“Why does the product specifications say it only has 5,000 mAh capacity when the description of the product says 25,000? I've read that it charges the average cell phone about 6 times, which is about 3,000-5,000 mAh per charge depending on the phone.”
Answer This Question
1-2 of 2 Answers
The 5,000 mAh number is most likely the capacity of one internal battery cell, while the full power bank uses multiple cells that add up to 25,000 mAh total. That is why the product title says 25K. Also, the actual number of phone charges can vary because power is lost during charging and different phones have different battery sizes. So 25,000 mAh does not always mean exactly five full 5,000 mAh charges.
Sorry, there was a problem. Please try again later.The discrepancy in the battery's specification can often occur due to labeling practices and standard usage guidelines. The total capacity of 25,000mAh represents the total charge of the internal battery cells. However, the rated capacity displayed, such as 5,000mAh, might be an indication of different factors. These factors include: Voltage Differences: The total capacity (25,000mAh) is calculated based on the nominal voltage of the internal cells (commonly around 3.7V). However, the rated capacity can be adjusted for a standard output voltage, such as 5V. When converting from one voltage to another, the total capacity will appear lower due to the energy conservation formula (Energy in Watt-hours = Capacity in Ampere-hours × Voltage in Volts). Labeling for Safety or Standard Regulations: Products may label the capacity per individual cell or as part of a specific group to comply with safety and industry standards. For instance, cells of 5,000mAh each can combine in parallel or series to total 25,000mAh. Energy Loss During Conversion: Energy is lost as heat during voltage conversion inside the power bank. This means not all stored energy in the 25,000mAh battery can be fully utilized, resulting in an effective capacity that's lower. For context, a 10,000mAh power bank, for example, often has an effective usable capacity of about 6,000-7,000mAh after factoring in conversion inefficiencies. Therefore, while the power bank may charge a typical phone several times (considering their 3,000-5,000mAh batteries), the apparent difference between the labeled capacity (e.g., 5,000mAh) and total capacity (e.g., 25,000mAh) is due to such technical and labeling conventions.
Sorry, there was a problem. Please try again later.