“what would be a good graphics card to add that is not too expencive”
Answer This Question
1-1 of 1 Answer
I put a 1050ti in mine, had to remove the mounting bracket from the gpu to get it to fit, and since the power supply included is only 160w I had to set up a secondary 300w PSU with a jumper on the MB supply to fool it into thinking it was connected, the stuck a 2x4pin molex to 6 pin pcie adapter(cost like an extra 6 bucks) on it and it fired right up. Just have to turn the gpu's power on before you turn on your pc. Its like 2 step authentication for your hardware, lol. Hope this helps. Also, apparently the Erica 2 supports SLI and Crossfire, so you should be able to use both the 1050 and on board vega11 at the same time. Im using all four outputs(2 old 1080p monitors, a 4k smart TV and a projector )and so far so good. Watch your Temps though, the small case heats things up quick, may need additional cooling.
Sorry, there was a problem. Please try again later.
