Q: Will this work with the Sonos Playbar Wall Mount? In other words it looks like this protrudes slightly, and the Sonos mount is designed to lay flat against the wall.

A: Yes, it will work perfectly with the Sonos soundbar Wall Mount. I have this paired with my wall mounted Sonos soundbar.

Q: What are the dimensions of the visible piece? I have a new Samsung 2.1 channel sound bar and it is very thin. I don't want to see the outlet.

A: The dimensions of the visible piece are 2" x 5.5".

Q: Can this be used for the Sonos Arc sound bar?

A: Yes. The cords are a little tight but it works.

Q: what are the lengths of the power connect from the top module to the soundbar module and from the soundbar module to the bottom. I believe i see the total is 6 feet, but i need to know how far away from the soundbar module i can run to the bottom module

A: Apologies for the delayed response. Between the top and center is approximately 42 inches of wire and between the center and bottom is approximately 60 inches of wire. Hope this is what you were looking for!

Q: I have plaster and lathe walls which always complicated things. Will this work or is it only intended for use with drywall?

A: The product is designed to work with drywall. There is no reason you can't use it with plaster walls, however, you may end up with cracks in the plaster depending on how fragile it is.

Q: Do I need to buy a mount for the soundbar in addition to this kit?

A: Yes This kit is for rerouting power and signal cables behind the wall. You will still need to mount the sound bar on the wall.

Q: Is this product up to code

A: Yes the WMC801 is ETL listed by Intertek. It has been evaluated to UL 498 - Standard for Attachment Plugs and Receptacles. Follow the link below for confirmation of our listing. This product complies with Article 400 of the NEC which covers the use of Flexible Cords and Cables. Please reference 400.10(A)(11) for uses permitted; 400.10 Uses Permitted (A) Uses. Flexible cords and flexible cables shall be used only for the following (11) Between an existing outlet and an inlet, where the inlet provides power to an additional single receptacle outlet. The wiring interconnecting the inlet to the single receptacle outlet shall be a Chapter 3 wiring method. The inlet, receptacle outlet and Chapter 3 wiring method, including the flexible cord and fittings shall be a listed assembly specific for this application. https://www.intertek-etlsemko.com/portal/pls/cust_portal/cust_intr.itk_cust_file_download_doc?v$report_number=102161932CRT-001&v$project_number=G102658214&v$country=US&v$module=VRD&v$doc_type=ap

Q: Will Geek Squad install this kit for me along with tv and soundbar?

A: Yes , They installed and synced everything . Top notch