“When not in use , is the green light supposed to stay on ?”
Answer This Question
1-6 of 6 Answers
When you power it on by long-pressing the power button the light turns green letting you know it’s ready to be used. You then cycle through the three power levels by quick-pressing the power button 1,2,and 3 times. When you quick-press the power button a fourth time it will be put in standby and the light will stay green letting you know it’s still ready to be used: If you keep it in standby mode for about 5 min, not pressing any buttons, then it automatically turns itself off fully, the light turns off, and you will need to do another long-press to power it on again. All this only applies if you have unplugged it from the charger. The light stays on if you have it plugged in to indicate its charging level. I don’t think it’s recommended to use the hypervolt while it’s plugged in.
Sorry, there was a problem. Please try again later.No, hold the power button on the back of it for 3-5 seconds (maybe more) and it should turn off. The ring at the bottom will shut off when it turns off. The light could make for a nice nightlight since it is BRIGHT in a dark room!
Sorry, there was a problem. Please try again later.Yes. Stays on for 4 or 5 mins before it completely shuts off
Sorry, there was a problem. Please try again later.No. Press and hold until the green light turns off.
Sorry, there was a problem. Please try again later.With time it powers itself down, so it will stay on for a bit after use
Sorry, there was a problem. Please try again later.Hi there! The green light indicates that the device is powered on. You will press the button to get to the 3 different levels. If you press the button a fourth time, the device will stop percussing but will stay on. You can power off the device by holding the button down again, just like when you powered the device on. Please let us know if we can assist with anything else!
Sorry, there was a problem. Please try again later.