Questions & Answers

Q: QuestionI have a PEM31SM3SS Microwave. It perfectly fits in the cabinet space. Now, I understand that GE does not make a replacement that has the dimensions necessary to fit my cabinet space. What the?!!! I need a recommendation that works!!!!!

Asked 5 years ago by Phil.

• A:Answer Hello Phil, Thank you so much for reaching out. We're happy to provide a recommendation for a new microwave. Model PEM31SFSS is a fine replacement for PEM31SM3SS. The optional built in kits (JX827SFSS; JX830SFSS) can fit a 27" space or a 30" space. This model will fit the same cutout space as your current model. You will need to use the built in kits for this model since they are made for that model. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the replacement for a GE Spacemaker II? Looking for the product that has the same dimensions as mine is built in, uses a custom trim kit and hangs.

Asked 5 years ago by TomG1121.

• A:Answer Hello TomG1121, Thank you for reaching out. We're happy to help you find a replacement. All our over-the-range microwaves are designed to fit into a 30" cabinet opening. This makes choosing a replacement a breeze. Please note however, that you will need to use the mounting kit that comes with the model. This is because the kit is made specifically for that model. One model we can recommend is JVM6175BLTS. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this model is to your satisfaction. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionNow wait a minute. Your product sheet shows the GE Profile PES7227SLSS is 13 1/2 inches high and GE's website says it's 14 inches high. In my last question I asked which one was correct. Your answer to me said it is 12 1/2 inches high. That can't be right

Asked 5 years ago by Chuck.

• A:Answer My GE profile microwave is 12" high.

  Answered 5 years ago by RachelSKVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this model GE profile have a bottom vent. If not what 24” microwaves from GE do?

Asked 5 years ago by Sue.

This question was asked about the related product: GE Profile - 1.1 Cu. Ft. Built-In Microwave with Sensor Cooking and Electronic Touch Controls - Black on Black

• A:Answer Hello Sue, Thanks so much for reaching out. We'll be happy to answer your question. Only our over-the-range microwaves have vents and they have top, rear, or recirculating venting. Our over-the-range microwaves are all designed to fit into 30" openings. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionPEM31SM4SS Built In microwave STUPID button broke. $5 item but $125 for service call I need a replacement microwave that will fit current trim kit. Suggestions plz.

Asked 5 years ago by GeProfile.

• A:Answer Hello GeProfile, Thanks for reaching out. We're so sorry to hear that the button on your microwave broke. We can understand how frustrating that would be. Model PEM31SFSS is a fine replacement for PEM31SM3SS. The optional built in kits (JX827SFSS; JX830SFSS) can fit a 27" space or a 30" space. Please note that you will need to use the current models trim kits since they are designed to fit that particular model. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy GE Profile JE2160SF with JX2130SH trim kit has failed. What is the best replacement model and will it need a new trim kit?

Asked 5 years ago by Chuck.

• A:Answer Hi Chuck, Thanks for reaching out. We're sorry to hear that your microwave has failed and will be happy to find a replacement model. We have found that model PEB7227ANDD is the most comparable replacement model with the trim kit JX7230SLSS. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionAfter 30 years of great service, I need to replace my GE JVM152H 001 spacemaker microwave. Is there a replacement unit with the same dimensions? Thanks.

Asked 5 years ago by Agpr.

This question was asked about the related product: GE - Profile Series 1.1 Cu. Ft. Built-In Microwave with Sensor Cooking and Defrost - White

• A:Answer Hi there Agpr, Thanks for reaching out. We're happy to know that our products have provided so many years of great service! We'll be happy to help you find a replacement. All our over-the-range microwaves are designed to fit into a 30" cabinet opening. This makes choosing a replacement a breeze. Please note however, that you will need to use the mounting kit that comes with the model. This is because the kit is made specifically for that model. While we do not have any models with the exact same dimensions, one model we recommend is JVM6175DKWW. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am trying to replace my broken GE Profile Microwave, model number PEM31SF1SS. I can't get exact dimensions due to having a trim kit installed. Is this the same model? The model numbers are almost the same, save for a missing number 1 in this model.

Asked 5 years ago by Floridian.

• A:Answer Yes... I believe it is the same dimensions

  Answered 5 years ago by KASZVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a microwave opening space that is 24 1/2" x 16 7/8". I want a GE Profile microwave with trim kit. What model microwave and trim kit do I order?

Asked 5 years ago by jlwonriver.

• A:Answer Hello jlwonriver - Thank you for your interest in GEA microwaves. We will be happy to help locate the best possible replacement. The closest fit we have for the measurements you provided would be the PEB7227ANDD microwave with the stainless steel 27" or 30" trim kit. We recommend reaching out to us with your current microwave model number so we can compare the required dimensions and find your desired finish and features. Thanks so much! - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi, we have a built in GE Profile microwave PEB1590SM2SS that sits right above the GE Profile oven. Need to replace the microwave that failed. What would be the replacement model and do we need a new trim or can we use the existing one? Thanks

Asked 5 years ago by Giovanni.

• A:Answer Hello Giovanni, Thank you so much for reaching out. We're happy to provide a recommendation. We have found that model PEB9159SJSS is the closest comparable model. Please note that you will need to use the appropriate trim kit since they are made model specific. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to install a GE Model # PEM31SFSS microwave oven under a cabinet. Does the mounting kit come with the new microwave or is it an additional kit? Thank You, Steve B.

Asked 5 years ago by Steve.

• A:Answer Hello Steve - Thank you for reaching out about this excellent microwave. When building this microwave into cabinetry, a trim kit is needed. This is not provided with the unit but can be purchased separately. The trim kits for model PEM31SFSS are the 27" JX827SFSS or the 30" JX830SFSS. Please let us know if you have any more questions. - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi. My SpaceMaker JEM31SF01 looks like it’s done. What GE Microwave will fit perfectly in its space? Thanks!

Asked 5 years ago by GlowUp.

• A:Answer Hello Glowup - Thank you for being a part of the GE Appliances family. We're sorry to hear your current microwave has seen it's last day but we'll be happy to help find a replacement. Although, it looks like you are already on the right track. Model PEM31SFSS has the same cutout installation requirements as your current JEM31SF01 unit. You will also need one of the trim kits to install, either the 27" JX827SFSS or the 30" JX830SFSS. Stay in touch! - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE spacemaker model JEM25GY002 that is built in. What is the replacement for it that will fit in my current cabinet opening? Thanks.

Asked 5 years ago by traci.

• A:Answer Hello Traci - We are so happy to have you in the GE Appliances family and will be happy to help. Model PEM31SFSS has the same required cutout dimensions in the cabinetry as your current model. It will make a wonderful replacement in your kitchen. The trim kits for the new model are the 27" JX827SFSS or the 30" JX830SFSS. Let us know if you have any more questions. - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace Ge Profile PEM 315M1SS microwave which in hanging under a kitchen cabinet. Is it possible to buy a new one that will work with the hardware currently holding up the current one? What would be the replacement model for the old one?

Asked 5 years ago by Confused.

• A:Answer Hello Confused - We are happy to answer any questions you may have about our appliances. The model PEM31SMSS and this, PEM31SFSS unit, use the same undercabinet hardware hanging kit. However, we do recommend changing out the hardware to maintain the proper integrity. Please let us know if you have any more questions. - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionYou recommended the Profile PEM31SFSS to replace our GE Monogram microwave.. Your trim choices are: JX 827SFSS - 29 inches or the JX830SFSS for 30 inches. Our opening is 15" H and 28 1/4" W. Which one will work? Do you install? Thanks

Asked 5 years ago by Maria.

• A:Answer Hello Maria - Thank you for following up on replacing your microwave. The JX827SFSS is 27" wide from the outside edge of the trim. Both trim kits are used for the same size cutout. The distinguishing difference is the width of the sides of the trim. If this is installed above an oven, the trims are designed to match either 27 or 30 inch width ovens. - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE model number JE2160SFOO1 BUILT IN MICROWAVE WITH A TRIM KIT(TRIM KIT MEASURES 29/1/2 X 19 INCES) WHICH GE MICROWAVE WILL FIT IN TO REPLACE AND WHAT TRIM KIT IS RECOMMENDED

Asked 5 years ago by sparkles.

• A:Answer Hello Sparkles - We're always happy to help find the best possible appliance for your kitchen. Our recommendation is model PEB7227ANDD as it requires the same cabinetry cutout as your current unit. The 30" trim kit for this replacement would be JX7230SLSS. Hope this helps. Keep in touch! - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi, I have to replace the built in Model PEM31SM1SS. Which model should I use and could I use the existing trim kit? Thank you.

Asked 5 years ago by Tatomato.

• A:Answer There is only one choice, the PEM31SFSS (may also be listed as PEM31SF4SS) There is a very small difference in the outside dimensions but the existing Trim Kit will work if you drill a couple of new holes.

  Answered 5 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an old J VM 132 K GE Spacesaver Microwave Oven Built In Dimensions are approx 29.75 x 13.5 x 14 Is there any built in Microwave that will fit in that space? Most of the new ones have a depth and height over 15:, which is too big.

Asked 5 years ago by Micro.

This question was asked about the related product: GE - Profile Series 1.1 Cu. Ft. Built-In Microwave with Sensor Cooking and Defrost - White

• A:Answer I purchased earlier this year: GE Model PEM31DFWW, SKU: 2557116 Product Height: 12 1/8 inches Product Width: 24 inches Product Depth: 12 7/8 inches Maybe this one will fit. Works great

  Answered 5 years ago by TaraRVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionLooking to replace my under the counter microwave (Stainless steel) model #JEM31SFO1, this model is discontinued. The dimensions are 1.0 cu. Ft. Capacity; dimensions are 11 3/16 H x 23 7/8 W x 12 9/32 D. Any suggestions of a microwave with these dimension

Asked 5 years ago by Yvonne.

This question was asked about the related product: GE - Profile Series 1.1 Cu. Ft. Built-In Microwave with Sensor Cooking and Defrost - White

• A:Answer Hello Yvonne, Thanks so much for reaching out. We're happy to help you find a new microwave. We have found that model PEM31SFSS is a great replacement. While this model is slightly bigger, it will fit the same cutout requirements. If you have any other questions, please feel free to reach out to us via social media or through our Contact Us page. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question