“Listed under specifications it lists number Of Internal 2.5" Bays and says 1. Is this bay available or it is occupied by the 64GB eMMC ? Is the 4 gigabytes of ram installed soldered and is it occupying one slot or both slots ?”

Asked by Parker 5 years ago

1-2 of 2 Answers

The ram upgrade is easy, only requires that you take out 8 Phillips screws from the back ( make sure to look under the rubber bumpers on the bottom). Pull off the back and the ram should be right there, gently pull apart the two prongs holding the ram in and replace.
Answered by ramupgrade 5 years ago
Sorry, there was a problem. Please try again later.
No, this series of laptops does not have an internal 2.5" bay. I will report this to get it corrected. The memory is expandable to 8GB, 12GB, or 16GB, it is not soldered on the motherboard. The SSD can be upgraded as well. Adding memory or upgrading the 64GB SSD requires significant disassembly.
Answered by HP Team 5 years ago
Sorry, there was a problem. Please try again later.