A:AnswerGreetings,
This is a great question! This 7" pedestal is not compatible with the 650 series washer and dryer. The only compatible pedestal in Satin Nickel is model GFP1528PNSN. We hope this was helpful. Keep in touch with us! Mike@GEA
A:AnswerHello- Thanks so much for your question. We appreciate you checking with us. This pedestal is not compatible with this model. We recommend the following pedestal. SBSC137HDG https://www.geappliances.com/appliance/Front-load-pedestal-SBSC137HDG If you need anything else in the future, please let us know. We are always happy to help! Joyce@GEA
A:AnswerHello- Thanks so much for checking with us. We are happy to help! This can be vented on the side with a pedestal but not vented through the bottom if you have a pedestal. Please review pages 28-30 in the installation instructions. https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-3000206-5.pdf&_ga=2.229219743.2095697884.1647275862-1891068205.1646433146&_gac=1.140756486.1644625706.EAIaIQobChMI39DQi_T49QIVghB9Ch0YowtjEAAYASAAEgLi__D_BwE If you have any additional questions in the future, please let us know. We are happy to help! Joyce@GEA
A:AnswerThat's a great question! We offer a low-profile tray. The low-profile floor tray is ideal when you have a front-load washer on a pedestal with a drawer; the lower sides lets you easily open the drawer. We recommend model PM7X2 or PM7X3. The dimensions are: 29" x 33" (interior); 31" x 35" (exterior) and is 1.64" deep. We hope this helps, and if you have any additional questions, please reach out. We are happy to help!- Kianna@GEA
A:AnswerHello. Thank you for checking about this riser GFR0728SNWW. It is not a pedestal. This riser can be used with this washer and dryer and the riser is 7" in height x 28 inches wide x 28 7/16 inches deep. Hope this helps. Geoff@GEA
A:AnswerNot necessary but looks much better & easier for me to add my laundry stuff...It caused my washer to be off balance & I can't get it right messed with the legs several times
A:AnswerHello- We appreciate your purchase and will be happy to help! The dimensions on the riser are the following: 7 H x 28 W x 28 7/16 D We hope this is helpful! If you have any additional questions in the future, please let us know. We are here to help! Joyce@GEA
A:AnswerHi there - Thanks for reaching out to us about this! We're having trouble locating this washer model. So that we can answer your question accurately, please message us on social media with the complete model number. We hope to hear from you and will keep an eye out for your response. Thanks! -Mikayla@GEA
A:AnswerHello,
Thanks so much for reaching out. We're happy to answer your question! Many front load washers and dryers offer pedestals that can be installed under the individual unit. When a washer and dryer is stacked together, they cannot be installed with a pedestal for both safety and accessibility concerns. Be sure to stay in touch! Mike@GEA