“I have a antenna box it has output and input what do I hook the antenna into and what doi hook up in the output”
Answer This Question
1-2 of 2 Answers
The Co-Axial Cable from your antenna gets screwed into the threaded input post titled 'RF IN' at the far left on the back of the unit' To get to the TV, you use one of the other plugs (RF Out, Co-Axial or preferably HDMI) depending on what input your tv has
Sorry, there was a problem. Please try again later.BASIC SETUP 1. The indoor antenna connects to the RF IN on the back of the TV box. 2. Then the TV box connects to your TV either using HDMI cable or the red, white, and yellow cables. 3. Do not connect the RF out to the TV. 4. After powering on your TV and TV Box you need to set your TV to the INPUT you used (HDMI 1 or 2, VGA, etc.). 5. Power on the TV Box with your Aluratek remote. You then TAP the menu button on the remote control for the Aluratek TV Box and go to channel search and run that. You can use the arrow keys on the remote control to move across the tabs at the top of each menu. The channel search will find the local channels available in your area. This can change depending on where the antenna is placed in the home. USB Thumb Drive: Use a 32GB card or smaller in size for best results.
Sorry, there was a problem. Please try again later.