Customer Ratings & Reviews

This was really simple to install. Most importantly it looks good. I bought this to hide the cord from the tv I recently mounted to the wall. Eventhough I anchored it to a stud and wouldn’t fall I didn’t want my toddler trying to go Tarzan when I wasn’t looking just to prove me to be a liar. Directions were both visual and informal. It came with a card stock to trace around once you use the stud finder to find the space that has no electrical or studs. Unless you don’t follow the directions there’s no way to ruin your walls. It’s clean and looks good. You will need to buy a jab saw and stud finder separately. You don’t need anything electric.

I have had an ugly wall channel to hide my cords for years. The sticky back always came off the wall and I always had to reattached which always ended up being crooked. Luckily I bought a new TV and decided to take the plunge on one of these kits. I consider myself a avid DIYer but was worried about what was behind my old plaster walls and if I could run cords thru them. Luckily I had plenty of space and this kit was an easy install. Make sure to use the brackets to draw out your cut-outs and first drill each corner with a drill bit. Next use a jigsaw to cut those lines and pull the piece of wall out from the hole. Run your cords down the wall (a fish tape is a big help with this) and make sure they can pull thru the brackets and openings on the faceplates. Once you do all that, connect everything up and voila! You have the nice clean TV setup that looks like it was installed like a pro! Before and after pictures attached

I am very happy with this in wall kit. If you’re handy with tools, you won’t have any issues with this install. Keep in mind, this does require you to cut into your drywall. It’s not by any means difficult, but it is a bit “scary” and you want to make sure you get it right otherwise you will have damaged your wall. Take your time and has the proper tools that this install calls for and you’ll be fine. For me, this install took about an hour. Most of the time was trying to get the wires fished through the wall. The online video by Legrand shows a VERY easy install with no insulation behind the drywall, which of course would make the wires go through incredibly easy. Depending on where you are installing this kit, you may run into insulation so keep that in mind. You absolutely WILL need a guide rod if you run into insulation and the kit does not come with that. Other than that small speed bump (has to go back to HD for a rod), the install went nice and smooth and looks incredibly clean with no wires visible. I am very happy with this kit and have ordered another for the master bedroom. I highly recommend this kit.

[Employee of bestbuy] Installation was super straight forward. Just make sure you have a drywall saw! Looks super clean and I love the cable management hole!

This product did exactly what I wanted it to do. Which was to provide the neat, professional look that I wanted for my home. Once my flat screen was mounted, the wires were neatly routed through the wall and the not visible from the front. Cables can be routed through this product, but make sure that they are UL rated for in wall use.

This item made for a super clean install of our new TV mounted to the wall. This is the second one we now have installed in the house. No exposed cables anywhere!

I bought this cable concealer kit to hide the wires hanging down from my wall-mounted TV, and it completely transformed the look of my bedroom.best thing to buy.

I was Leary but I’m glad I purchased it! It was easy for my electrician to install. No issues at all!

I bought a 43” Samsung Smart TV and was going to have it mounted on my bedroom wall above my dresser. I didn’t want the power and other cords hanging down the wall, so I looked for a concealment kit. Not realizing the limitations, I first bought a kit that just had 2 plastic boxes with brushes covering the holes to run the cords through. Unfortunately, I then learned that TV power cords are not rated to be run behind walls, unlike some other cables (so I returned that one). I needed a special in-wall power kit like this one that would be installed behind the TV and run a special power cord behind the wall and connect to the outlet down by the floor. I likely could have done it myself (the only special tool you really need is a drywall saw), but since I am a TotalTech member and was having a third-party mount my TV, the tech installed the power kit for me at no extra charge. The top box is completely hidden by the TV, and the 2nd is in line with the electrical outlet. I’m not thrilled by the look of the thick electrical cord that plugs from the kit box to the outlet, but at least it’s down by the floor where I won’t likely notice it once my dresser is in place. Do yourself a favor and buy this kit ahead of time (especially if you’re paying for installation and mount service). If you buy the wrong one, or none at all, the 3rd party installers will charge you approximately $130 for the only similar product they carry in their trucks. My photo shows the clean/sleek look of not having cords hanging down your wall. If you look through the center of the entertainment unit, you’ll see the bottom part of the 3rd party concealment kit that I had to purchase for the installation of my 65” TV. The bottom piece of the Legrand kit is 1/2 the size.

Love that I can’t see any of the obnoxious cords for my Tv. Pretty easy to install but be aware you have to cut into your drywall

Easy install on an interior wall. No insulation to deal with to snake the wire down. Great quality you don’t have to deal with any wiring.

I love this item so much that I bought three of them this year! It is an awesome way to hide chords and audio wiring in the wall when you wall mount a TV. It also makes the cords very accessible as needed. If my wall mount another TV, I’ll be buying another one!

Best way to conceal your wires for a professional looking installation. Well, I had it professionally installed by Geek Squad. I thought I already review this. Apparently not. Keeping it simple so it won't get filtered. But overall, a nice way to hide those unsightly wires.

What can I say? The Sanus In-Wall Cable Concealer unfailingly, and safely hides the wire connection inside the wall without causing a possible wiring fire-hazard. Remember: Standard TV or speaker power-wires are not the same as Romex® cable or NM-B (Non-Metallic Sheathed) cable. This simple electrical addition should last many years. I really will not give this issue another thought.

I have a brand new home and I did not want to put my TV wire in the wall which is a fire code violation so I decided to purchase the in wall TV kit. I cannot believe how easy it was to install. My friends and family were amazed when I was able to install it by myself. I will be purchasing another one for my living room TV. ** I had the cable company to move the cable outlet up behind the TV** No wires NOW!!!

I find the appearance of wires hanging from a wall-mounted television rather unsightly, so I purchased three concealment kits from Best Buy. These kits are of high quality and well-designed, proving ideal for the project. Best of all, the price was exceptionally reasonable.

Just like another review said, “this is a super easy install and the biggest challenge is the fear of cutting into your wall. Easy install and my system sits clean with no visible wires

no wires showing! just what I needed. t's perfect. I cant speak about the ease of install because it was professionally installed but it work as expected.

Honestly, It looks great however the manufacturer made a crucial mistake in the electrical box. After cut wall open and ready to connect the electrical box, cover was bigger than the box itself.. ended going to a different location and buy a new box..

Impressive way to not only hide wires but it’s really cool looking in the back.