“How do I change the hinges on the 115 can insignia beverage cooler?”
Answer This Question
1-1 of 1 Answer
Thank you for your question. To change the hinges on your Insignia 115-Can Beverage Cooler, please ensure the cooler is unplugged and completely empty. First, adjust the leveling feet to their highest position. Next, carefully use a blade to remove the rivets that secure the existing hinges. After removing the rivets, use a blade to gently pry off the hinge covers. Then, using a Phillips screwdriver, remove the hinge bolts that attach both the upper and lower hinges to the cooler and the door. Once the bolts are removed, you can detach the upper hinge and then carefully lift and remove the glass door from the cooler. Next, use a Phillips screwdriver to remove the door stopper screws and detach the door stopper. Following this, use your Phillips screwdriver again to remove the bolts securing the lower hinge and the adjacent leveling foot. Now you can attach the lower hinge and the leveling foot to the opposite side of the cooler, ensuring they are securely fastened with the bolts. Carefully replace the glass door onto the cooler, aligning it with the newly installed lower hinge, and then reinstall the upper hinge, making sure the door is properly aligned and the door gasket seals tightly. Finally, adjust the leveling feet as needed to ensure your cooler sits level. If you have any other questions or need further assistance, feel free to ask! - Mae | Insignia Support
Sorry, there was a problem. Please try again later.