“I have a 31SM4SS that needs to be replaced. It fits tightly on sides and top to cabinet. Do you have a replacement for this microwave. I don't think a mounting kit was put in. Also the cabinets are not standard side and not very deep. thanks”
Answer This Question
1-1 of 1 Answer
Hi replacement, Thank you for your question. I am happy to help. If using a trim kit, the replacement model is PEM31SFSS: http://products.geappliances.com/appliance/gea-specs/PEM31SFSS Keep in mind, if not using a trim kit, the microwave will need adequate air clearance on each side, the rear and the top to function properly. This allows good circulation for the intake and discharge air vents. Countertop models need the following:. ~3" of clearance on both sides and the top ~1" clearance in the rear ~The front edge of the microwave (measured at door) should sit at least 3" or more back on the counter or shelf to avoid accidental tipping. ~If located on the counter near a range, we recommend locating it at least 2 ft away. ~Do not place near or over a heat source. You may want to consider building in with a kit. The kit numbers are: JX827SFSS (27 inch) JX830SFSS (30 inch) http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240381_pem31sf_c2.pdf I hope this helps. Thank you for checking with us. Lisa from GE Appliances.
Sorry, there was a problem. Please try again later.