What power connector does this require? null

Just plugs into the 4-pin Fan plug-in on your motherboard. If you only have a 3 pin it will still work, but I think it just means you won't be able to control the fan speed.

You connect them to your mother board header ( your motherboard should indicate where to put them ) and also it comes with a hub where you connect all the fans so you can control the rgb through the Corsair iQue software. The hub then connects to SATA for power.

Each of the 3 fans plug in using a 3-pin fan connection on the motherboard and a proprietary one to the light controller. The light controller plugs into a USB bus port on the motherboard. You can use a wiring harness for the fans (not included) but you will need to make sure that you have a powerful enough power supply or you could end up with over voltage issues.

Hello, For lighting, these connect to a controller that would be powered via SATA, for them to spin you would connect them all to the corresponding fan port. If you have anything else we can help with, please reach out: support.corsair.com -Art

“What power connector does this require?”

Asked by Hightower56 5 years ago

Answer This Question

See all questions & answers

CORSAIR - iCUE SP120 RGB PRO 120mm System Cabinet Fan Kit with RGB Lighting-Front_Standard

1-5 of 5 Answers

SATA power plug
Answered by Protogeek 5 years ago
Sorry, there was a problem. Please try again later.
Just plugs into the 4-pin Fan plug-in on your motherboard. If you only have a 3 pin it will still work, but I think it just means you won't be able to control the fan speed.
Answered by DLAUBthePCgod 5 years ago
Sorry, there was a problem. Please try again later.
You connect them to your mother board header ( your motherboard should indicate where to put them ) and also it comes with a hub where you connect all the fans so you can control the rgb through the Corsair iQue software. The hub then connects to SATA for power.
Answered by Elijah 5 years ago
Sorry, there was a problem. Please try again later.
Each of the 3 fans plug in using a 3-pin fan connection on the motherboard and a proprietary one to the light controller. The light controller plugs into a USB bus port on the motherboard. You can use a wiring harness for the fans (not included) but you will need to make sure that you have a powerful enough power supply or you could end up with over voltage issues.
Answered by Poduray 5 years ago
Sorry, there was a problem. Please try again later.
Hello, For lighting, these connect to a controller that would be powered via SATA, for them to spin you would connect them all to the corresponding fan port. If you have anything else we can help with, please reach out: support.corsair.com -Art
Answered by Corsair 5 years ago
Sorry, there was a problem. Please try again later.