The ultra-portable and easy to handle Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor might be small, but it’s more than powerful enough to get the job done. With 6900 RPM of no-load speed, it’s able to spin the blade as fast as cordless circular saws that are much larger. The 4.5 in. blade only has a 3/8 in. arbor. That’s half the size of a traditional circular saw’s blade, and it allows the motor to push the blade to higher speeds. And the user benefits from having all that power in an easy to grip and easy to transport form factor. In fact, this compact circular saw weighs less than 4 lbs., so it’s much easier to maneuver and make tricky cuts with than a full-size circ saw. Speaking of cuts, this 4.5 in. circular saw was made to cut 2x4s and plywood. With a max cutting depth of 1.5 in., it slices right through. And 0-46 degree bevel cuts are as easy as setting the bevel-adjustment lever. This cordless circular saw is driven by a high-efficiency brushless motor. It doles out more power but uses less battery while doing so, which means you get more runtime on just one charge. This 20V circular saw has a comfortable grip as well, so you can put in the hours and not feel it as much in your hands afterward. This Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor is the more nimble version of the full-size cordless circular saw.

The Worx 20V 6-1/2” Circular Saw is the user-friendly circular saw. With enough power to tackle every common circ saw job (this is the same battery we use for our chainsaws and lawnmowers) and innovative functionality that produces better, straighter results. ExacTrack is the star of the show, which allows you to set up the saw right against your cutting board when you’re doing rip cuts. You don’t have to measure out where the cut is going to be, because you can see exactly what you’re cutting. That gives you greater accuracy, with fewer chances for mistakes. And at only 4.5 lbs., this saw is easier to control. Plus, there’s no cord to get tangled-up in. And you can always flip ExacTrack off and use this as a regular circular saw. There’s a switch in the back to toggle between modes. This saw comes with one 24T carbide-tipped wood cutting blade to get you started. The high-efficiency motor spins it at 3600 rpm. And the cutting depth is 2-5/32” @90° and 1-17/32” @45°. This saw does bevel cuts just fine, too, with a 0-50° capacity. The vacuum adapter lets you hook up your favorite shop vac so you can keep your project and workspace clean. And of course, we threw in a charger so you can keep your Power Share battery ready to go.

Small by design, still packed with power. The Worx MakerX Rotary Tool with Brushless Motor fits nicely in your hand. The variable speed control lets you pick just the right amount of juice for the job (5,000-35,000 rpm). And it’s fitted with the common collet size of 1/8”. It can work with all standard collet sizes, so it accepts the bits and accessories of all the major brands. Get the MakerX Rotary Tool and start engraving glass, wood, and metal. Cut off protruding bolts, grind rust off iron rails before painting, sand children’s toys, or polish a brass nameplate while it’s still mounted. The Worx MakerX Angle Grinder with Brushless Motor was specifically designed to be slim and easy to grip yet with more than enough power to cut thin sheet goods and aggressively carve out complex shapes and contours. Thanks to variable speed control (5,000-20,000 rpm) you have the flexibility to perform a number to tasks, like cutting pipes for wind chimes, making a wooden card holder, refurbishing the glass on those foggy headlights, cutting guttering or siding in place, and shaping copper sheets for ornamental pieces. The Worx MakerX Air Brush is the only 20V portable air brush on the market. There’s no need for an air compressor, it’s just your MakerX Air Brush and the Hub going where you go. With its 0.4 mm precision nozzle, it excels at fine, detailed jobs, like tiny crafts of all kinds. Its pressure rating is 14-18psi, the dual function trigger controls both the air flow and paint volume of its 7 L flow capacity.