“After unboxing and initial boot, there is no display to my monitor. I've already troubleshoot the cables and monitor itself. The PC will boot but not display to monitor.”
Answer This Question
1-4 of 4 Answers
You need to make sure ypu're using the HDMI or Display port on the GPU not the Motherboard ports.
Sorry, there was a problem. Please try again later.Verify where the cable is plugged in it won’t display if your plugged into the motherboard not the Graphics Card
Sorry, there was a problem. Please try again later.We plug area into a different spot and it worked the intended spots didn’t work
Sorry, there was a problem. Please try again later.Usually, you will do the following to resolve no display or no boot issue. Please verify if the PC is connected to a working monitor using known good video cable and the correct input source from the monitor was selected correctly. Check the power cable was properly connected from the PC to a working surge protector or AC outlet and the power button is being pressed all the way down to trigger a power on signal. Also, please try to disconnect the power cable and let the unit drain for at least 10 minutes to reset and clear the memory. After doing this, please reconnect your AC cable then power on the unit.
Sorry, there was a problem. Please try again later.
