“What is the true depth of this unit, i.e., the depth from one edge of the washer top to the other.The pictures look like the 32" depth is measuring the bulge of the door. How close can it be installed to the wall after connecting hoses?”
Answer This Question
1-2 of 2 Answers
Hi there - those are great questions! The case depth (rear to the inseam) without the curved front is 26". For example, if installing this with side cabinets, this would be the "body" that's in the cabinet. -- The minimum clearances are 0” for the rear, sides, top, and front. However, to enable 0” clearance on the back of the Combo, you must use 90° elbow hoses. Otherwise, you may require some additional clearance to avoid rubbing of the hoses against the back wall. For more information, see the Installation Instructions on page 22 of the Use and Care Manual. We hope this is helpful and reach out anytime with additional questions. Have a great day! Lauren@GEA
Sorry, there was a problem. Please try again later.On the top, measuring front to back, it's aprox 26" give or take 1/2". The front edge is rounded, so it cannot be measured accurately. As far as the hoses, I would think the unit would have to be min of 4"-6" space behind the unit to allow for steel braided hoses to flex without kinking.
Sorry, there was a problem. Please try again later.