
Introducing the all-new second generation Switchdriver 2.0 2-in-1 Drill/Driver. The original 20V Switchdriver has been a top selling Worx tool for years, but this new NITRO version takes the Switchdriver to the next level. New features and improvements include a powerful brushless motor, that offers 25% more power, 50% greater run time, and 10% longer life of the tool. Also featuring a new intelligent design interface with a digital keypad that allows you to quickly change torque settings (1-9) and adjust work mode between drilling and driving. This new version is also lighter and offers 442 in-lbs. of torque compared to the original version with 256 in-lbs. of torque. The variable speed trigger offers complete control and easy starting and the 2-speed gearbox allows for more advanced drilling and driving applications like driving longer lag bolts and drilling wider holes. The slim, ergonomic design with GripZone micro-texture allows for optimum comfort and reduced user fatigue. The new version features the same ¼” dual rotating chuck that made the Switchdriver one of the most innovative and useful tools in the WORX product line. The 20V battery that powers this drill is the same battery that powers every lifestyle, outdoor power, and power tool in the Worx Power Share family. This drill is part of the Worx NITRO line of tools, a line of high-performance cordless tools that offer greater performance and run time than standard battery-operated tools, for users and applications that demand more from their tools.
Q: Is the drill driver part of a larger power tool family?
A: This drill is part of the Worx Power Share family.
Q: Can the drill driver be used for driving longer lag bolts?
A: This drill driver has a two-speed gearbox that allows for more advanced drilling and driving applications, such as driving longer lag bolts.
Q: What is the torque of the drill driver?
A: This new version of the drill offers 442 in-lbs. of torque.
Q: What is the maximum speed of the drill driver?
A: The maximum speed of the drill driver is 1700 revolutions per minute.
Q: Does the drill driver have a variable speed trigger?
A: The variable speed trigger offers complete control and easy starting.
Q: What type of battery does the drill driver use?
A: This cordless drill driver uses a 20-volt lithium battery.
Q: Does this driver/drill comes with a battery and charger included already?
A: Hello There! Thank you for your question. Yes, this tool will come with a battery and charger! Thank you for choosing Worx!
Q: Can I use to drill into concrete?
A: Hello Valued Customer, Thank you for your question. No, a standard Worx WX177L 20V cordless drill driver is not designed to drill through concrete. It's primarily intended for drilling in wood, metal, and plastic, as well as for driving and removing screws. For concrete, you would need a hammer drill with appropriate masonry drill bits. Thank you for choosing WORX!

Introducing the all-new second generation Switchdriver 2.0 2-in-1 Drill/Driver. The original 20V Switchdriver has been a top selling Worx tool for years, but this new NITRO version takes the Switchdriver to the next level. New features and improvements include a powerful brushless motor, that offers 25% more power, 50% greater run time, and 10% longer life of the tool. Also featuring a new intelligent design interface with a digital keypad that allows you to quickly change torque settings (1-9) and adjust work mode between drilling and driving. This new version is also lighter and offers 442 in-lbs. of torque compared to the original version with 256 in-lbs. of torque. The variable speed trigger offers complete control and easy starting and the 2-speed gearbox allows for more advanced drilling and driving applications like driving longer lag bolts and drilling wider holes. The slim, ergonomic design with GripZone micro-texture allows for optimum comfort and reduced user fatigue. The new version features the same ¼” dual rotating chuck that made the Switchdriver one of the most innovative and useful tools in the WORX product line. The 20V battery that powers this drill is the same battery that powers every lifestyle, outdoor power, and power tool in the Worx Power Share family. This drill is part of the Worx NITRO line of tools, a line of high-performance cordless tools that offer greater performance and run time than standard battery-operated tools, for users and applications that demand more from their tools.

The SD Driver with Screw Holder is for professionals or DIY-ers that have a lot of work to get done. Using a manual screwdriver can strain your hands pretty quickly, and everyone drops fasteners and bits on the ground. Eliminate those two problems with this semi-automatic driver and bit changer—with a screw holder built right in. You just press the orange button on the tip to get the jaws to accept the screw. Then with just one hand, you can maneuver into tight spaces and drill it home. The jaws work when you need to back screws out, too. Your six favorite bits are stored onboard, and you cycle between them by shifting the top piece back towards you. With 0-230 revs/min of no-load speed, you’ll have enough torque to handle the most common screwdriver applications. And the LED headlamp lets you see what you’re doing, even in the dark. The internal 4V battery will hold a charge for up to 18 months, so you can toss the SD Driver on a shelf and it’ll be ready to go the next time you pick it up. A charger comes with it, as does the reloadable bit cartridge, which is stocked with 6 of the most common bits already. Save your hands and stop losing bits and fasteners. Get screws into places you never thought possible before. The SD Driver with Screw Holder is a solution to a couple of problems that come with using a regular screwdriver. Luckily, you don’t have to worry about those anymore.

The most important tool in your collection is your hands, and to make sure they continue to operate at peak efficiency well into their life cycle, you should start using an automatic screwdriver. The powerful 4V Screwdriver from Worx provides 300 rpm of no-load speed for a max hard torque of 44 in-lbs, and a max soft torque of 22 in-lbs. Yet, this tool is only 1.5 lbs itself, feels great in the hands, and is easy to hold from multiple angles and in varied positions to get at tough to reach fasteners. Getting a manual screwdriver into a tight space isn’t usually the problem, but generating enough torque once you get it in there usually is. With this Worx automatic screwdriver, all you have to do to generate max torque is hold down a button. The 4V motor is as powerful as some drills, and you’ll get about 45 minutes of no-load working time on a single charge. But because you’re likely to use this tool in short bursts, it will effectively last much longer than 45 minutes. Plus, it charges back up in only an hour and a half. This model comes with a box full of bits. That’s the other advantage of auto screwdrivers: you just need one and a few bits, instead of a dozen separate tools. This tool is covered by a 3-year limited warranty because we’re confident in the longterm performance of our tools. Take a step to improving the longterm performance of your hands with the 4V Screwdriver from Worx. You’ll notice the benefits immediately and still feel them well down the road.

Powered by a 27000 RPM brushless motor, this drill delivers 55 N·m torque for wood, metal, and concrete. Dual-speed (0-450/1800 RPM) with 22 torque settings ensures precision. Features all-metal chuck, 2000mAh fast-charge battery, LED light, non-slip grip, and belt clip for easy use.
| Pros for WORX - Nitro 20V SwitchDriver 2-in-1 Brushless Cordless Drill/Driver - Rotatable Dual 1/4" Chucks (Battery & Charger Included) - Black | |||
|---|---|---|---|
| There were no pros for this product— | Battery Life, Ease of use, Overall Performance, Size | Ease of use, Overall Performance, Size, Battery Life, Power | There were no pros for this product— |
| Cons for WORX - Nitro 20V SwitchDriver 2-in-1 Brushless Cordless Drill/Driver - Rotatable Dual 1/4" Chucks (Battery & Charger Included) - Black | |||
| There were no cons for this product— | Screw Holder | Bit Variety, Case Quality, Charging | There were no cons for this product— |
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Not very strong, but perfect for homeowner. FYI when you buy drill bits, make sure buy impact drill bits (or i think its called 1/4” hex shank).
Bill Posted
Very easy to use. It has all the attachments I needed. Staff was very helpful.
AnnaC Posted
Excellent. Thought the original was a perfect tool. Got this for nephews big fixer upper and it is amazing. Now comes with a bag larg enough for that other stuff you need on site. Simply a must have for around the house.
Kiki Posted