all.

Unlike several reviews and answers in the Q&A, I found that these propeller guards did not fit the new DJI Mini-2 (US Version) very well; it was too tight of a fit that I thought I would break either the drone or the locking mechanism of the guards. DJI does specify that the guards do fit the Japanese version, but the US version does appear to have slightly thicker arms. From what I can determine from my research, the propeller guards that are made specifically for the Mini-2 are slightly heavier (about 0.5 gram per guard), so obviously there is something different; the model number for them is CP.MA.00000327.01. I am returning these guards and getting the ones specifically for the Mini-2; I do not want to break either the drone or the guards. That said, the propeller guards are built well and appear to do what they need to do, on a DJI Maveric Mini. I would definitely have recommended this product had I had the older Maveric Mini drone; I would not recommend it for the Mini-2 (US version). My three stars (vs 5) is based upon the compatibility factor with the Mini-2 (US Version).

Overall a good peace of mind purchase. So far they haven’t been super needed, but would rather have them than not in case of bumping into tree limbs or the like. A word of warning for operators: While they may be fairly light to a person, their additional weight will end up causing the drone to use more power to compensate, reducing battery life.

Great protection for the DJI MINI 2 propeller, you can fly the DJI Mini 2 inside you house and worry about it getting damage

Very easy to install and use. Safe for guarding propellers from getting damaged. Would recommend to others to purchase.

These have been great. I do a lot of drone video for my company and when I fly within a building, these give that extra layer of protection for the drone and the building finishes. A little bulkier than I would like, but overall, a great purchase.

I absolutely love everything about DJI. Needless to say I will say the same about this product. It works well. The only downfall is I wish it was collapsible as is will not fit in my mini travel bag.

I purchased these guards when I got the drone. I am so glad I did. It takes a little practice to negotiate the drone and these really keep the propellers from getting damaged.

My drone had a terrible landing and hit to the ground and I Was lucky to have it before flew my drone. No much damage caused.

Propeller guides are good for beginners but add extra weight And limit run time on the battery by about nine minutes

A must have for the mini 2. Ofcourse it flys great without it but if you fly indoors it really helps near walls and such. Works so great it’s even used by SWAT.

works well indoors even outdoor. remember to set the setting to load. Good for beginners i bump the walls a lot.

Good attachment to protect your drone indoors. Recommend if you are flying in the house.

Fits great with my Mavic Mini 2, just like the description said

It’s really a great product which is helpful lots to protect my DJI mini2 drone ! Thanks