This 20V Axis Reciprocating/Jig Saw 2-in-1 gives you a whole lot of tool(s) for the money. There’s no need to buy a separate reciprocating saw and jigsaw when you have an Axis. Worx engineers figured out that those two saws actually employ a similar motion to get their different jobs done, and designed a way to put that functionality into one tool. So you get the raw power of a reciprocating saw (3000/min of no-load speed) to tear down structures, but then the head folds down into the base to give you more balance to make those intricate cutouts that only a jigsaw can perform. Plus, there’s no cord to get in your way, so you’re free to move. And at only 4.2 lbs, you can work long hours without getting hand and arm fatigue. The jigsaw is made to cut through wood (2” cutting capacity), PVC pipe (2”), and steel plate (5/32”). While the reciprocating saw also cuts wood and PVC pipe at 2”, but steel pipe at 2”, too. And they both have a 0.75” stroke length. With a built-in dust blower, you’ll always see the shapes you’re cutting in jigsaw mode. And the safety lock-off switch prevents accidental starting. Get an innovative 20V Axis Reciprocating/Jig Saw 2-in-1 from Worx and get more done, with less strain on both your hands and your wallet.

The 20V 2-in-1 Axis Reciprocating/Jig Saw from Worx saves you time, money, and its compact design saves you from the ache in your hands and arms that typically come with using saws like these. At only 4.2 lbs, this tool is easy to control, which is essential for the complicated designs you expect to cut with a jigsaw. And its vibration-absorbing soft grip handle cuts down on much of the unpleasant motion that’s inherent in using a reciprocating saw. It runs at 3000 rpms with a 0.75” stroke length, which is enough to cut 2” into wood and PVC pipe and go 5/32” into steel plate as a jigsaw, and as a reciprocating saw it’ll cut 2” into wood, PVC, and steel pipe. The LED headlamp illuminates dark work areas. And the off switch locks into place to guard against accidental starts. The tool-free blade change system is easy to use and accepts all common reciprocating saw and jigsaw blades that you’ll find at any local hardware store. Don’t buy separate jig and reciprocating saws when the Axis was built from the ground up to accomplish the tasks of both in less time and with less strain on the user. This Axis comes with a 20V 1.5 Ah battery and 0.4A charger, which you can use with any tool in the Worx Power Share family. You save money in the long run when you can share batteries between the cordless tools in your collection.

The ultra-portable and easy to handle Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor might be small, but it’s more than powerful enough to get the job done. With 6900 RPM of no-load speed, it’s able to spin the blade as fast as cordless circular saws that are much larger. The 4.5 in. blade only has a 3/8 in. arbor. That’s half the size of a traditional circular saw’s blade, and it allows the motor to push the blade to higher speeds. And the user benefits from having all that power in an easy to grip and easy to transport form factor. In fact, this compact circular saw weighs less than 4 lbs., so it’s much easier to maneuver and make tricky cuts with than a full-size circ saw. Speaking of cuts, this 4.5 in. circular saw was made to cut 2x4s and plywood. With a max cutting depth of 1.5 in., it slices right through. And 0-46 degree bevel cuts are as easy as setting the bevel-adjustment lever. This cordless circular saw is driven by a high-efficiency brushless motor. It doles out more power but uses less battery while doing so, which means you get more runtime on just one charge. This 20V circular saw has a comfortable grip as well, so you can put in the hours and not feel it as much in your hands afterward. This Worx Nitro WX531L 20V Power Share WORXSAW 4.5 in. Cordless Compact Circular Saw with Brushless Motor is the more nimble version of the full-size cordless circular saw.