VEVOR - 8-Inch Dado Blade Set, 12 Precision Alloy Teeth, 5/8-Inch Arbor, Smooth Finish, Stackable Blades with Chippers and Shims - Orange

DEWALT ATOMIC 20V MAX 4-1/2-inch circular saw (tool only) pairs brushless power with jobsite portability. The brushless motor delivers extended runtime and can cut up to 369 linear feet of 3/4 in. OSB when used with a DCB205 battery (sold separately). A removable auxiliary handle and a 1-1/2 in. finger trigger let you choke up for added control, while the bevel gear enables cutting 2x material at 90 degrees. On-board blade key storage, a hang hook, a dust port and an electronic blade brake provide convenience, cleaner work, and faster stops for safer operation. Cordless design increases mobility; battery and charger are not included.

This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.

Engineered to be easy to use and to fit into any size workshop, the 20V 7-1/4” Sliding Miter Saw from Worx will have you making a wide variety of miter and bevel cuts in no time. The easy change blade system allows for fast but safe switch-outs between blades. The dust bag and dust extraction system significantly cuts down on the amount of dust you’ll have flying through your workshop and onto your worktable. And the 3600 rpm motor makes smooth, precise cuts. The molded grip on the cutting arm allows for even, comfortable pulls. And the precision-machined guide rails are easy to adjust and hold your lumber firmly in place. What sets this saw apart from other sliding miter saws is its portable table saw design with full-size capabilities. At only 21 lbs, it’s easy to set up and move to different parts of the workshop or even take with you to the job site, yet its sturdy aluminum base gives it the leverage you need for this kind of work. With a smaller arbor, the motor can spin the blade faster than it could a full-size blade, which puts less wear and tear on the tool. This makes it more efficient and will increase the life of this saw. And the smaller footprint means you can actually keep the saw out of the way when you’re not using it.