“filter light not coming on yet after 3 weeks of use I have 2 Honeywell genius 5 air purifiers and they been running straight for 3 weeks now but the filter light does not show the filter getting dirty. is there a time limit for this. thank you .”
Answer This Question
1-5 of 5 Answers
I think the filter meter goes based on hours used and at what level the purification is set to to determine how fast the meter fills, for example I have mine set to level 3 purification and it took at least a month and a half of constantly running before the meter started to fill up so yours should eventually start to fill the gage with time, another tip the instruction manual doesn't tell you is you have to wait for the filter meter to completely fill before it lets you reset it.
Sorry, there was a problem. Please try again later.Hi Depending on which series of Air Genius Air Cleaner you have, there should be some sort of indicator that will tell you when you need to clean the filter. Mine has been running for a little over a month and just showed the first bar on the filter gauge ( I have a series HFD320 cleaner ) . According to the owners manual the ifd filter should be cleaned every three months or when the cleaner indicates the filter is dirty ( whichever comes first )
Sorry, there was a problem. Please try again later.The owners manual says the filter will need replaced or cleaned every three months or so.
Sorry, there was a problem. Please try again later.It will! Mine did the same thing.
Sorry, there was a problem. Please try again later.A) Thank you for your interest in our product. Your air purifier is working fine, but you need to allow more time. The change filter function is designed to remind you after almost 3 months of continuous use. I hope this information is helpful! Please contact us at 1-800-477-0457 or [email protected] if you require further assistance.
Sorry, there was a problem. Please try again later.