Customer Ratings & Reviews

The Assure Lock 2 Wifi enabled lock is a pretty good alternative to a key lock. The lock attaches to your deadbolt and operates by keypunch code or through the app by way of wifi or bluetooth. It takes a bit of mechanical know how to install, but if you follow the instructions you will get it installed properly. The app is necessary to install the lock and it helps you through the process. Once installed the app is very good to open and close the door. The keypad is smude resistent and the door lock is attractive from inside the house. The responsiveness to the keypunch is very good. The calibration on setup went very well.The response to wifi is good. I did have a problem once during testing with wifi, but I think it was just an odd occurence because it hasn't happened again. There is an item called door sense that you attach to the door and it tells you if the door is open or closed. Screwing this into the door might give you pause so I am sure some don't use this feature. I wish they could make that feature functional in another way that doesnt result in screwing into the door and boring a hole through the side of the door. Rest assured you can use the lock without that feature. There are many functions once the lock is installed. You can set up entry codes for different people in your family. What a great feature. You can auto lock at a set time after opening. You can set auto open feature so when you are on the property the lock unlocks. You can use these locks with Alexa, Google, and Apple. I use it with Alexa and overall it works fine with Alexa. It is too early to tell how things will go with the batteries, because these sort of devices can drain batteries fast. I am hopeful. The quality build, the excellent features, the very good app and stylish look make this a lock I would recommend. I am glad I own it. I expect years of use.

I recently installed this cutting edge smart lock and it has completely changed the way I feel about home security. The sleek, contemporary form of the Yale Assure Lock 2 makes an initial impression. It doesn't draw attention to itself, yet it gives every door it graces a touch of refinement. Because of the lock's sturdy construction, you can be sure that it will resist years of use and the elements. This locks key free operation is its most notable feature. You can stop searching for your keys and fretting that you could lose them. If you have a smart home assistant like Amazon Alexa or Google Assistant, you may use your voice to open the Yale Assure Lock 2 or enter your home using a PIN code, the Yale Access app, or even the Yale Assure Lock 2. You can easily disable any PIN codes you have created for family, friends, or service providers once they are no longer needed. It offers a great degree of convenience and control that conventional locks simply cannot equal. The Yale Assure Lock 2 was surprisingly simple to install. It can be set up in less than an hour if you're confident with simple DIY operations. The lock has detailed instructions and fits the majority of regular doors. The Yale Access app's step by step video tutorial was extremely useful. This smart lock raises the bar for home security with Wi-Fi bridge you can insert it in the lock after installation. Utilizing the Yale Access app on your smartphone, you can remotely lock or open your door from anywhere. Concerned that you left it unlocked while you were away? You quickly check your phone to calm yourself down. Another level of convenience is the capability to provide visitors temporary access while you are away from your house. Battery life is a problem with smart locks, however the Yale Assure Lock 2 has shown to be remarkably effective. It runs for months on four AA batteries, and the lock alerts you when the batteries are getting low so you're never caught off guard. The Assure Lock 2 stands up to Yale's reputation for being dedicated to security. Your information is protected by a most reliable encryption system, and the lock itself is impervious to tampering. The Yale Assure Lock 2 is a great advancement in home security, It is a standout option for anyone looking to replace their front door lock due to its key free simplicity, Wi-Fi connectivity and durable build, with the security, ease, and control it provides make the cost worthwhile. Its a convincing example of how intelligent technology can improve our daily lives and keep our houses secure. The Yale Assure Lock 2 ought to be at the top of your list if you're thinking about getting a smart lock.

This Yale Assure Lock 2 is essentially a Yale keypad deadbolt using August Lock app “smarts.” It’s the best of both worlds giving you all the security you need from Yale with all of the connectivity and automation features of an August Lock. It’s compact and easy to operate as well as being very solidly built. Pros: * Easy to set up and install. * Solidly built. * A backlit keypad with actual buttons to press. * App access and control. * Useful “passage” button to temporarily disable auto-locking. Cons: * DoorSense feature was tricky to set up. * As with all replacement door locks, installation requires a screwdriver and some know-how. * Not compatible with Apple HomeKey. Installation and Setup: The packaging is quite nice with everything clearly laid out and nicely labeled. The physical portion of the installation is typical for this type of product but it all starts in the app. First you get the app up to the point where it expects the lock to be ready. Then, for the actual lock installation, uninstall the old lock and then start installation with the deadbolt, the inside portion and the outside portion of the new lock. Finally, return to the app to get everything online, connected and set up the way you like. A few parts of the setup didn’t go 100% smoothly, but you can’t expect something like this to be perfect for everyone and a quick remediation fixed it all. The lock comes with an optional DoorSense magnet that is used to tell the lock when the door is open, ajar or closed. Calibration of this feature kept ending with success, but then the app would claim this feature wasn’t set up and it would show the door as open and locked when it clearly was closed and locked. I tinkered a bit more with it and finally got it working. The reset of the setup was super-easy. Usage: For those who have installed or used an August Lock before, this lock can be controlled by either the Yale Assure app or the August app, and seems to have the exact same functionality in both apps. You can set up keypad codes per person as well as guest codes. You can limit the use of anyone’s codes by date and time including a Vacation mode that disables keypad use but allows app use. My favorite feature that I have not seen on even the August locks was the “Passage” mode. With other locks that have an auto-lock feature, sometimes you are going in and out of the door often and the door keeps locking after 5 minutes so you have to unlock it again and again. There is a button on the inside portion of the lock that when pressed, deactivates the Auto-Lock feature until the next time you intentionally lock the door. No more annoying auto-lock when you’re walking in and out a bunch, but you do need to remember to lock it when you’re done to reset the feature. The keypad is nicely backlit and gives you the ability to press one button to lock the door behind you rather than waiting for an automatic lock or using the app. The inside lever that rotates to lock the deadbolt is smooth and easy to tell from a distance when the door is locked. Plus, there is a light on the inside of the door that you can optionally enable to show the door’s status from a distance. Of course, the app gives you full control of the lock remotely including access to all settings and the status of the door and lock. Through the app, you can set up and revoke guest access as well. You can even access the lock’s status and lock/unlock the door from an Apple Watch app. I haven’t been using the lock long enough to comment on battery life, but the lock takes 4 AA batteries and came with the long-life lithium variety. This is a welcome change to other brands of locks that use more specialized, expensive and harder to find batteries. I’m hoping to get at least the expected 3 months out of a set which would be a LOT more than I ever got out of competitor’s locks. Integration of the lock to various home systems is great! This model has built-in Bluetooth (for local connections) and WiFi (for remote access) without the need for a separate WiFi gateway box. It is compatible with Apple HomeKit, Google Home and Alexa. Just be aware that this lock is not compatible with Apple’s new HomeKey feature. Overall: Very easy to set up, nicely designed, solidly built and flexible. This lock has most everything you could want. The only thing missing, as an Apple user, is HomeKey support.

The Yale Assure Lock 2 is a Wi-Fi enabled smart lock that offers a variety of features to make your life easier and more secure. It can be locked or unlocked with a keypad, your phone or your voice using Google Home, Alexa, Apple Home, Samsung SmartThings, Philips Hue and even your Apple Watch. This is the only smart lock that I have seen that is compatible with majority of the smart home eco systems out there. It can also be unlocked automatically once you get close enough to the door. You can also use the Yale Access app to lock and unlock your door remotely, create and manage access codes, and receive notifications about your door's status. The lock can also be set up to be locked automatically once you close the door using Yales Door sense. Features: • Easy to install and use • Variety of features, including Wi-Fi connectivity, Backlit keypad, and voice control, Yale App • Secure, with Grade 2 certification • Compatible with Multiple Smart Home Ecosystem • Can be unlocked upon approach without touching your phone or lock • Can be locked automatically • Can setup multiple access codes • Real time notification of activity at the door • Backed by a one-year warranty The installation process for the Yale Assure Lock is very simple and all the accessories needed are included. For my installation, I simply needed to remove my old lock and start installing the Yale Assure Lock. The whole process took me about 30 minutes which included removing the old lock. In terms of security, Assure Lock 2 is Grade 2 certified, which means it meets the industry standard for residential security. It also features a few security features, including a keypad lockout and a tamper alarm. Overall, the Yale Assure Lock 2 is a great option for anyone looking for a secure and convenient smart lock. It's easy to install and use, offers a variety of features. I have been using the Yale Assure lock in my home for a few days now and so far its been working out great.

After spending time with the Yale Assure Lock 2, I don’t think I can ever go back to using an old, “dumb” lock. I’m not sure if one can call a door lock a game changer, but I certainly think this counts! Inside the box you’ll find nearly everything you need apart from a screwdriver and, potentially, a drill and associated bits. The lock itself looks very pretty. The exterior is small, but not tiny – it is exactly the size it needs to be. I do appreciate the physical buttons, rather than membrane buttons or touchscreens. It’s worth noting that this version does NOT contain any keyways. In other words, you cannot use or add on any physical keys here. If you are concerned about what to do should the batteries run out you should know that it would likely involved you ignoring battery warnings for a quite a while but also that there is an emergency option to hold a 9v battery to the exterior lock to power it enough to input your code. The interior part of the lock is a bit larger, but still smaller than a trade paperback novel. This houses the main mechanisms, so it must be larger. The turn for the deadbolt feels smooth and solid. The battery compartment also houses the WiFi module, which is a small plastic cartridge you insert during installation to add the WiFi capability. The box also contains several sized screws and everything else you need. The physical installation wasn’t any different from installing a standard “dumb” lock. While there is a small cable to thread from the exterior part of the lock to the interior part of the lock through a mounting plate, it was easy enough to do as a one-person job with just a Phillips head screwdriver. The caveat to this is that my door and the associated holes were all perfectly situated and sized already. Your milage will greatly vary depending on the size of your door, size of the holes on your door and on your frame for the strike plate. Please do your research ahead of time, as you may have to start doing some drilling or the lock may not even fit at all. The app guided me through all the installation steps, and I was also able to follow along with the included printed instructions. I’m a fan of printed instructions, so I’m glad I had them to refer to at several points. After the installation was completed, I was asked about setting up the WiFi, which was seamless, and then it did a firmware update that lasted roughly 8-10 minutes. From there I was all set! It was here that I wished there was a bit of a tutorial to the app, as I was just left dropped off on the main screen of the app not really knowing what to do next or what settings I should then look at. However, it was all very intuitive and after about fifteen minutes, I felt confident in using the app. I even went a step further connecting it to my Google Home and my Philips Hue setup (so some lights turn on when you come home!). Unlocking can be via app or PIN code. Either works seamlessly and easily. PIN codes are assigned to individuals via the app. This gives you the ability to see who has unlocked your door. You can make PIN codes work at all times, limit to certain days and time frames, or temporarily, after which the code is disabled. That’s a plethora of options for any situation, from caregivers and workers to short term property renters. PIN codes can be 4 or more numbers long. From the app, you must wait for it to connect to Wi-Fi or to Bluetooth first, then click a giant red button to unlock or lock it. I’ve never had to wait longer than about 20 seconds to connect, and I think a large part is that from my driveway my phone typically is barely connecting / losing its connection to my home network. If I’m next to the door, Bluetooth connects faster. My partner, using the app on their Apple Watch, says they’ve never waited at all for a connection. You can invite others to use the app on their own phones instead or in addition to PIN codes. In either case, the door is opened (or locked) in seconds. You can configure the app with whatever notifications you’d like, from specific people to only unlocks or even if your lock loses its WiFi connection. The lock comes with a host of extra features, too. You can set the device to Auto-Unlock with geofencing so as you approach your home it automatically unlocks. Using the door sense add on, which is included, but does require drilling into your door frame, you can have the door auto-lock as well as notify you if your door has been left ajar for too long. Both of those times are configurable. Usually at this point in the review I go over my negative thoughts, but I honestly do not have many here. I’ve mentioned that I wished the app would walk you through its features and options more, but that’s all. I think it’s rare with technology such as this to have such a great experience from unboxing to installation and setup, and usage without encountering any frustrations, but Yale seems to have pulled it off. If you’re in the market for a WiFi connected smart deadbolt for your home, I think you’d be hard pressed to find an option that is better than this one. This not only works but offers a bevy of options that is really more than necessary – all while looking stylish and being easy to install, too! I’ve already recommended it to friends and family, so consider this a recommendation for you as well!

The Yale Assure Lock 2 is a well built/easy to install door lock that will look good anywhere. I installed it within 20 minutes, you receive everything you need including batteries the wifi/doorsense module and multiple size of screws to fit just about all doors. All of the instructions are clearly laid out which makes the installation a breeze. Everything about the Assure Lock 2 screams premium product from the look, feel, installation and the app. This lock is beautifully designed and the buttons have a great tactile feel to them that makes me think they will hold up really well overtime. Besides the buttons having a great click to them they are way better than touch screen since you don’t have to wait for the lock to “wake” and unlike a touch screen there wont be a input that is missed because of weather. Now I can’t speak on the battery life since I have only used the lock for a few days however this will depend on how strong your wifi signal is how many features you’re using. In case your batteries ever do die there are two terminals underneath the lock where you can place a 9 volt battery if you get locked out. The app is very nicely designed and provides great information for giving access to family/friends and allows you to adjust the type of access you give people such as days/hours. There is a ton of features in the app (auto locking, voice assistance features, remote access, notification of who came/went etc) and the yale app works with both of the primary mobile operating systems. Two of things I enjoyed the most was locking the door with the push of the Yale button and “Passage mode” which is used when you want to come in and out multiple times and not have the door auto lock on you, which only works if you install doorsense module that is included. I only really had 2 issues with the Yale Assure Lock 2 and they are the thumbturn which just falls out and its something that is easy to lose and the second thing is that the latch is not adaptable/adjustable for the depth in the strike pocket (hole where the lock goes into). With this being a smart lock I think the calibration should be able to adjust it self if the strike pocket area is not deep enough. Now don’t get me wrong Yale lays out what the requirements are and even provides you with rulers for measurement so you can pre-measure everything, but being a smart lock this is something that should be adjustable. Overall the Yale Assure Smart Lock 2 in a great looking smart lock that is packed with functions that I would recommend to anyone in the market for a smart lock. Pros: • Easy instructions • Premium product • Great smart features Cons: • Thumbturn issue • Un-adjustable calibration

The Yale Assure Lock 2 WiFi is a Bluetooth and WiFi enabled smart deadbolt. This particular lock comes in a Nickel finish with physical push button keys on the keypad, but without a key slot. There are actually 8 different variations of this lock with combos of touch pad or keypad, keyed or keyless, and Bluetooth or Bluetooth+WiFi. Prior to getting this lock I have owned of the Bluetooth keypad version for nearly a year and had it installed on my front door. Installation The Assure Lock 2 installs onto your door the same as any other deadbolt but with just a few more steps for the electronics. I installed this lock on my rear door without any issue. Having installed this same lock on another door didn’t really give me any edge or insight because the install is straightforward. The DoorSense sensor is an optional install, but it is definitely worth it. I installed it via the recessed option, but I learned from the last install that the 5/8” bit specified is a little too large. I used a 9/16” spade bit and that gave me a nice snug fit. Once this was all done I used the app to calibrate the lock and set it up. My last install I ran into an issue at the calibrate step because the pocket in my door wasn’t deep enough for the deadbolt. I was relieved to find the pocket on this door was deep enough, so I got to skip the task of boring out some extra pocket depth. Once it was calibrated I configured the Wi-Fi module and linked it to my Google Home. Overall the install/setup took me about 30-40min to complete. Design The keypad is very discreet looking when mounted on the door. My other Assure lock has been mounted for a year and it still looks like new, so it holds up well. The interior facing part of the lock is a mix of black plastic and the satin nickel finish. The lock knob large and easy enough for even small children to turn. The exterior portion of the lock is just the small keypad face. The face is all black with the exception of the little “Yale” button at the top – its gray. There are 13 physical buttons 1-9, settings, checkmark, and the Yale button. You use the settings button while setting up the lock and programming in the code and that’s about it. The checkmark gets used to “enter” each code, while the Yale button acts as a code reset, lock button when leaving, and the button to press to light up the backlight at night. The backlight only lights up at certain times – by pressing the Yale button before entering the code, and after each code entry. The backlight stays on for 5-10 seconds before it shuts off from inactivity, or for as long as you are actively entering the code. With a correct code entry the backlight does a wave and a pleasant tone is played, while an incorrect entry flashes the backlight and a “entry denied” tone is played. The rest of the outdoor portion of the lock is the satin nickel part of the body that wraps around the sides. One the underside of the outer body is a battery contact point, which allows you to use a 9V battery to power the lock in case the battery dies while you are away. Inside the lock is where you install the Wi-Fi module. My Bluetooth lock can be upgraded with this module as well since they are essentially the exact same lock – the only difference between the 2 is the inclusion of the module with the lock. You can connect to this lock via Bluetooth, which has a range of 25-40ft or you can connect to the lock via Wi-Fi from the other side of the world. Features and Interaction While inside the app you can be connected either by Wi-Fi or Bluetooth to make changes. You can configure alerts, auto-lock/unlock, and grant user access. With the DoorSense sensor installed you can configure a “Door Ajar” alert for when you don’t close the door all the way, which prevents the lock from activating. The auto-lock lets you set a timer for the lock to secure the door – I keep mine set at about a minute. Also, with the DoorSense installed you can leave your door open without worrying about the door auto-locking. Using the keypad is a solid experience. You can enter the code as fast as you possibly can, and it will register every input. Its honestly the best keypad door lock I have used, and it still looks sleek. There are upsides to having physical keys as well. You don’t have to worry about an LCD potentially failing – something I have had happen with another smart lock. You can wear gloves when you punch in your code – unlike a touchpad. I also saw that it was easier for my smaller kids to accurately enter the code with the keys. Interacting with the door remotely is a pretty seamless experience. It feels like my phone establishes a connection faster remotely on Wi-Fi than it did locally on Bluetooth. That makes for an easy off-site usage experience. I occasionally will unlock my door for my kids coming home from school because they don’t have a phone for the Bluetooth interaction. Just like the Bluetooth version this lock uses your phone’s location to determine proximity and prep for the auto-unlock. As you approach your house your phone will start pushing the unlock code via Bluetooth. In my experience this starts happening about 2-3 blocks from home. The auto-unlock process is persistent so if you happen to enter into this range, but aren’t heading home you have to cancel or pause the process to stop your phone from pushes the unlock code. For most people I don’t think this would be an issue that comes up often, but it happens to me frequently because my GF and I live in the same neighborhood and go to each other’s houses often. That leaves my phone in a near constant state of trying to unlock my door until it eventually times out and fails. It takes a long time to fail – maybe up to a half hour or more (I haven’t kept track). For that reason I have thought about turning the auto-unlock off on my phone because I typically enter through the garage. I found that the door will unlock even when I come in through the garage, and never get super close to the door. The app is supposed to stop pushing the unlock code sometime after you are connected to your home Wi-Fi (indicating that you are inside already). It does this but it seems to be a little delayed, and I still get the occasional unintended unlock. Where it comes in handy is when I take my dogs out for a walk, which usually triggers the proximity feature because we walk far enough away. As far as the remote features go I still feel like the Bluetooth aspect is just OK. I wish there was a built in widget or something on my phone that I could toggle it on/off easily. That way it would be like a remote that only activates when I want it to rather than being a persistent push signal. On the other hand the Wi-Fi connectivity is great. It works really well and it seamlessly integrated into my Google Home ecosystem. I can use voice commands to unlock it. I have a routine at night that will check the lock status when I’m going to bed (peace of mind). The remote connectivity is quick and I have yet to have an issue with it. I have already used it several times to let people into my house without having to give out the passcode. Overview I still really like this lock. I was a fan of it when it was just my Bluetooth enabled lock, and the Wi-Fi version adds another layer of functionality that I am glad to have. The lock is well made, and being a year old user of the Bluetooth version I can speak to the longer term build quality. This is a solid smart lock and the Wi-Fi connectivity really completes the package.

The lock looks great and is very well made, very sturdy and heavy-duty feeling. The box and lock itself are pretty hefty which I was not expecting, but it's solid which I like. The installation was pretty simple and straightforward using the video walkthroughs in the app. Easy to connect to wi-fi, update firmware, and get synced up with our Google Home/Nest products. Very convenient to be able to lock and unlock the door anywhere using my voice, or via the app. It will be nice to provide access to family members or friends if necessary, as well as anyone we have dog or housesitting, and not have to worry about anyone losing a key or getting locked out. I've seen some reviews mentioning issues with auto lock and unlock, but we've not experienced any of those. Bear in mind, Yale states you need to be 200+ meters away from your lock before it enters that mode, so if you're just out for a walk in the neighborhood, you may not hit that threshold. But if we're going to and from work, shopping, etc. it has worked and unlocked every time we got home, even if one of us is already at home (which was a concern we had). We're interested to see what the battery life is like with it being connected to wi-fi via the smart module. It's unfortunate you can't check the battery level in the Yale Access App, but good to know we will be notified when the batteries need to be replaced. All in all, we're very happy with this purchase so far, less than a week in.

Yale impressed me with the first generation of locks connected by August, so much so I purchased one for every deadbolt in the house. The new generation of Yale locks comes with their WiFi bridge, which means no August wall wart. However, Yale being owned by the same company as August meant this lock not only will setup and work with the Yale app, but more importantly - I was able to add this existing lock to my already existing August app/setup and integrate it just as neat and tidy. First of all the Yale lock is a YRD430, which is an excellent lock with matte buttons as the keypad. It’s hard to verify, but I would assume these are PBT plastic to avoid the shiny and finger oil that ABS can pick up. I can tell you from experience, that after a couple of years, button keypad locks will show the locking code most used and fade, hopefully these buttons will last better than other locks I’ve had. The touchpad design of other Yale locks might be more durable long term, but it also shows fingerprints. The backlight is easy to see in all but direct sun, and has audible feedback to let you know when it’s active, and responding to a touch. The Assurance Lock system from Yale is still present, but there are no voice prompts. Instead the app is suggested to change all lock settings. In fact you won’t even find the settings code anywhere but the app. The app allows you to program different lock codes for different people. The YRD430 is powered by 4 AA batteries which are included (Energizer even). Physically the device is smaller and a bit deeper than the old module. The old lock stood it’s batteries upright in a row, while this lock has a chunkier throw side and larger throw as well. It doesn’t feel quite as sleek as the first generation, but then again it takes less vertical door space, which might have been a deterrent for some. Interestingly Yale’s Assurance system has a modular slot where different modules, potentially different technologies can be supported. This was true on my old locks, and here it is with the same pin out and module format in the YRD430. While my previous locks had an August branded module that connects to the August bridge WiFi adapter, this lock includes a native WiFi adapter. Time will tell if the batteries last well enough, but again, AA Lithium batteries will probably extend the runtime significantly. Basic locking/unlocking and custom code generation can all occur via the app remotely, which is where most of your day to day use cases will be. Smart wise, I had nothing but success with Alexa and the app locking, unlocking, and checking the status of the lock. You need to adjust some settings, but using my existing August connection I was able to add it. The operation is always fast, and reliable. Homekit I continue to have trouble with. I was able to get Homekit to recognize the device manually by entering the code on the printed sheet. My camera would not scan the small sticker and activate the device. Once activated it would show status, but for some reason not seem to function. Homekit for so many things has just never worked for me so I wouldn’t say it isn’t operator error. If anyone is intimidated by installation of this lock, I would recommend spending a bit of time just tearing apart your existing deadbolt. Once you get past the first screws, the whole lock makes total sense mechanically, and you realize your door has basically a hole in it with a conduit to the doorframe that the deadbolt itself rests in. I’ve installed quite a few deadbolts over the years, and this was not difficult at all. I did have to replace the lock portion despite my Yale Assurance locks. The two locks have different alignment with the screws. I had to play with the strike plate just a bit, but honestly it just took a few minutes of adjusting and seems to be the norm when working on older doors. Activating the module and lock were a breeze and as I mentioned: if you don’t like the Yale app, just use the August app as it works with this lock and WiFi adapter as well. Overall the YRD430 is an excellent deadbolt. I love the battery choice, the modular add in, and the smooth installation process - none of which has changed over the first generation. The WiFi module seems solid and the setup process was super solid. Alexa worked great once I set up the required voice code and enabled voice lock. Overall this lock is a huge win for me and a great upgrade to the first generation!

I did not realize till I downloaded the Yale Access App that Yale and August were one in the same. Went to set up my lock and it said I already had an account and already showed my old lock. So, it was already somewhat familiar in how the directions were straight forward and step by step through the app. The included install guide also has pages that you use to help measure and possibly cut holes in the door if that is what you need to do. However, having already had a deadbolt in my door it was simply remove a few screws, pull all the parts out and put the new ones in. One thing I found odd was that it comes with a Wi-Fi module, most other locks I have had, just had it built in. So, if you don’t want it to have Wi-Fi, you can literally just leave that part out. One thing I really like about this one is that it uses AA batteries, unlike some others using CR2 or CR123, which are not as common and usually more costly. And the most common question, what if the batteries die? Well, ask a neighbor for a 9 volt battery and attach it to the bottom 2 pins for a temporary charge to use your pin, besides you get warnings before you need to do that. I didn’t have dead batteries and the position of my door handle makes it impossible to try. Once installed you can set up the door sense magnet. You can mount it on the frame or tuck it inside the frame, requiring a little bit of drilling. However, once installed you can use that to auto-lock and sense when the door is ajar. Setting up your pin is simple, you can use the app to unlock it or you can have it sense your location so that when you get home it unlocks automatically. You can set up temporary access codes, scheduled times for access codes and even invite others directly to use the app on their device. The keypad lights up clearly on press of the first button and the keys feel responsive, so you know you pressed it along with a tone. You can also connect it to your voice assistance so they can give you status or help you lock/unlock as well. I do find the inside module is a little big and due to the size, makes it a little close using the round door handle I have. Overall it was a simple install and makes getting in and out of the door a little easier. It is nice to know that the door will be locked behind you and you can set it up to give notifications for everything, to include that the door has been left ajar. Now there is no need to make more copies of a key that someone will surely lose.

I really liked the Yale Assure Lock 2: from the outside it has a nice clean almost minimal look. Internal to the door it has a secure deadbolt that didn't make me feel like I was giving up security in order to add the convenience of smart features. I installed all of the mechanical deadbolts in our house, and I found it easy to setup the Yale on my entryway door: the step by step instructions were good at answering the questions I had to make sure it was installed correctly, including the door sense. Door sense is basically a magnet that you install into the door jam that allows you Yale lock to know when the door is closed vs open. I found the app setup relatively straightforward: At least as easy if not easier than most Google Nest products and far easier than Philips Hue to find my Yale Lock from within the App, sync it and get the app working. It was also really easy to add Yale Lock using Works with Nest functionality of my Google Home, this allows me to add the Lock to my Google routines and to ask my Nest Hub the status of the front door or to unlock it. The one tricky spot I had to tinker with to figure out was that I ad to make my wife a guest in the home and then upgrade her from guest to owner to give her the same abilities to manage our house and the door lock that I had. Overall I think this is a wonderful device: I like being able to look or ask google anywhere I am to make sure our front door is locked as we left the house and I also like that I can provide guest access to our dog sitters or baby sitters so they can use a temporary door code to get in and out without us having to worry about how many sets of keys to our house are floating around the neighborhood. In the limited time we've had this setup its been helpful and we've had no issues!

Having recently moved into a new house with a guest suite or in-laws’ quarters, we quickly realized that my elderly mother, our new housemate, regularly forgets to lock her separate front door. This was a problem because her side of the house has interior access to our side of the house and could pose as a security issue for her as well as my wife and I and our children. We installed a smart lock and camera on our front door as soon as we moved in to monitor traffic and ensure our house was secure whether we were home or away however my mom thought it was too bulky and didn’t want one on her side. After realizing how easy it was to just walk into her unlocked front door, none of us were comfortable with that and, after browsing the market, came across the new Yale Assure Lock 2. The new Assure Lock 2 has a much smaller exterior keypad in comparison to the one we have on our front door so we knew that would be part of the sales pitch. However, it also means it doesn't come with as many bells and whistles as the one we previously installed, which isn’t a bad thing when you’re dealing with explaining to an elderly person how the lock works. Having had some minor experience installing smart locks at our previous residences, the Yale Assure Lock 2 was the easiest one I have installed and took less than 30 minutes from start to finish. The “Cliff Notes” version of the installation process would simply be removing the previous deadbolt lock, unless, of course, you’re having to drill out holes in a new door, installing the new deadbolt where the previous one was using the included screws, placing the keypad on the exterior of the door, sliding the mounting bracket and interior latch on the inside of the door and securing it with the pre-installed screws, sliding in the Wi-Fi accessory and placing four of the included AA batteries in the in the interior compartment and finishing up through the Yale Access smart phone application. You’ll also want to install and calibrate the small magnetic Door Sense device on the interior of your door frame which allows it to tell whether the door is open or closed. Once you create a Yale account and sync the new lock to your account, you’re up and running. Within the smartphone app, you can add new users which is convenient when you have multiple persons living within the house, set your lock code, set up the Wi-Fi, allow access to your location so the lock will know when you are arriving to the house in case you want to enable the auto-unlock feature (super convenient by the way), and auto-lock feature which will ensure your door is locked within a set period of time from shutting it. You can also sync your voice control devices such as Alexa, Google or Siri to access the lock and perform functions as well. The Apple Watch even has an app you can install to control the lock. Overall this is a great option for those in the market for a smart lock made by a well know door hardware company which is very simple to install, easy to navigate in the smartphone app and aesthetically pleasing to those that want something more discreet.

Once installed, it was easy to connect. However, I could not easily find adequate instructions to change the initial code. I had to call and work with customer service. Now that it's working and we have our codes, I love this lock. Having the proximity unlock when you get home is very convenient. It'll relock itself after a predetermined time. The style and color are also very nice. I'd recommend this if you are at least a little internet savvy.

Was easy to install and set up. Do have some issues sharing acces with other iOS users. You can add it to their Home access but it won’t let them lock nor unlock. Had to set up individual codes

It is a really good lock. I especially like that it automatically locks after you close the door, based on the amount of time that you select. I wish there was a key, just in case.

Very easy to install. Very quick setup process. The only parts of the lock i couldnt use were the flush sensors or door open sensors because of how my door is on the wall. Other then that it works great! The closer you are to wifi the better it will work.

Lock works great. I can check its status, unlock and lock all remotely. Just know you need an additional component to get messages and alerts over wifi.

This works great! Super convenient and super user friendly. Purchased for my mother's house. Going to purchase one for mine.

easy to install and use. color is beautiful. the pushbutton lock works better than the touch screen one, in my personal opinion. It gives you the feedback that you are actually pressing the button.

This is the fastest and quietest electronic door lock i have had yet! Install was easy, wifi setup should be faster but easy to follow. Trick is to only use the QR codes on the side of the lock not the wifi module. Also, was only aboe to connect the lock to my 2.5g network. Took me 3 fails to realize that was the issue.