“I have this dryer. Where the on/off switch is, it has the word "lo" above it but not the word "hi" below it. I see the round button with the slit in it but there is no indication which way to turn the slit for 110 and 220 volts!!!!! Please advise.”
Answer This Question
1-2 of 2 Answers
It has a little slit like a flat screw would So use a flat screwdriver to turn to the voltage you are using
Sorry, there was a problem. Please try again later.Hello Ingrid! When looking at the dual voltage dial, turn right for 250 and left for 110. FOR DUAL-VOLTAGE DRYERS: For use in the U.S.A., the voltage selector switch should be placed in the 125 position. For use in several countries overseas, the voltage selec¬tor may need to be placed in the 250 position. Confirm the voltage available at each overseas location before using the appliance. For con¬nection to a 250-volt supply, use an attachment plug adapter of the proper configuration for the power supply. For 110-125 Volt Operation: Rotate the dual voltage switch to the 125 posi¬tion. In this position, the dryer has two settings. It provides two speeds and two heats—low speed and low heat on LO and high speed and high heat on HI. For 220-250 Volt Operation: First put the HI-LO switch into LO. Rotate the dual-voltage switch to the 250 position. At 220- 250V while set at LO, the dryer operates only at high speed with high heat. Do not attempt to operate the HI-LO switch or change to 125 when operating on 220-250V. The switches must be set and remain in the LO and 250 positions. A plug adapter may be necessary in certain countries.
Sorry, there was a problem. Please try again later.