Shark - Odor Neutralizer Technology Vacuum Cartridges - Teal

Keep your upright vacuum running efficiently with this foam and felt filter replacement kit designed for routine maintenance and suction recovery. Compatible with Shark Navigator NV22 Series NV22C, NV22L, NV22LWM, NV22LC, NV22P, NV22S, NV22T, NV22Q, NV22W / Shark Navigator Deluxe UV400, UV400_26, Swivel Deluxe UV410, UV410_26 / Shark Navigator NV26, NV26Z, NV27, NV27GR, NV27PR, NV36, NV36A, NV36_26, NV36A_26, NV42, NV42_26; replacement for Shark XF22. The 4-piece set includes 2 foam circular filters, 1 felt circular filter, and 1 felt exhaust filter, and the vacuum uses all 4 filters at once to help capture dust and fine debris while supporting airflow. The circular foam and felt filters are washable and reusable: wash about every 30 days, replace after 3-4 washes, and replace the woven exhaust filter about every 6 months. Allow filters to dry completely before reinstalling and do not operate the vacuum with wet filters. Before purchase, confirm your original filter matches this style; if your original filter has a hole inside, this kit is not compatible. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

Restore suction and help improve indoor air quality with this vacuum filter kit compatible with Shark Navigator Lift-Away upright cleaners. The set includes 1 post-motor HEPA filter plus 1 pre-motor foam filter and 1 pre-motor felt filter to help capture fine dust and debris before it reaches the motor and to trap airborne particles after the motor. The HEPA filter uses H13-class filtration rated to retain 99.95% of particles down to 0.3 micron, helping reduce dust, pet dander, and other contaminants released back into your home. Foam and felt filters are located directly below the dust cup to help protect the motor and support consistent airflow; they are washable and reusable (allow filters to dry completely before reinstalling). Replacement parts may arrive in Retail or OEM packaging. Compatible with Shark models NV350 / NV350_26 / NV350A_26 / NV350E / NV350Q / NV350T / NV350W / NV350W_N / NV350WC / NV351 / NV351C / NV352 / NV352C / NV352CFS / NV352E / NV352Q / NV354 / NV354C / NV355 / NV355C / NV355CFS / NV356 / NV356e / NV356E / NV356K / NV356Q / NV357 / NV358 / NV360 / NV360_26 / NV360K / NV360NZ / NV361 / NV361BK / NV361PR / NV370 / NV370_26 / NV390 / NV391 / NV391C / UV440 / UV440CCO / UV440CCOFS / UV490 / UV490CCO / UV500 / UV500WM / UV540 / UV541 / UV541CCO / UV550 / XL UV550 / CU500 / CU510 / CU520 / ZU503AMZ; Replaces XFF350 / XHF350. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.

Keep your vacuum running at peak performance with this replacement filter kit designed to refresh airflow and help maintain strong suction as part of routine maintenance. The set includes 1 HEPA filter plus 2 foam and 2 felt pre-motor filters, made from high-strength, environmentally conscious materials, and designed to be washable and reusable when cleaned on schedule. Replacement for Shark part numbers XHF650 / XFF650; compatible with Shark APEX DuoClean and Powered Lift-Away upright vacuums including AX950, AX951, AX952, AZ1000, AZ1000W, AZ1001, AZ1002, AZ1002BRN, AZ1002C, AZ1002NP, AZ1003, AZ1003BRN, AZ1500WM, AZ1501, ZU881, ZU885, and compatible with Shark DuoClean NV831, NV835, NV830 series and Shark Rotator NV650 series NV650, NV650W, NV651, NV651Q, NV651QBL, NV651QFR, NV651QGN, NV651QMR, NV651QPR, NV651QR, NV652, plus NV750 series NV750W, NV751, NV752, NV750REF, NV752BRN, NV765. The HEPA filter features H12-class filtration that captures 99.97% of particles down to 0.3 micron, helping reduce fine dust and allergens in everyday cleaning. Cleaning guidance: clean filters every 1 - 2 months depending on use; wash foam and felt filters about every 3 months and air dry completely; rinse and air dry the HEPA filter about every year. Do not operate the vacuum with wet filters. Not compatible with Shark Rotator NV500, NV755, NV680, NV800 series Lift-Away models. Disclaimer: This is not an Original Equipment Manufacturer (OEM) product, HQRP branded product is a replacement. All brand names and logos are registered trademarks of their respective owners. Any use of the brand names or model designations for this product are made solely for purposes of demonstrating compatibility.