QIDI - Plus5 Enclosed CoreXY FDM 3D Printer, 65C Heated Chamber, 600mm/s, Auto Leveling, AI Camera, 320x320x300mm - Black
Reviews coming soon
About this product
The QIDI Plus5 is an enclosed CoreXY 3D printer built for makers and engineers who need engineering-grade materials without a production-scale footprint. Its 320 x 320 x 300 mm build volume is 18 percent larger than the previous generation in nearly the same machine footprint, while the third-generation independent chamber heater (550W, up to 65 degrees C) and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. A load cell sensor integrated into the hotend delivers hands-free automatic leveling and true zero-offset first layers, and the 3-in-1 air filtration system (G3 pre-filter, H12 HEPA, and coconut shell activated carbon) captures 99.5 percent of airborne particles for safe indoor use. The Plus5 adds an AI camera with failure detection and timelapse, dual-band 2.4 and 5 GHz Wi-Fi, a 500W silicone heated bed reaching 120 degrees C, and RGB status lighting. Compatible with the QIDI Box multi-material system for multi-color printing and soluble supports, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
Features
Massive Build Volume for Large-Scale 3D Printing
QIDI Plus5 3d Printer provide a 320×320×300mm build volume — 18% larger than Plus4 — this large 3D printer enables full-scale prototype printing, batch production of multiple parts in a single run, and oversized artistic models without splitting or scaling down; fewer print cycles, seamless assembly, and significantly higher workflow efficiency for engineers and makers
Effortless for Engineering-Grade Filaments
The QIDI Plus5 3D printers ware designed for high-performance materials including PPS-CF, PPA-CF, PC, and nylon etc, with a 370°C max extrusion temperature and an actively heated 65°C chamber; active chamber heating minimizes warping and maximizes layer adhesion, producing durable, heat-resistant functional parts ready for end-use applications and industrial-grade 3D printing tasks
CoreXY+ Precision Motion System with Active Toolhead Cooling
The QIDI Plus 5 3D printer is rigid CoreXY structure paired with X-axis linear guide rails and 9mm timing belts ensures stable, low-vibration high-speed 3D printing at up to 600mm/s and 20,000mm/s² acceleration; optional Polar Cooler actively cools the extruder to prevent heat-creep clogs inside the enclosed heated chamber, delivering both rapid prototyping speed and premium surface finish quality
Smart Print Management & Stable Overday 3D Printing
Equipped with automatic bed leveling, AI-powered camera monitoring, and remote control via mobile APP; during batch production, skip failed individual parts without pausing the entire plate — saving both time and filament; built-in multiple thermal sensors, flame-retardant enclosure, and 3-in-1 air filtration system ensure reliable, worry-free operation for long-duration and high-temperature printing sessions
Multi-Material & Multi-Color 3D Printing with Active Drying
Supports QIDI BOX (optional) for up to 16-color multi-material printing, featuring built-in active drying technology that continuously maintains low humidity inside the filament slots to prevent stringing, bubbles, and weakened layer adhesion caused by moisture; compatible with PLA, ABS, PETG, TPU, PA, PC, and carbon/glass-fiber composites, enabling strong, precise functional prototypes and vibrant full-color models with consistent extr
Specifications
- NetworkingWireless, WiredPrinter Type3D PrinterLeveling CapabilityFully automatic with load cell sensor
Reviews
This product doesn't have any reviews yet.
Compare similar products
The QIDI Plus5 is an enclosed CoreXY 3D printer built for makers and engineers who need engineering-grade materials without a production-scale footprint. Its 320 x 320 x 300 mm build volume is 18 percent larger than the previous generation in nearly the same machine footprint, while the third-generation independent chamber heater (550W, up to 65 degrees C) and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. A load cell sensor integrated into the hotend delivers hands-free automatic leveling and true zero-offset first layers, and the 3-in-1 air filtration system (G3 pre-filter, H12 HEPA, and coconut shell activated carbon) captures 99.5 percent of airborne particles for safe indoor use. The Plus5 adds an AI camera with failure detection and timelapse, dual-band 2.4 and 5 GHz Wi-Fi, a 500W silicone heated bed reaching 120 degrees C, and RGB status lighting. Compatible with the QIDI Box multi-material system for multi-color printing and soluble supports, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
The QIDI Plus5 Combo pairs the enclosed CoreXY Plus5 printer with the QIDI Box multi-material system for true multi-color and multi-material printing out of the box. The printer's 320 x 320 x 300 mm build volume, third-generation independent chamber heater (550W, up to 65 degrees C), and 370 degrees C bimetal hotend handle ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites with minimal warping. The included QIDI Box loads four spools, dries filament at up to 65 degrees C while printing, and switches materials automatically for multi-color models and dissolvable support structures; chain up to four units for 16 colors. Hardened steel dual gears feed abrasive composites reliably, and RFID recognition, run-out, tangle, and clog detection keep long prints unattended. A load cell sensor in the hotend delivers hands-free automatic leveling, the 1080P AI camera detects print failures, and the 3-in-1 filter (G3 pre-filter, H12 HEPA, coconut shell activated carbon) captures 99.5 percent of particles for safe indoor use. Dual-band Wi-Fi, Ethernet, and USB, with full QIDI Studio, OrcaSlicer, and PrusaSlicer support.
The QIDI Q2 Combo pairs the fully enclosed Q2 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 270 x 270 x 256 mm heated chamber works with a 370 degrees C bimetal hotend to print PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF, and carbon fiber composites with minimal warping, while the bundled QIDI Box dries filament at 65 degrees C and switches materials automatically for multi-color models and soluble support structures. Load-cell auto-leveling delivers true zero-offset first layers, the 1080P AI camera detects print failures automatically, and the 3-in-1 filtration system (G3 pre-filter, H12 HEPA, activated carbon) captures 99.5 percent of airborne particles for safe indoor operation. MET certified to US and Canadian safety standards.
Multi-Color Printing; Full-auto Calibration; Active Flow Rate Compensation; 256 x 256 x 256mm Print Size. Full-size build volume, fully automated calibration, multi-color printing with AMS lite, a perfect gateway to 3D printing.
| Pros for QIDI - Plus5 Enclosed CoreXY FDM 3D Printer, 65C Heated Chamber, 600mm/s, Auto Leveling, AI Camera, 320x320x300mm - Black | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | There were no pros for this product— | Ease of Use, Overall Performance, Print Quality, Setup, Noise Level |
| Cons for QIDI - Plus5 Enclosed CoreXY FDM 3D Printer, 65C Heated Chamber, 600mm/s, Auto Leveling, AI Camera, 320x320x300mm - Black | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Filament Handling |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore, Play, Collect Sponsored
Keep exploring
$459.00The price was $599.00
$1,299.00The price was $2,399.00
$359.00The price was $469.00
$459.00The price was $599.00
