“What are the required minimum and maximum cutout dimensions for this model; what is the overhang of the top past the chassis?”

1-1 of 1 Answer

• Hello - The cutout dimensions for this model are: 33-7/8 x 19-1/8. If a 30” clearance between the cooking surface and overhead combustible materials or metal cabinets cannot be maintained, a minimum clearance of 24” is required and the underside of the cabinets above the cooktop must be protected with not less than 1/4” insulating millboard covered with sheet metal not less than 30 gage (0.0125”) thick. Please ;et us know if you have additional questions. Warm regards. -Don@GEA

  Answered by GE Answers 2 years ago

  Helpful (0)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.